• 한국물환경학회지
• /
• 제34권5호
• /
• pp.470-486
• /
• 2018

This study is to investigate the allochthonous load and water quality of a typical river-reservoir, Paldang during spring (March ~ May) of 17 years (2001 ~ 2017). Phosphorus loading from point sources seems to have been reduced by 74 % in the 2010s. As a result, trophic state of the Paldang reservoir, eutrophic during the 2000s, has returned to the lmesotrophic state. Along with decrease in phosphorus concentration, standing crops of algae (Chl.a) decreased, and concentration of biodegradable organic material decreased to the past level. Concentration of total suspended solids has decreased, and it is due to the decrease of phytoplankton standing crops since the mid-2000s. As transparency increased, it is estimated that euphotic area increased by 22 % and euphotic capacity expanded by 27 %. In the river/transition zone of Paldang, concentration of organic matter increases slightly due to algal growth, but concentration of all water quality items decreases in the lacustrine zone. Although algal growth rate revealed positive correlation with concentration of phosphorus, it was insignificant. Algal growth appeared to be dependent on renewal of phosphorus by flow, than either flow rate or phosphorus concentration. The empirical model including inflow phytoplankton concentration fit well with observed values, and indicates the Paldang reservoir is greatly influenced by allochthonous loads.

• 아시안잔디학회지
• /
• 제10권1호
• /
• pp.31-40
• /
• 1996

The mechanical expresion provides for the use of Soil property reserves and permanent protec-tion or improvement of soil resources in accordance with measurable standards. If the functions I (initial soil property), E (soil erosion), R (soil renewal), and M. (minimum allowable value) are assumed to be integrable in region A, erosion tolerance over a region is leaded to ${\int}_A{\int}I(m, cl, re, ch, b)dA-{\int}_A{\int}{\{\int}_{to}^{\infty}[E(w, re, c, re, ch, b, t)-R(m, ch, re, b, t)]dt}\dA{\geqq}{\int}_A{\int}M_i(m, cl, re, ch, b)dA$ were variable factors are m=parent material of soil, cl=climate, re=relief or topography, ch=soil characteristics, r=rain or water, w=wind, b=biota, and t=time.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.192-199
• /
• 2003

Trimethylglycine, commonly named betaine, is the most simple amphoteric molecule. It is completely vegetal (1,2), as it is produced in the sugar industry by industrial chromatography of molasses. While abundantly used in foods and diet supplements, many interesting applications in cosmetics have recently been investigated, like its capability to increase the volume and stability of foams in surfactant solutions. For its special chemical structure (it is the internal salt of a weak acid and a strong alkali) trimethylglycine is a solvent and buffering agent for strong acids and Lewis' acids. It allows to improve the efficiency of $\alpha$- and $\beta$-hydroxy acids in increasing the physiological rate of epidermal cell renewal, while keeping a low skin-irritation level. In oral care cosmetics, it acts as a mucous membrane protectant (3). For its special water co-ordination capability, its solubilising power, polymer swelling capability, after-feel improvement in hair products, skin moisturization and elasticity enhancing properties, trimethylglycine provides unusual characteristics to many products intended for skin maintenance (4).(omitted)

• 상하수도학회지
• /
• 제31권1호
• /
• pp.21-28
• /
• 2017

This study was performed to propose the sewer defect scoring, and grading protocols for sewer condition assessment. For this, sewer defect scoring methods were comparatively analyzed and reviewed for four international condition assessment protocols, which are established based on WRc manual. As a result, we proposed a new protocol for sewer condition assessment, in which characteristics of sewer pipes are considered by segment. In reference to the PIM-3, the extent of ground subsidence was adopted to be of importance, and renewal scores increased in accordance with weighting of defects causing structural backfill materials. Also, defect grades of 'Hole' were extended to 5 levels of the grading, and 'Surface Damage' was excluded in defect assessment. The addition of 'Buckling' resulted in reduction of weights in 'Surface Damage' and 'Lining Defects'.

• 설비공학논문집
• /
• 제17권5호
• /
• pp.452-458
• /
• 2005

In Korea, pumping pipe using gravity way by water is most popular method in drainage system. But, it is difficult to repair a drainpipe in this method because the drain pipe diameter is increased as using this method. In this research, we propose a new drainage system. The system aim for an adaptedness with buildings, freedom of plan, construction and renewal in water pipe equipments, etc. The new system is not need of incline of piping, and it uses drainage power that is changed potential energy by high velocity flow as making Siphonage at vertical pipe. Therefore, the diameter of piping can decreased than existing piping system established in the ceiling. Also because connecting position will be located at the lower part, it is changed the potential energy of drainage to the high velocity flow. In addition, drainage will be smooth because the fixture drain is linked by each drain pipes.

• 농촌계획
• /
• 제30권2호
• /
• pp.69-77
• /
• 2024

As impervious area increases due to urbanization, rainfall on the impervious area does not infiltrate into the ground, and stormwater drains quickly. Low impact development (LID) practices have been suggested as alternatives to infiltrate and store water in soil layers. The practices in South Korea is applied to urban development projects, urban renewal projects, urban regeneration projects, etc., it is required to perform literature research, watershed survey, soil quality, etc. for the LID practices implementation. Prior to the LID implementation at fields, there is a need to simulate its' effect on watershed hydrology, and Storm Water Management Model (SWMM) provides an opportunity to simulate LID practices. The LIDs applied in South Korea are infiltration-based practices, vegetation-based practices, rainwater-harvesting practices, etc. Vegetation-based practices includes bio-retention cell and rain garden, bio-retention cells are mostly employed in the model, adjusting the model parameters to simulate various practices. The bio-retention cell requires inputs regarding surface layer, soil layer, and drain layer, but the inputs for the drain layer are applied without sufficient examination, while the model parameters or inputs are somewhat influential to the practice effects. Thus, the approach to simulate vegetation-based LID practices in SWMM uses was explored and suggested for better LID simulation in South Korea.

• 원예과학기술지
• /
• 제29권1호
• /
• pp.29-35
• /
• 2011

EC 기준의 순환식 수경재배시스템에서 재사용 양액 내의 이온 농도의 변화와 각 이온의 EC 기여 비율의 변화는 안정적인 양액 관리를 위해서 고려되어야 할 중요한 요인이다. 본 연구는 초기 생육단계 파프리카의 EC 기준 순환식 수경재배에서 교체 주기에 따른 재사용 양액 내 이온 농도, 이온균형 및 이온의 EC 기여도의 변화를 조사하여 재사용 양액의 적정 분석 주기를 규명하고자 수행하였다. 실험은 파프리카의 평균 마디수가 13마디일 때 시작하였고, 처리 종료시점에서는 평균 마디수가 18마디였다. 1개의 암면 슬라브당 3주의 파프리카가 재배되었다. 처리는 재사용 양액의 교체 주기에 따라 각각 1주, 2주, 3주, 4주 교체 처리구로 구성되었다. 양액은 일사비례제어방식으로 급액되었다. 배액은 배액 탱크에 수집된 후에 당일 관수가 종료된 후 혼합 탱크에서 EC $2.69dS{\cdot}m^{-1}$가 될 때까지 희석되었다. 혼합된 양액은 익일의 양액으로 사용되었다. 재사용 양액은 주기적으로 수집하여 분석되었다. 교체 주기에 따른 이온 농도의 변화는 처리별 차이가 나타나지 않았다. 모든 처리구에서 이온 농도의 변화 범위는 각각 $K^+$ 5-8, $Ca^{2+}$ 11-14, $Mg^{2+}$ 2.0-2.7, $Na^+$ 0.5-0.6, $NO_3{^-}$ 14-19, ${SO_4}^{2-}$ 4-5, ${PO_4}^{3-}$ 1-4, $Cl^-$ $0.3-0.5meq{\cdot}L^{-1}$와 같았다. 교체 주기에 따른 이온 균형 변화는 크지 않았다. 그러나 전체 처리구에서 이온 비율의 변화는 일정한 경향을 나타냈다. 양이온 비율 변화는 $K^+$ : $Ca^{2+}$을 중심으로 나타났으며, 음이온은 ${SO_4}^{2-}$ : ${PO_4}^{3-}$를 중심으로 나타났다. 양액 중의 $K^+$, $NO_3{^-}$, $H_2PO_4{^-}$의 1가 이온과 $Ca^{2+}$, $Mg^{2+}$, ${SO_4}^{2-}$의 2가 이온의 활동도 계수는 각각 0.8-0.9, 0.5-0.6 사이에서 변하였고, 시간 경과와 함께 각 이온의 활동도 계수는 일정한 경향을 나타냈다. 각 이온이 양액의 EC에 기여한 비율은 $K^+$와 $NO_3{^-}$가 가장 컸고, 다음으로 $Ca^{2+}$, ${SO_4}^{2-}$, $Mg^{2+}$ 순으로 나타났다. 본 실험에 적용한 교체 주기 4주는 초기 생육단계의 파프리카를 EC 기준 순환식으로 수경재배 할 경우, 이온 농도 변화와 이에 따른 EC 기여도의 변화는 안정적인 범위 이내라고 판단된다.

• 한국패션뷰티학회지
• /
• 제4권1호
• /
• pp.51-59
• /
• 2006

Today, SPA fills many of the same needs as they did thousands of years ago, including relaxation, wellness and stress relief by incorporating many of the same methods embraced by the ancients such as a multitude of hydrotherapy treatments, thalassotherapy and massage therapy, one of the most widely used SPA treatments. The definition is as follows: SPA is entities devoted to enhancing overall well-being through a variety of professional services that encourage the renewal of mind, body and spirit. It was from here that the concept of modernday SPA evolved, incorporating full health and beauty services along with sport, aquatic and rest facilities. Todays SPA, a absolute concept, is being specialized and spread as fast as undefinable just in a word. Thalassotherapy, a kind of SPA therapy, contains minerals and trace elements. Born more than 4,000 years ago in ancient Egypt, thalassotherapy comes from the Greek words for thalasso(sea water) and therapeia(to heal). Thalassa was the Greek personification of the Mediterranean Sea that surrounded them and gave them so much of their sustenance. It helps to nourish, hydrate and refine skin texture and also eliminate metabolic waste and toxins in the body. Thalassotherapy is recommended for post-natal and postsurgery recovery period, chronic fatigue, circulatory problems, cellulite control and dermatological problems. It's also possible to enjoy the thalassotherapy SPA as a day guest. Be sure to try the jansu massage, given in the heated sea water pool. As a trained therapist gently whisks clients through the womb-warm water, clients can practically feel the toxins leave their body. Many women from all over the world have been kept up beautiful skin with applying thalassotherapy to their faces and bodies since long times and these days in France, they are getting great curative clinical effects from renovative and scientific technological combination. Thus thalassotherapy will be absolutely ultimate form of natural healing which can keep and recover human's health and beauty.

• 한국환경과학회지
• /
• 제19권7호
• /
• pp.901-905
• /
• 2010

Emissions of leachate, odor, and landfill gas(LFG) from an open-dumping landfill site do harm to public health by contaminating neighboring soil, underground water, and rivers. Particularly, methane($CH_4$) and carbon dioxide($CO_2$), the main components of LFG, are especially noted as the causing material of the global warming that become seriously recognized worldwide issue. As one of alternatives in managing LFG, incineration of inflammable wastes that are generated during excavation process at an open-dumping landfill has been evaluated. Standard on stabilization for evaluation, neither $CH_4$ density nor $CO_2$ density could not Because meet 'less than 5%' criterion and so it is right to install a gas collection system during landfill renewal to prevent diffusion of odor and collect it. Because it shows considerable heating value, incineration of inflammable wastes might be the reasonable solution from the result of our study.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.929-940
• /
• 2013

Environmental fatigue of the metallic components in light water reactors has been the subject of extensive research and regulatory interest in Korea and abroad. Especially, it was one of the key domestic issues for the license renewal of operating reactors and licensing of advanced reactors during the early 2000s. To deal with the environmental fatigue issue domestically, a systematic test program has been initiated and is still underway. The materials tested were SA508 Gr.1a low alloy steels, 316LN stainless steels, cast stainless steels, and an Alloy 690 and 52M weld. Through tests and subsequent analysis, the mechanisms of reduced low cycle fatigue life have been investigated for those alloys. In addition, the effects of temperature, dissolved oxygen level, and dissolved hydrogen level on low cycle fatigue behaviors have been investigated. In this paper, the test results and key analysis results are briefly summarized. Finally, an on-going test program for hot-bending of 347 stainless steel is introduced.