• Computers and Concrete
• /
• 제5권2호
• /
• pp.89-100
• /
• 2008

This research examines the engineering properties and color intensities of mortar containing different amounts of fly ash (0, 5, 10 and 20%) mixed at different water-to-binder ratios (w/b = 0.23, 0.47 and 0.59) and exposed at different temperatures (T = 25, 100, 200, 400, 600 and $800^{\circ}C$). Results show that there is greater mass loss on ignition with high w/b and higher temperatures. In addition, the color channel image analyzer (Windows software written in Delphi) is utilized to study the relationship between the curing temperature and intensity of three primary colors, red, green and blue (RGB), of the fly ash mortar specimens. The results show that the RGB intensities on the specimen surface increases from that at $25^{\circ}C$. The mortar specimen becomes white with increase in w/b but without the addition of fly ash. Moreover, for mortar specimens with greater content of fly ash, red on the specimen surface has the greatest increase in intensity at elevated temperature. Observation the variations in color on the specimen surface may help estimate the highest elevated temperatures that concrete structures can withstand.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.81-95
• /
• 2006

표고버섯 골목의 바이오에탄올 생산 자원으로서의 활용 가능성을 모색하고, 새로운 당화 공정으로 주목받고 있는 초임계수 가수분해 공정에 대한 기초 기술을 제공하기 위하여 버섯 골목으로 사용되는 상수리나무 정상재를 다양한 초염계수 가수분해 공정에 적용하고 분해산물의 분석을 실시하였다. 초임계수 가수분해 반응 시간 및 온도의 증가에 의하여 수용성 분해산물 및 비수용성 잔사의 색 진해짐, 분해율의 증가 그리고 비수용성 잔사의 결정화도가 증가하였다. 반응 압력의 증가는 낮은 반응 온도와 짧은 반응 시간 조건에서만 분해 산물의 색변화 및 분해율의 증가에 영향을 주었다 초염계수 가수분해는 반응 초기에 hemicellulose의 분해가, 반응 후기에는 cellulose 분해가 진행되었다. 반응 시간의 증가는 당화 수율을 향상시켰고 반응 온도의 증가는 $415^{\circ}C$까지는 당화 수율을 증가시켰지만 $415^{\circ}C$ 이상에서는 급격히 감소시켰다. 낮은 반응 온도조건에서 반응 압력의 증가는 당화 수율을 증가시컸지만, 높은 반응 온도 조건에서는 오히려 당화 수율을 감소시켰다. 확인된 당화 수율의 결과를 토대로 상수리나무 정상재의 최적 초엄계수 가수분해 조건은 $415^{\circ}C$, 23 MPa, 60초로 결정하였으며, 당화 수율은 2.68%로 확인되었다. 결정된 최적 조건에서 골목의 초임계수 가수분해를 실시한 결과 당화 수율이 3.58%로 정상재의 당화 수율보다 높았다. GC-MS를 이용한 수용성 분해산물의 분석 결과, 주요 분해 산물은 1,1'-oxybis-benzene과 1,2-benzendicarboxylic acid로 확인되었고, 낮은 분해율을 보인 반응 조건에서는 pentadecanoic acid, 14-methyl-heptadecanoic acid 등과 같은 지방산류가 공통적으로 검출되었다. 반응 온도 및 시간이 증가함에 따라 phenol, benzene류의 증가가 확연되었지만 비수용성 잔사에서는 반응 압력의 차이에 의한 분해 산물의 변화는 없었다. 비수용성 잔사의 성분 분석 결과 60.6~79.2%의 holocellulose를 함유하고 있었고, 산 촉매 가수분해에 의하여 49.2~67.5%의 당화 수율을 보여주었다. 희산을 이용한 수용성 분해산물의 2차 가수분해에 의하여 수용성 분해 산불 내 당화 수율이 큰 폭으로 향상되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.70-77
• /
• 1999

목질폐잔재중 용이하게 입수할 수 있는 간벌재를 이용하여 그 기초적 제탄 기술을 검토하고, 이 탄화물을 이용하여 토양개량, 탈취, 수분 등의 흡착, 미생물활동 담체, 하천등 수질정화제 등으로 이용하는데 기초자료를 얻을 목적으로 탄화물의 성능을 조사하였다. 간벌재의 공업분석결과 회분 0.22~0.73%, 휘발분 77~80%, 고정탄소 약 10~14% 범위로 나타났다. 간벌재의 탄화 수율은 온도가 높아질수록, 탄화시간이 길수록 낮게 나타났고 수축률은 높게 나타났다. 수율은 낙엽송, 리기다소나무, 소나무가 높았고, 잣나무, 굴참나무가 낮았다. 탄화에 의한 수축률은 목재의 수분에 의한 수축률과 같은 경향을 나타냈다. 탄화후 비중은 각 수종에서 약 50% 감소했다. 탄화물의 공업분석은 회분 0.89~4.08%, 휘발분 6.31~13.79%, 고정탄소 73.9~83.5% 였다. 수소이온농도는 온도가 높아질수록, 탄화시간이 길수록 높게 나타났다. 탄화온도 $400^{\circ}C$의 경우 약 pH 7.5를 나타냈고, $600^{\circ}C$와 $800^{\circ}C$의 경우는 차이가 거의 없이 약 pH 10정도를 나타냈다. 보수성은 본 실험의 탄화온도와 시간의 조건에 따른 영향 없이 비슷한 값을 나타냈다. 초기 24시간 내의 보수성은 시료무게의 약 2.5~3배 정도이고, 그후 평형함수율은 2~10%의 범위를 나타냈다.

• 한국수산과학회지
• /
• 제43권2호
• /
• pp.139-145
• /
• 2010

This study investigated the optimum salinity and temperature conditions for mass culture of the brackish water flea, Diaphanosoma celebensis. Community and individual cultures of flea were maintained in 1 L beakers and 3 mL vessels (of a 12-well culture plate), respectively, and fed green algae, Tetraselmis suecica. In salinity experiments ranging from 5 to 34 psu, continuous growth of flea populations was found up to 34 psu. However, the specific growth rate and life span of females showed decreasing tendencies with the increase of salinity. The highest maximum density and offspring number were 33.6 individuals (ind.)/mL and 55.3 ind. at 10 psu, respectively. In the temperature experiments ranging from 20 to $40^{\circ}C$, population growth of D. celebensis increased continuously until $35^{\circ}C$ and then decreased over $40^{\circ}C$. The specific growth rate was significantly higher at 25 and $30^{\circ}C$ than at 20 and $40^{\circ}C$. Female life span tended to decrease with temperature increase. The highest maximum density and offspring number were 52.3 ind./mL and 46.0 ind. at $30^{\circ}C$, respectively. These results suggest that the optimum salinity and temperature for mass culture of D. celebensis may be 10 psu and $30^{\circ}C$, respectively.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권3호
• /
• pp.108-113
• /
• 2007

The performance of a solar water heater incorporating evacuated tubes was evaluated using a transient simulation program, TRNSYS. Simulations were performed for $60^{\circ}C$ of hot water load temperature and for 280 liter of daily hot water volumes and three 400 liter of storage tank volumes. Three patterns of daily hot water consumption profile were used in the present study (morning, lunch and evening). The results show that the increase in solar fraction depends on the load profile, as well as the collector efficiency coefficient. Hot water draw profile has a large effect on the performance of the SDHWS, the morning load profile has the highest solar fraction. The annual solar fraction of the system, at the weather conditions of Jinju is approximately 84% at lunch load pattern, the 280 kg of load volume, 400 kg of tank volume and the $60^{\circ}C$ of load temperature.

• 설비공학논문집
• /
• 제21권11호
• /
• pp.621-628
• /
• 2009

The objectives of this study are to analyze the performance of a river water-source heat pump and to carry out economic assessment for the heat pump. The COP of the river water-source heat pump was 3-21% higher than that of the air-source heat pump because river water provides stable operating temperature compared with air temperature throughout the year. The economic analysis was carried out by comparing the initial and operating cost of the river water-source heat pump with those of the conventional air-source heat pump. The ratio of the life cycle operating cost to the life cycle cost increased with the increase of building capacity. The payback period was found to be less than 3.5 years when the capacity of the river water-source heat pump was larger than 10 RT.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.425-428
• /
• 2006

The bigger of concrete strctures by a construct technique improvement, and the increase of the cement quantity which is caused by with use of the high-strength concrete for the load-carrying-capacity and a durability cause temperature cracks by a heat of hydration. The temperature crack due to the heat of hydration classified a nonstructural crack. but it has a bad effect on durability of concrete structures. especially, in case of a subway concrete box structure, when a water-proof facilities is beaked on an outer-wall, the water leakage occurs through a penetration crack generated from a wall of the concrete structure too. This paper, for the subway concrete box strucuture, the use of blended cement, the temperature of air and concrete, control joint, was considered and analysed by a three dimensional finite element method.

• 자연과학논문집
• /
• 제9권1호
• /
• pp.83-88
• /
• 1997

임계 혼합물인 Lysozyme 과 물의 임계온도 근처에서 임계현상을 연구하였다. 자기유도 타원편광축회전에 의한 제3차 비선형 광학감수율을 상전이 온도 근처에서 측정하였으며, 불순물인 소금의 양의 증가는 상전이온도를 높이고 글리세롤 양이 증가함으로서 상전이 온도가 감소함을 관측하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.125-131
• /
• 2002

This paper was studied on the effect of temperature on corrosion of absorption refrigeration systems using $LiBr-H_2O$ working fluids. In the fresh water and 62 % lithium bromide solution at $70^{\circ}C$, polarization test of SS 400, Cu(C1220T-OL) and Al-Ni bronze was carried out. And polarization behavior, polarization resistance characteristics, corrosion rate(mmpy) and corrosion sensitivity of materials forming absorption refrigeration systems was considered. The main results are as following: (1) As the experimental temperature increase, the change of corrosion rate of Al-Ni bronze become duller than SS 400 and Cu in 62% lithium bromide solution. (2) According as corrosion environment is changed from fresh water to 62% lithium bromide solution, potential change of Cu and Al-Ni bronze become less noble than SS 400. (3) The corrosion sensitivity of Al-Ni bronze was duller than that of Cu and SS 400 in 62% LiBr solution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.84-87
• /
• 2001

In this paper, degradation and dielectric properties of XLPE sheets moved from 22/154kV power cables were investigated. At the results of dielectric property of 22kV/154kV XLPE sheet, We earned that $tan{\delta}$ is $7.4{\times}10^{-4}$, $2.15{\times}10^{-4}$ and dielectric constant is 2.3, 2.24. Temperature dependance of $tan{\delta}$ inclined to increasing with temperature and increase of $tan{\delta}$ of 22kV XLPE sheet is higher than it of 154kV XLPE sheet. And increasement of XLPE sheet with water is higher than it without water.