• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.1-6
• /
• 1996

Extracts from bark have been studied with a view to producing water-proof wood adhesives. Lately many softwoods, such as radiata pine from New Zealand and larch from Siberia, Russia, have been imported and utilized, and their residual barks would be expecting as potential raw materials for something useful chemicals. The great effort toward utilization of bark extractives as a chemical feedstock has been made on a worldwide level. However few report has been done for the utilization of tree bark extractives in Korea. Hot-water extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelinii) and Radiata pine(Pinus radiata). The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extractive yields was discussed. Particle sizes affected the hot-water extractives: the finer the particle size, the higher extractives and extract efficiency. Higher temperature and higher liquor ratio were more effective. Extractives from Japanese larch were relatively less than those from Siberian larch and Radiata pine barks. Formaldehyde precipitates was the highest in extractives of Radiata pine barks. It could be concluded that Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.37-46
• /
• 2010

This study was carried out to develop new application field and obtain the basic data of mixed paper with wood pulp and chitosan fiber for producing functional paper. Two types of wood pulp, such as SwBKP and HwBKP, were mixed with chitosan fiber. Physical and optical properties, water vapor absorption, air permeability, antibacterial activity and ash were measured. And the surface morphology of manufactured paper was observed using SEM. The results are as follows. It was revealed that density, breaking length, burst index, tear index, folding endurance and brightness were reduced but water vapor absorption and air permeability were on the rise in the structural view of SwBKP according to increasing the chitosan fiber ratio. Those HwBKP added chitosan fiber were great not only in the strength but also water vapor absorption and air permeability except for brightness. The water vapor absorption was lower and the air permeability was higher in the HwBKP added various chitosan fiber ratios than those with no chitosan fiber. It is estimated that these properties were related with various mixed rate of chitosan fiber. Particularly, air permeability was strongly dependent on the mixed rate of chitosan fiber. The chitosan fiber has superior antibacterial property, comparing with wood fiber. Adding chitosan fiber to the wood pulp was found to have an excellent antibacterial activity, more than 90%. The ashes were determined within 0.5%. Special bonds between chitosan fiber and wood pulp was observed by SEM and it means that the chitosan fiber were combined equally in the interior of wood pulp. In conclusion, mixing wood pulp with chitosan fiber can not only improves the quality of paper but also extend the usage of paper as a functional paper by using inherent property of chitosan. After all, production of functional paper added chitosan fiber is expected for new valuable industry of paper.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.692-702
• /
• 2018

Streptococcus mutans causes oral diseases, including tooth decay, by producing a biofilm called plaque. Therefore, inhibition of biofilm formation is essential for maintaining oral health. Plants produce a variety of secondary metabolites, which act as starting sources for the discovery of new bioactive chemicals that inhibit biofilm formation of S. mutans. Previous studies have reported on chemicals with antibiotic activity for the inhibition of biofilm formation by S. mutans. In this study, nine plant extracts from Melonis Pedicellus, Agastachis Herba, Mori Cortex Radicis, Diospyros kaki leaves, Agrimoniae Herba, Polygoni Multiflori Radix, Lycopi Herba, Elsholtziae Herba, and Schizonepetae Spica were screened for the inhibition of biofilm formation from a plant extract library. The water-soluble compounds of the extracts did not affect cell growth but selectively inhibited biofilm formation. These results suggest that the selected plant extracts constitute novel biofilm formation inhibitors, with a novel biological mechanism, for improving oral hygiene.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.37-41
• /
• 1997

Hot-water soluble extracts were prepared from medium-sized barks of Siberian larch (Larix gmelineii). The extracts were fractionated by ultrafiltration method for producing uniform quality of adhesives. Molecular weight distribution of the extracts was ranged of 100 to 300.000. pH of the extracts affected amounts of flux, and the range of pH 6~pH 8 was proper for wood adhesives, because of easy concentration and fast gelation time. Removal of particles greater than $0.45{\mu}m$ from the extracts increased both filtration speed (flux) and yields of solids in the filtrates. In ultrafiltration process. operating pressure, filtrate temperature, and flow rate significantly increased with the increase of individual condition. Ultrafiltration using PM10 membrane was very effective to fractionate and concentrate the extracts. Removal of large particles greater than 0.45 m from the extracts increased filtration speed(flux) and yields of solids in the filtrates. A gelation time was accelerated with the increasing pH of the extracts and its concentration. The Stiasny precipitate(26%) from the filtrate obtained by PM 10 membrane was very lower than that(78%) of the retentates. This ultrafiltration method was efficient for obtaining high yield purified phenolic compounds.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.528-534
• /
• 2013

This study was carried out to explore a new application of board and obtain fundamental properties for producing composite board from sawdust and orange peels. As the mixing rate of orange peels increased from 10% to 40%, water absorption, thickness swelling, modulus of rupture and brinell hardness decreased as follows : 94.1%~86.5%, 27.2%~18.0%, $65.1kgf/cm^2{\sim}39.2kgf/cm^2$ and $195.3kgf/cm^2{\sim}180.3kgf/cm^2$, respectively. As the density of board increased from $0.4g/cm^3$ to $0.8g/cm^3$, thickness swelling, modulus of rupture and brinell hardness increased as follows: 6.4%~17.9%, $4.2kgf/cm^2{\sim}96.6kgf/cm^2$ and $40.4kgf/cm^2{\sim}196.2kgf/cm^2$, respectively. But the water absorption decreased from 149.2% to 58.6%.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.1-46
• /
• 2008

The ability to control filler performance and fines retention is vital in the development of both filled and non filled grades, respectively. This is very important when achieving the desired sheet structure necessary to maximize machine performance and end user demands. A narrow balance exists in attaining the desired retention and formation particularly in systems with heavier ash loads and producing paper and paper board on higher speed high shear equipment. A new generation of both cationic and anionic micropolymer technologies has been developed. These water based chemistries are volatile organic compound (VOC) and alkyphenol ethoxylate (APE) free. When these novel micropolymers are applied with linear poly-acrylamide or in conjunction with inorganic microparticle technologies (such as silica or swellable minerals), substantial increases in drainage, fibre retention and ash retention are observed. These improvements have been observed not only in high filled wood and non wood containing grades such as fine paper and super calendared sheets (SCA), but also in low filled newsprint grades. Of particular note is the drainage improvement seen with the application of the cationic micropolymers in unbleached packaging grades with poly-acrylamide.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.35-42
• /
• 2006

This study was carried out to develop a new application field of traditional Hanji and obtain the basic data for producing functional Hanji using sawdust ceramics and rice-husk ceramics as an architectural material. The results measuring water vapor permeance and water vapor absorption for using window materials and wallpapers are as follows. Hanji wallpaper has good things in controlling indoor space comfortably. Particularly, ability of controlling humidity of Hanji wallpaper affects indoor space comfort and human health. In the case indoor humidity is higher than outdoor humidity, according to the addition of ceramics, Hanji wallpapers maintain the humidity by retaining water vapor molecules in the pores of ceramics. Thus the Hanji wallpapers with ceramics, in particular rice-husk ceramics, make it superior to non-ceramics Hanji wallpapers in maintaining the humidity indoors.

• Journal of the Daesoon Academy of Sciences
• /
• v.43
• /
• pp.139-177
• /
• 2022

The only text that aids in the understanding of Songs of the Dao of Great Gods (大化神道歌詞), which was established by Yun Jin in 1984, is Mok-wun daegyeong (木運大經, The Great Scripture of Wood-Destiny) published by Oh Yeol-gyun in 1976. This scripture includes five songs: Wun-hoe dongbang-ga (運回東方歌, Songs of Destiny-Returning to the East), Gung-eul-ga (弓乙歌, Songs of Gung-eul), Dodeok-sa (道德詞, Morality Poems), Palguae-gugung byeon-yeok-ga (八卦九宮變易歌, Songs on the Changes of the Eight Trigrams and Nine Palaces), and Nakdang-ga (樂堂歌, Songs of the Paradisiacal Lands). Songs of the Dao of Great Gods, which is prone to embracing Daoist characteristics, is meant to be sung upon the realization of the Later World, the ideal earth. This is expressed as spring. In addition, we can easily find key terms such as Sampung-ga (三豊歌), Yangbaek-segye (兩白世界), Gung-eul-ga (弓乙歌), Gunggung-euleul (弓弓乙乙), Yanggung (兩弓), Euleul (乙乙), Gung-eul seonin (弓乙仙人), Samin-ilseok (三人一夕), Yijae-jeonjeon (利在田田), Gung-eul jiri (弓乙之理), Naenggeum-bugeum (冷金浮金), Seokjeong-gon (石井昆), Yangbaek (兩白), Sampung (三豊), and Sodumujok (小頭無足), all of which appear frequently in traditional prophecies and the faiths they have inspired. The precise meaning of these terms has yet to be revealed. Furthermore, Songs of the Dao of Great Gods contains lyrics prophesying that the return of the wood-destiny of the East and emphasizing the destiny of 3-8 wood as based on the Yellow River Chart (河圖). Songs of the Dao of Great Gods, originated the term, the World of Paradisiacal Lands (樂堂世界), and prophesyed that the wood-destiny of the East would return to create a new world that took Korea as its center. The text emphasized wood-destiny, symbolized by spring, and argued that the Dao of Great Gods could be ascetained from the principle of water-producing wood (水生木) found in the Eastern study of changes (易學) as approached by Choi Su-Wun (水雲), the founder of Donghak (東學).

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.13-22
• /
• 2007

This study was carried out to scrutinize possibility of manufacturing pitch pine (Pinus rigida) glued laminated timber in order to add values of pitch pine trees. Also, it was investigated to improve bending performance of pitch pine glulam. Pitch pine was imported as one of major plantation species in Korean peninsula. Machine stress rated grades of pitch pine lumber mostly ranged between E7 and E9. which grades were more or less inferior to producing high quality glulam. However, the adhesive properties between pitch pine and pitch pine, and between pitch pine and Japanese larch (Larix kaempferi Carr.), such as shear bond strength, wood failure rate and de-lamination rate of bonded layer submerged in cold and boiling water, were higher than Korean Standard criteria. These properties are essential for manufacturing glulam with single species or multiple species. The modulus of rupture (MOR) of pitch pine glulam exceeded the criterion of Korean Standard for glulam strength grade but modulus of elasticity (MOE) was lower than the criterion. On the other hand, the bending performances (MOR and MOE) were improved 20 percent by mixing with Japanese larch laminar. It is effective to arrange higher quality Japanese larch laminar at the outer layer of glulam for improving bending performances. In conclusion, it is possible to use low quality pitch pine as laminar of structural glulam for adding values of pitch pine.