• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.689-701
• /
• 2013

Bacterial growth and corresponding consumption of carbon and phosphorus were examined in which tap water samples containing a very low concentration of free chlorine were supplemented with organic carbon and/or phosphorus. The experiments were performed in a fed-batch mode under a controlled temperature of $20^{\circ}C$. In the phosphorus alone-added water, there was no significant increase in bacterial numbers measured as heterotrophic plate count (HPC) in the bulk water. However, bacterial growth was stimulated by the addition of carbon (e.g., bulk HPC levels increased to $10^3CFU/mL$) and further stimulated by the combined addition of carbon and phosphorus (e.g., bulk HPC to $10^5CFU/mL$). The same effects were observed in biofilm HPC and biomass formed on polyethylene (PE) slide surfaces. In the water where organic carbon and phosphorus were added together, the highest biofilm HPC and biomass (measured as extracellular polymeric substance components) densities were observed which were $7.6{\times}10^5CFU/cm^2$ and $5.3{\mu}g/cm^2$, respectively. In addition to the bacterial growth, additions of organic carbon and/or phosphorus resulted in different bacterial carbon-to-phosphorus (C/P) consumption ratios. Compared to a typical bacterial C/P consumption ratio of 100:1, a higher C/P ratio (590:1) occurred in the carbon alone-added water, while a lower ratio (40:1) in phosphorus alone-added water. Comparative value (80:1) of C/P ratio was also observed in the water where organic carbon and phosphorus were added together. At the given experimental conditions, bacterial growth was deemed to be more sensitive to microbially available organic carbon than phosphorus. The effect of phosphorus addition, which resulted in a lower C/P consumption ratio, seemed to be tightly associated with the presence of microbially available organic carbon. These results suggested that the control of extrinsic carbon influx seemed to be more important to minimize bacterial regrowth in drinking water system, since even low content of phosphorus naturally occurring in drinking water was enough to allow a bacterial growth.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.36-42
• /
• 2002

Microarrayer is used to make DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the develop-ment results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density micro array. The microarrayer is developed by using a prependicular type robot with three axes. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 12 pens at the same time. To prove the performance of the developed microarrayer, we use the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, we can see that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within $1cm^2$ area.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.899-904
• /
• 2003

Microarrayer makes DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the development results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density microarray. The microarrayer is developed by using a robot of three-axes perpendicular type. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 32 tips at the same time. To prove the performance of the developed microarrayer, the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, it can be shown that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within 1 $cm^2$ area.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.287-295
• /
• 2008

Rock slope has a variety of irregular discontinuities and represents a discontinuous mass. Rock joint plays an important role of control hydraulic and mechanic movements in the rock mass. These characteristics between hydraulic and mechanic movements at the rock joints could be represent difference. Therefore they are quiet important factor for slope design. In this study the weathered rock slopes were carried out to analysis of slope stability and geophysical survey. The electrical resistivity survey with dipole-dipole array conducted five profiling sites, and SWEDGE and SLIDE for slope stability analysis were applied on 20 rock slopes far assessment of slope stability and understand to geological situations due to the weathering.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.101-109
• /
• 1998

Recently, improvement of the quality of urban riverscape environment has been emphasized not only by landscape architectural field but also by various professionals in planning and ecology. Regarding to this current movement, the aim of this paper is to highlight major visual elements of riverscape axis as a case study of Shinchon River in Taegu City to suggest some basic guidelines for arranging riverscape in urban area. The study was mainly based on Repertory Grid Development method which was developed in Japan. The method is consist of three steps such as decision of element landscape in study area for slide photos, selection of evaluation items for interview and obstraction of proper evaluation factors. The major findings through this study are as follows; 1) The 12 major visual elements which possibly improve riverscape, based on abstraction of proper evaluation factors, are Dunchi, surface of the water,, equipment of river, buildings near riverside, river vertical and horizontal facilities like bridge, fine view, riverbed, water plant, naturalness, water's edge line, harmony and street trees by order. 2) Total numbers of adjective which describe 12 common factors are 25, such as clean, open, stable, quiet, comfortable, friendly, bright, natural etc. In addition, Dunchi was described 337 times by various adjectives, surface of the water was 200 times and arrangement of river was 146 times which is similar result with the order of 12 influential common factors. 3) Therefore, Dunchi, surface of the water and equipment of river are three most important factors which could create better riverscape. These three factors implies us how we supply good quality of urban river environment for the urban residents.

• Journal of ILASS-Korea
• /
• v.12 no.4
• /
• pp.198-203
• /
• 2007

In the present work, surface wetting effect on spread-splash regime and transition criterion of the water and ethanol droplets impacting an unheated dry wall has been experimentally investigated. The droplet was directed on a polished STS plate and a glass slide, and the impinging behavior was visualized and recorded using a CCD camera. Droplet diameter and velocity approaching the wall were measured as well. The critical Sommerfeld number representing the spread-splash boundary for the ethanol droplet impinging on the substrates turned out to be smaller compared to that for the water droplet impinging on the substrates with the surface roughness condition remained unchanged. The shift of the transition boundary is considered to be due to the effect of the surface wettability represented by static contact angle and surface tension of droplet.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3805-3810
• /
• 2013

The surface modification of silica particles (SPs) was systemically conducted by the treatment of 0.1-10 wt % phenylsilanetriol (PST) on the basis of SPs used through two step processes: 1) the PST coating of SPs via evaporation under reduced pressure and 2) their thermal condensation leading to Si-O-Si bond formation via heating at $130^{\circ}C$. The evaluation of the modified SPs was conducted by the simple floating test on water and the measurement of the contact angle (CA) of water droplet on the 2-dimensional layer of modified SPs on slide glass. When PST was used about 2 wt % or above on the basis of SPs (about average size: 50 nm) used, the modified SPs were fully floated on the water and all dispersed into upper organic solvent layer after a shaking with the mixture of the water and benzene, indicating that the modified SPs have hydrophobic properties. The modified SPs were characterized by $^{29}Si$ MAS NMR and physicochemical properties including SEM, TEM, BET, adsorption/desorption isotherms, etc. were measured and compared each other in details. This research demonstrates that the organosilanetriol is a good modifier applicable for the surface modification of inorganic oxide particles using a low amount of modifier on the basis of oxide particles used.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.487-494
• /
• 2005

In order to estimated a reason of soil slope failure new measurement technology is demanded to measure a variation of volumetric water content which is a key physical parameter for understanding the slope failure in the field. In this study a laboratory soil tank test were conducted to use RDB and ADR measurement probes for measuring the variation of volumetric water content. These experiments were compared with two physical parameters as volumetric water content and pressure water head which are estimated to the compacted weathered granite soil under the artificial rainfall, 7.5mm/hour, in the whole of two stages. From the results the variation of volumetric water content and pressure water head is represented to nearly similar travel time.

• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.1-5
• /
• 1980

This study was undertaken to investigate the activity or the water extract of Polygonum aviculare Linne in vitro. Some of the purely isolated strains or dermatophytes were inoculated on Sabouraud's dextrose agar medium containing different concentrations of the Polygonum extracts and their growth was observed for about two weeks at room temperature. Then we measured the sizes of fungal colony grown in various conditions and compared them with those of Sabouraud's medium as control to determine fungistatic effectiveness of the extract. For additional study, slide cultures on Sabouraud's dextrose medium and Sabouraud's media containing 3ml/10ml extract were performed with Epidermophyton floccosum to observe the growth of hyphae, sporulation and other mycological findings. 1. The growth of Epidermo-phyton floccosum was completely inhibited in the media containing 3ml/l0ml Polygonum extract. 2. Trichophyton rubrum, Trichophyton mentagrophytes and microsporum canis were completely inhibited in several strains of each specimen and a moderate inhibitory effect was observed in all of another strains in the media containing the 3ml/10ml extract. 3. In the slide culture of Epidormophyton floccosum the hypha was thin and more desiccated. The characteristic macroco-nidia formation was not observed on the media containing 3ml/10ml Polygonum extract as compared with those findings of Sabouraud's dextrose control medium.