• Title/Summary/Keyword: water soluble chloride

Search Result 126, Processing Time 0.029 seconds

Resistance of Cementitious Binders against a Fall in the pH at Corrosion Initiation

  • Song, Ha-Won;Jung, Min-Sun;Ann, Ki Yong;Lee, Chang-Hong
    • Corrosion Science and Technology
    • /
    • v.8 no.3
    • /
    • pp.110-115
    • /
    • 2009
  • At the onset of corrosion of steel in concrete, hydrogen ions usually evolve in the process of electrochemical reaction, thereby decreasing the pH of the pore solution, which can be buffered by cement hydration products, as being representatively illustrated by calcium hydroxide. Hence, a fall in the pH is dependent on properties of cement hydration (i.e. hydration products and degree of hydration). The present study tested acid neutralization capacity (ANC) of cementitious binders of OPC(Ordinary Portland Cement), 30% PFA(Pulverized Fuel Ash), 60% GGBS(Ground Granulated Blast Furnace Slag), 10% SF(Silica Fume) to quantify the resistance of cement matrix to a pH fall. Cement pastes were cast at 0.4 of a free W/C ratio with 1.5% chlorides by weight of binder in cast. Powder samples obtained crushed and ground specimen after 200 days of curing were diluted in still water combined with different levels of 1M nitric acid solution, ranging from 0.5 to 20 mol/kg. Then, the pH of diluted solution was monitored until any further change in the pH did not take place. It was seen that the pH of the diluted solution gradually decreased as the molar amount of nitric acid increased. At some particular values of the pH, however, a decrease in the pH was marginal, which can be expressed in the peak resistances to a pH fall in the ANC curve. The peaks occurred at the variations in the pH, depending on binder type, but commonly at about 12.5 in the pH, indicate a resistance of precipitated calcium hydroxide. The measurement of water soluble chloride at the end of test showed that the amount of free chloride was significantly increased at the pH corresponding to the peaks in the ANC curve, which may reflect the adsorption of hydration products to chlorides.

Solute patterns of four halophytic plant species at Suncheon Bay in Korea

  • Choi, Sung-Chul;Choi, Deok-Gyun;Hwang, Jeong-Sook;Kim, Jong-Guk;Choo, Yeon-Sik
    • Journal of Ecology and Environment
    • /
    • v.37 no.3
    • /
    • pp.131-137
    • /
    • 2014
  • To investigate the solute pattern of salt marsh plants in Suncheon Bay in Korea, plants and soil samples were collected at three sites from July to September 2011. The soil pH around the investigated species was weakly alkaline, 6.9-8.1. The total ion and Cl- content of site 1 gradually increased, while those of site 2 and site 3 were lowest in August and highest in September. The exchangeable $Ca^{2+}$, $Mg^{2+}$ and $K^+$ in the soil were relatively constant during the study period, but the soil exchangeable $Na^+$ content was variable. Carex scabrifolia and Phragmites communis had constant leaf water content and very high concentrations of soluble carbohydrates during the study period. However, Suaeda malacosperma and S. japonica had high leaf water content and constant very low soluble carbohydrate concentrations. Carex scabrifolia accumulated similar amounts of $Na^+$ and $K^+$ ions in its leaves. Phragmites communis contained a high concentration of $K^+$ ions. Suada japonica and S. malacosperma had more $Na^+$ and $Cl^-$ ions than $K^+$ ions in their leaves. Suaeda japonica had higher levels of glycine betaine in its leaves under saline conditions than C. scabrifolia and P. communis. Consequently, the physiological characteristics of salt marsh chenopodiaceous plants (S. japonica and S. malacosperma) were the high storage capacity for inorganic ions (especially alkali cations and chloride) and accumulation of glycine betaine, but monocotyledonous plant species (C. scabrifolia and P. communis) showed high $K^+$concentrations, efficient regulation of ionic uptake, and accumulation of soluble carbohydrates. These characteristics might enable salt marsh plants to grow in saline habitats.

Separation and Composition of Sesame Meal Protein (참깨박(粕) 단백질(蛋白質)의 분리(分離)와 조성(組成))

  • Kim, Jun-Pyong;Shim, Woo-Man;Kim, Chong-Ik
    • Applied Biological Chemistry
    • /
    • v.23 no.1
    • /
    • pp.14-22
    • /
    • 1980
  • White and black sesame produced in Korea were defatted with ethyl ether or n-hexane. Defatted sesame meal was extracted with water and salt solution, and protein extraction was precipitated at various pH 1 through 12, with trichloro acetic acid (TCA), tannic acid and ammonium sulfate, respectively. Protein was purified by Sephadex A-25, G-75, G-100 and G-200, and identified its protein fraction by polyacrylamide gel electrophoresis. Amino acids composition of protein in white sesame was analyzed by automatic amino acid analyzer. Protein contents of white sesame, black sesame and sesame meal are 20.5%, 19.2%, and 44.7%, respectively. n-Hexane was the most suitable solvent for extraction of oil from sesame. Crude protein precipitation was better in higher pH. The protein extraction was more effective with the solution containing sodium chloride tinder the pH 8. Globulin in total protein was high and prolamin was less than in other cereal proteins. Glutamic acid contents of white sesame and sesame globulin were 17.1%, and 20%, respectively. Both proteins contained relatively high levels of essential amino acids. 12-13 bands were found in water soluble protein and 2 bands in salt soluble protein were detected by the disc gel electrophoresis, and were identified in both of white and black sesame. The salt soluble protein of white sesame could be purified by Sephadee G-100 and G-200.

  • PDF

Effect of a Number of Organic Sources on the Ammonification and Nitrification of Urea and Soil Reaction (요소의 암모니아화 및 질산화와 토양반응에 미친 수종 유기물의 영향)

  • 오왕근;허지희;김재영
    • Asian Journal of Turfgrass Science
    • /
    • v.5 no.1
    • /
    • pp.47-53
    • /
    • 1991
  • A laboratory experiment was conducted in order to learn the effect of a number of organic matters on the ammonification and nitrification of urea, and the reaction of soil, applied to a loamy upland soil poor in orgnic matter(<1.5%, without plants 1.The ammonification of urea was most pronounced in one week period immediatly after fertilizer and water treated, after which a rapid decrease of it was followed showing no accumulation at the end of 3rd week. Owing to the accumlation of ammonium, pHs of treated soils were read 7.0 to 7.3 from 6.8~6.9. 2.Nitrification was also progressed rapidly in the first one week period so that the accumulation of NO$_3$-N surpassed that of ammonia during this period. After the 1st week the accumulation of N0$_3$-N was continuously increased showing the maximum at the end of 4 weeks following a sharp decrease at the end of 5th weeks. The accumulation of NO$_3$-N dropped soil pH from 6.8-7.0 to 6. 0-6.2,but the decrease of NO-N at the end of 5th weeks brought up soil pH to 6.4-6.6. again. 3.Amino acid fermentation byproduct rich in salt, paticularly chloride, slowed down the ammonification and nitrification of urea. 4.The application of organic matter diminished the acidifying effect of chemical fertilizers. The diminishing effect of soluble humic acid and amion acid fermentation byproduct showed greater than that of solid organic matter in this experiment, which might be own to the application of a rather small amount of water soluble organic matters. Rice straw powder among solid organic matters appeared to be the least in the diminishing effect above. It may be reasoned that these soluble organic matters decomposes rapidly so as to affect Soil pH, but solid organic matters, particularly the rice straw powder, form acidic humus.

  • PDF

Effect of Soy Protein Isolate and Calcium Chloride on the Properties of Water Soluble Chitosan Film (분리 대두단백질과 염화칼슘을 첨가하여 제조한 수용성 키토산 필름의 특성)

  • Cho, Ji-Mi;Park, Sang-Kyu;Lee, You-Seok;Rhee, Chong-Ouk
    • Applied Biological Chemistry
    • /
    • v.46 no.2
    • /
    • pp.113-116
    • /
    • 2003
  • Color value, total color difference $({\triangle}E)$, puncture strength (PS), tensile strength (TS), percent elongation(%E) at break values, and water vapor permeability (WVP) were determined for water-soluble chitosan films added with soy protein isolate (SPI) and $CaCl_2$. Mechanical and water vapor barrier properties of the chitosan films were affected by SPI and $CaCl_2$ concentrations. PS value $(174.5-448.8\;g_f)$ of the chitosan films increased with increasing concentration of $CaCl_2$ TS value of 0.05% $CaCl_2$-added chitosan films significantly increased to 1.58 MPa compared to 0.06 MPa of the control. %E values ranged from 12.25 to 44.80% and increased with increasing concentration of $CaCl_2$. WVP of $CaCl_2$-added films was lower than that of SPI-added films.

Studies on the Digestion of Soybean protein by Aspergillus sojae (미생물(微生物)을 이용(利用)한 대두단백질분해이용연구(大豆蛋白質分解利用硏究))

  • Kim, Z.U.;Cho, M.J.;Kim, S.S.;Lee, C.Y.
    • Applied Biological Chemistry
    • /
    • v.12
    • /
    • pp.19-24
    • /
    • 1969
  • As a one of the new methods for soybean protein food processings, an attempt was made to decompose steamed soybean protein to amino acids, peptides, and other water soluble forms by the use of protease produced by Aspergillus sojae, and extract them to use as additives of low protein foods or weaning-foods of children. In this paper, as a one part of this subject, the optimum condition, such as optimum pH, temperature, digestion period, raw material's mixing ratio with wheat meal, amount of water added, and effect of sodium chloride addition, to decompose and extract soybean protein were studied. They were obtained when mixing raw materials with wheat meal in the ratio of 10:4 and adding six folds of water at $40-45^{\circ}C$, pH 5-8 for 18 hrs. digestion. Although sodium chloride addition exerted an unfavorable influence upon the decomposition of the aforementioned materials, it was effective to prolongation of digestion period. Under the abovementioned optimum conditions, the maximum extractability of soybean protein as forms of amino acids, peptides, and other water soluble forms, was nearly 70 percent against protein content of raw materials.

  • PDF

Preparation of Cefaclor-Containing Gelatin Microcapsules and Their Drug Release Characteristics (수용성 약물인 세파클러를 함유하는 젤라틴 마이크로캅셀의 제조 및 약물 방출특성)

  • Cho, Seong-Wan;Park, Jong-Hwa;Park, Jun-Sang;Jang, Joung-Soo;Choi, Young-Wook
    • YAKHAK HOEJI
    • /
    • v.41 no.1
    • /
    • pp.30-37
    • /
    • 1997
  • In order to formulate a controlled release system for oral drug delivery, the microcapsules were prepared in w/o emulsion containing cefaclor as a water-soluble model drug by th e method of interfacial polycondensation. Gelatin wis selected as a suitable polymer for interfacial polycondensation. Gelatin solution containing drug was emulsified in an organic phase under mechanical stirring. After emulsification, terephthaloyl chloride was added as cross linking agent, followed by mechanical stirring, washing and drying. Physical characteristics of microcapsules were investigated by optical microscopy, scanning electron microscopy and particle size analysis. Mean particle sizes of gelatin microcapsules were, in the range, of about 20~50 ${\mu}$m. The microcapsules were in good apperance with spherical shapes before washing, but were destroyed partially after washing and drying, even though some microcapsules were still maintained in their shapes. Contents of cefaclor in the microcapsules were calculated by UV spectrophotometry after 3 days extraction with pH 4 carbonate buffer solution. The effects of cross linking time. pH. concentration of cross-linking agent, and temperature on drug release kinetics have been discussed extensively.

  • PDF

Synthesis and Evaluation of N-(2,3-dihydroxypropyl)-N,N-dimethyldodecane-1-amine chloride (N-(2,3-dihydroxypropyl)-N,N-dimethyldodecane-1-amine chloride의 합성과 평가)

  • Cho, Wan-Goo;Choi, Jeong-Jin
    • Journal of the Korean Applied Science and Technology
    • /
    • v.25 no.1
    • /
    • pp.23-31
    • /
    • 2008
  • In general, anionic and cationic surfactants are incompatible because their mixtures form insoluble complexes. There are, however, some complexes that are soluble and behave like regular surfactants, specifically like nonionic surfactants, thus named pseudo-nonionic surfactant complexes. Pseudo-nonionic complexes are more effective and efficient than their ionic surfactant components as shown by their equilibrium and dynamic surface tensions and interfacial tensions. They pack at the interface more than their ionic components. Since, pseudo-nonionic complexes show their own characteristics, they can be treated as separate classes of surfactants distinct from ionic and nonionic surfactants. Novel cationic surfactant was synthesized, having the polyhydroxyl group at the head group. We found that aqueous mixtures of our cationic surfactant and usual anionic surfactant(SDS) could form homogeneous solutions even at high concentration. The properties of mixed surfactant solutions were measured. Foam stability, CMC(critical micelle concentration), water hardness tolerance and thickening effect were tested. The foam stability of mixed surfactants was very good and various synergy effects were observed.

Thermosensitive Block Copolymers Consisting of Poly(N-isopropylacrylamide) and Star Shape Oligo(ethylene oxide)

  • Lee, Seung-Cheol;Chang, Ji-Young
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.7
    • /
    • pp.1521-1525
    • /
    • 2009
  • Thermosensitive block copolymers of ethylene oxide and N-isopropylacrylamide (NIPAM) were synthesized. A five armed star shape oligo(ethylene oxide) initiator with a cyclotriphosphazene core was prepared and used for the atom transfer radical polymerization (ATRP) of NIPAM. The lower critical solution temperatures (LCSTs) of the copolymers were 36 to 46 ${^{\circ}C}$, higher than that of PNIPAM (32 ${^{\circ}C}$), depending on their molecular weights. The copolymers were soluble in water below the LCSTs but formed micelles above the LCSTs. The thermosensitive micellization behaviors of the polymers were investigated by fluorescence spectroscopy. With increasing the temperature of an aqueous solution of P2 and pyrene above the LCST, the peak of 333 nm red-shifted to appear around 339 nm and its intensity increased significantly, indicating the micelle formation. The transfer of pyrene into the micelles was also confirmed by a confocal laser scanning microscope. The fluorescence image obtained from P2 in an aqueous pyrene solution exhibited a green emission resulting from the pyrene transferred into the micelles. Salt effects on the solubility of the copolymers in an aqueous solution were investigated. The LCST of P2 decreased sharply as the concentration of sodium chloride increased, while decreased slowly with potassium chloride.

The Chemical Properties and Fertilizer Effect of a Residual By-product of Glutamic Acid Fermentation -I. Chemical properties and effect on the growth of corn (구르타민 산발효잔사가공물(酸醱酵殘渣加工物)의 성질(性質)과 비효 -I. 그 성질(性質)과 옥수수에 대(對)한 비효)

  • Hong, Chong Woon;Jung, Yee Geun;Park, Chon Suh;Kim, Yung Sup
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.6 no.3
    • /
    • pp.159-163
    • /
    • 1973
  • A by-product from glutamic acid fermentation prepared by treating the fermentation residue with sulfuric acid and ammonium hydroxide was studied in the light of its chemical properties by chemical analysis and X-ray diffraction technique. Its effectiveness as fertilizer was also investigated with corn as test plant. The results are summarized as following. 1. The chemical analyses and study with X-ray diffraction technique revealed that the by-product contains an appreciable quantity of water soluble ammonium as ammonium sulfate and ammonium chloride, water soluble amino acid and in-soluble organic carbon. Particularly, the X-diffraction pattern of the material indicated the presence of unidentified water soluble double salt of ammonium sulfate and ammonium chloride. 2. The water soluble ammonium in this material was found to be as effective as urea on the growth of corn plant. 3. The organic portion of the material was found to be equally effective on the growth of corn plant as the other sources of organic matter such as compost and rice bran. It was, however found that the organic matter in the fermentation residue is more persisting in the soil than the compost and rice bran. 4. It was noticed that the application of the fermentation by-product, lowers the soil pH significantly. Inspite of the pH lowering effect, the absorption of iron by corn plant was surpressed by the application of this material.

  • PDF