• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• 상하수도학회지
• /
• 제38권2호
• /
• pp.95-107
• /
• 2024

This study proposes the use of a cobalt-based Prussian blue analogue (Co-PBA; potassium cobalt hexacyanoferrate), as an adsorbent for the cost-effective recovery of aqueous ammonium ions. The characterization of Co-PBA involved various techniques, including Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, nitrogen adsorption-desorption analysis, and zeta potential. The prepared Co-PBA reached an adsorption equilibrium for ammonium ions within approximately 480 min, which involved both surface adsorption and subsequent diffusion into the interior. The isotherm experiment revealed a maximum adsorption capacity of 37.29 mg/g, with the Langmuir model indicating a predominance of chemical monolayer adsorption. Furthermore, the material consistently demonstrated adsorption efficiency across a range of pH conditions. Notably, adsorption was observed even when competing cations were present. Co-PBA emerges as a readily synthesized adsorbent, underscoring its efficacy in ammonium removal and selectivity toward ammonium.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• 한국식품과학회지
• /
• 제18권3호
• /
• pp.234-240
• /
• 1986

탈지대두를 파파인 및 ${\alpha}$-아밀라아제를 사용하여 분해시켜 얻은 탈지대두분해물의 흡습특성을 조사하였고 이를 이용하여 모형 중간수분식품을 제조하였다. 탈지 대두분해물의 등온흡혼곡선(等溫吸混曲線)은 단백질 및 전분질이 많이 분해될 수록 동일한 수분함량에서 수분활성도가 저하되었으며 BET 일분자층값(BET monolayer value)은 증가 하였다. 단백질분해정도가 약 78%인 탈지대두분해물의 보수력은 슈크로오스보다 높았으며 소르비틀에 조금 뒤 떨어졌다. 탈지대두분해물의 등온흡습곡선에 가장 적합한 식은 Oswin식이었고 단백질 분해가 많이 진행된 경우에는 Halsey식이 가장 적합하였다. 쌀가루와 탈지대두분해물로 제조한 모형(模型) 중간수분식품(中間水分食品)은 Grover식과 Lang 및 Steinberg식으로 수분활성도를 예측할 수 있었다. 탈지대두분해물을 첨가하여 제조한 식빵에서는 저장성이 향상(向上)됨을 관찰하였다.

• 한국수산과학회지
• /
• 제6권1_2호
• /
• pp.27-36
• /
• 1973

The effect of water activity on degradation of pigments in dried lavers, Porphyra tenera Kjellm. was examined when stored at room temperature for fifty days. Chlorophyll pigment was extracted with methanol-petroleum ether mixture solvent(2:1 v/v), partitioned in ether, and analysed spectrophotometrically at 662 nm as chlorophyll a. The degradation products of chlorophyll were isolated on sugar-starch column(85:15 w/w) with n-propanol-petroleum ether solution(1:200 v/v) as a developing solvent. The isolated green colored zones were analysed individually at the wavelengths of 650, 662, and 667 nm as allomerized product, chlorophyll a retained, and pheophytin formed respectively. Carotenoida were also extracted with the methanol mixture solvent, partitioned in ether, and finally redissolved in acetone after the evaporation of ether in a rotary vacuum evaporator. The total carotenoid content was measured as lutein at 450 nm. From the results, it is noted that the rate of chlorophyll degradation reached a minimum at 0.11 to 0.33 water activity while progressively increased at higher moisture levels resulting in rapid conversion of chlorophyll to pheophytin. At lower activity, autocatalysed oxidizing reaction like allomerization seemed prevailing the acid catalysed conversion reaction. The loss of carotenoid pigment was also greatly reduced at the range of 0.22 to 0.34 water activity with much faster oxidative degradation at both higher and extremely lower moisture levels. These two moisture levels indicated above at which the both pigments exhibited maximum stability are considerably higher than the BET monolayer moisture which appeared 7.91 percent on dry basis at Aw=0.10 calculated from the adsorption isothermal data of the sample at $20^{\circ}C$. The rate of pigment loss in heat treated samples at 60 and $100^{\circ}C$ for 2 hours prior to storage somewhat decreased, particularly at higher moisture levels although the final pigment retention was not much stabilized.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.190-196
• /
• 2023

Anti-adhesion coatings are very important in the processing of adhesive materials such as optical clear adhesive (OCA) films. Choosing the appropriate release coating material for dies and tools can be quite challenging. Hydrophobic surface treatment is usually performed, and its performance is often estimated by the static water contact angle (CA). However, the relationship between the release performance and the CA is not well understood. In this study, the water CAs of surfaces coated with anti-adhesion materials and the peel strengths of the acrylic-based adhesive films are evaluated. STC5 and SUS304 are selected as the base materials. Base materials with different surface roughnesses are produced by hairline finishing, mirror-polishing, and end milling. Four fluoropolymer compounds, including a self-assembled monolayer, are selected to make the base surface hydrophobic. Static, advancing, and receding CAs are mostly increased due to the coating, but the CA hysteresis is found to increase or decrease depending on the coating material. The peel strengths all decreased after coating and are largely dependent on the coating material, with significantly lower values observed for fluorosilane and perfluoropolyether silane coatings. The peel strength is observed to correlate better with the static CA and advancing CA than with the receding CA or hysteresis. However, it is not possible to accurately predict the anti-adhesion performance based on water CA alone, as the peel strengths are not fully proportional to the CAs.

• 한국식품과학회지
• /
• 제15권1호
• /
• pp.27-31
• /
• 1983

백삼(白蔘)을 상대습도별(相對濕度別)로 장기보존(長期保存)하면서 경시적(經時的)으로 지질산패도(脂質酸敗度), 지용성(脂溶性) 및 수용성색소(水溶性色素)의 변화(變化)를 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 단분자층(單分子層) 수분함량(水分含量)은 백삼(白蔘)이 6.68g/100g, 백삼분말(白蔘粉末)이 7.81g/100g이었으며 그때의 수분활성도(水分活性度)는 각각(各各) 0.16, 0.18이었다. TBA가(價)는 저장기간(貯藏期間)이 경과할수록 증가(增加)하였으며 상대습도(相對濕度) 96%인 경우에 가장 컸으며 23%, 32%인 경우에 가장 낮았다. 지용성(脂溶性) 및 수용성색소(水溶性色素)의 변화(變化)도 상대습도(相對濕度)가 높을수록 저장기간(貯藏期間)이 경과하면서 급격한 증가(增加)를 보였다. 이상(以上)의 결과(結果)로 백삼(白蔘)을 장기간(長期間) 보존(保存)할 경우 단분자층(單分子層) 수분활성도(水分活性度)보다 다소 높은 $0.23{\sim}0.32$에서 저장(貯藏)하는 것이 품질정정화(品質定定化)를 위한 최적조건(最適條件)이라 보이며 적어도 Aw=0.57 이하(以下)의 조건(條件)을 유지(維持)시켜야 된다고 생각된다.

• 한국식품영양과학회지
• /
• 제33권10호
• /
• pp.1720-1725
• /
• 2004

분말녹차의 저장안정성을 알아보고자 200 mesh이상,200∼140 mesh, 100∼140 mesh로 입자크기에 따라 분급하여 흡습특성을 조사하고 수분활성도 예측 모델식을 수립하였다. 단분자층 수분함량은 BET식보다 GAB식이 더 높은 유의성을 보여 전구간에서 0.99∼1.00으로 높은 적합도를 보였으며 그 함량은 0.024∼0.0529 $H_2O$/g dry solid로 계산되었다. 평형수분함량은 입자크기에 작을수록, 낮은 온도에서 높은 평형수분함량을 나타내었다. 입자크기에 따른 흡습엔탈피도 큰 차이가 없었으나 수분활성도가 증가함에 따라 낮은 흡습에너지를 보였다. 등온흡습곡선의 적합도는 Halsey 모델이 $R^2$가 0.95 이상으로 높은 적합도를 나타내었고 Oswin, Khun, Caurie모델의 순으로 높은 적합도를 나타내었으며, 편차도 Halsey모델이 2.1∼4.0%로 가장 낮게 나타나 분말 녹차의 흡습특성에 적용가능함을 보였다. 수분활성도 예측모델의 수립을 위해 각 독립변수의 최적 함수로 시간은 ln 함수, 상대습도와 온도는 일차식을 선정하였으며 수분활성도 예측모델식은 입자의 크기에 관계없이 상대습도와 시간으로 수립한 모델식의 적합도가 적절한 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2547-2552
• /
• 2010

CdS nano-particulate films were prepared at the air/water interface under Langmuir monolayers of arachidic acid (AA) via interfacial reaction between $Cd^{2+}$ ions in the subphase and $H_2S$ molecules in the gaseous phase. The films were made up of fine CdS nanoparticles with hexagonal Wurtzite crystal structure after reaction. It was revealed that the formation of CdS nano-particulate films depends largely on the experimental conditions. When the films were ripened at room temperature or an increased temperature ($60^{\circ}C$) for one day, numerous holes were appeared due to the dissolution of smaller nanoparticles and the growth of bigger nanoparticles with an improved crystallinity. When the films were ripened further, CdS rodlike nanoparticles with cubic zinc blende crystal structure appeared due to the re-nucleation and growth of CdS nanoparticles at the stacking faults and defect structures of the hexagonal CdS grains. These structures were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and X-ray diffraction (XRD). These results declare that CdS semiconductor nanoparticles formed at the air/water interface change their morphologies and crystal structures during the ripening process due to dissolution and recrystallization of the particles.

• 한국식품과학회지
• /
• 제35권2호
• /
• pp.211-216
• /
• 2003

열풍, 진공 및 동결건조한 생강분말의 흡습특성을 조사하고 저장 중 수분함량 예측모델식을 수립하였다. 단분자층 수분함량은 BET식보다 GAB식이 더 높은 유의성을 보였으며 등온흡습곡선은 sigmoid 형태로서 건조방법에 따른 차이는 없었으나 낮은 온도에서 평형수분함량이 높았다. 건조방법에 따른 흡습엔탈피는 큰 차이가 없었으나 수분활성도가 증가함에 따라 낮은 흡습에너지를 보였다. 등온흡습곡선의 적합도는 Caurie 모델이 $R^2\;0.99$ 이상으로 높은 적합도를 나타내었고 그 외 Henderson, Bradley 모델의 순으로 높은 적합도를 나타내었으며, 편차도 Caurie 모델이 $1.2{\sim}5.4%$로 가장 낮았다. 수분함량 예측을 위해 각 독립변수의 최적함수로 시간은 ln 함수, 수분활성도와 온도는 일차식을 선정하였으며 수분함량 예측모델식은 건조방법에 관계없이 시간과 수분활성도, 온도로 수립한 모델식의 적합도가 높았다.