• 한국의류학회지
• /
• 제22권1호
• /
• pp.100-107
• /
• 1998

Polyester filaments were dyed with disperse dye in dyebath containing water and water miscible organic solvents . acetone, 1,4-dioxane, DMF. In case of Acetone and 1,4-dioxane, the equilibrium dyeuptake was maximun at the volume fraction 0.05. The equilibrium dye uptakes were decreased as volun~e fraction of organic solvents were increased. When the volume fractions of water miscible organic solvents were varied, dye uptake was increased constantly with dyeing time. In dyebath containing water and water miscible organicsolvent, the dyeuptake was increased quickly during initial 40∼ 60 min. and slowly increased there after. The slope of Ct/Coo to t was greater in dyebath containing water and water miscible organic solvents than dyebath containing water. The differences of the slope with volulne fractions of water miscible organic solvent were not shown big.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권2호
• /
• pp.140-145
• /
• 2006

The behaviour of alginate immobilized and soluble watermelon (Citrullus vulgaris) urease in water miscible organic solvents like, acetonitrile, dimethylformamide (DMF), ethanol, methanol, and propanol is described. The organic solvents exhibited a concentration dependent inhibitory effect on both the immobilized and the soluble urease in the presence of urea. Pretreatment of soluble enzyme preparations with organic solvents in the absence of substrate for 10 min at $30^{\circ}C$ led to rapid loss in the activity, while similar pretreatment of immobilized urease with 50% (v/v) of ethanol, propanol, and acetonitrile was ineffective. Time-dependent inactivation of immobilized urease, both in the presence and in the absence of urea, revealed stability for longer duration of time even at very high concentration of organic solvents. The soluble enzyme, on the other hand, was rapidly inactivated even at fairly lower concentrations. The results suggest that the immobilization of watermelon urease in calcium alginate make it suitable for its application in organic media. The observations are discussed.

• Korean Chemical Engineering Research
• /
• 제44권1호
• /
• pp.92-96
• /
• 2006

유기용매에서 효소를 이용하면 다양한 선택적 반응을 쉽게 수행할 수 있어 산업적 적용 가능성이 매우 높지만, 효소의 안정성 저하는 아직까지 큰 문제 중의 하나로 남아있다. 유기용매에서 효소 반응시 효소의 실활 원인과 효소의 안정화 방법 연구를 위하여 단백질의 folding에 관여하는 molecular chaperone의 일종인 heat-shock protein Hsp90을 이용하여, 대표적인 유기용매 반응시스템에서의 과산화효소 HRP 안정성 향상 연구를 수행하였다. 그 결과 Hsp90은 30％ DMSO, 30％ 및 50％ dioxane 완충용액에서 HRP의 실활 방지 효과를 보였고, 실활된 효소의 재생에도 탁월한 효과를 보였다. 그리고 형광분석과 CD(circular dichroism)에 의한 구조분석을 수행하여 Hsp90이 유기용매에 의해 unfolding되어 있는 효소를 다시 refolding하는 데 기여함을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.197-200
• /
• 2009

A simple dye having phenol and indole moieties was synthesized and its chromogenic signaling behaviors for the determination of water content in organic solvents were investigated. The compound revealed a pronounced chromogenic behavior in response to the variation of water content in water miscible aprotic organic solvents of acetone, acetonitrile, THF, and dioxane. Significant red shifts and changes in absorption spectra allowed a ratiometric analysis of the signaling behavior. The chemosensing behaviors were particularly pronounced in water content in less than 10% that is suitable for the application of the compound as a probe for the determination of water content in binary aqueous organic solutions having lower water content.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2261-2266
• /
• 2013

This paper describes the synthesis and water sensing properties of a fluorescent photoinduced electron transfer (PET) sensor (5) with an extended operating sensing range. The 1,8-naphthalimide derivative (5) attached with a piperazine group and a carboxylic group was synthesized and applied as a fluorescent water sensor in water-miscible organic solvents. The fluorescence intensity of the dye 5 increased with increasing water content up to 80% (v/v) and the fluorescence intensities were enhanced 45-, 67- and 122-fold in aqueous EtOH, DMF and DMSO solutions, respectively. In aqueous acetone solution, the enhancement of the fluorescence intensities was somewhat lower (30-fold) but the response range was wider (0-90%, v/v).

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1999년도 추계학술발표회
• /
• pp.3-6
• /
• 1999

Several chemical washing procedures were applied to Parathion and Diazinon contaminated soil. Batch and column tests were performed to determine the insecticides extraction efficiency as a function of pH. Washing efficiency of methanol is more higher than that of water and HCl when washed parathion and diazinon are. Those are completely miscible with most organic solvents. For parathion, release trend is increased as pH is increased because it is hydrolyzed easily at the condition of alkali. But diazinon shows reverse because diazinon is decomposed rapidly at the condition of acidic So, diazinon is more released than parathion is because this experiment is peformed in acidic and weak acidic conditions. Generally, parathion and diazinon are classified as having low mobility, so they can be easily controlled if the proper washing process are applied.

• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.207-212
• /
• 2019

Non-aqueous solvents (NASs) are generally known to be barely miscible, and reactive with polar compounds, such as water. However, water can interact with some NASs, which can be used as a new means for water recovery from saline water. This study explored the fate of water and salt in NAS, when saline water is mixed with NAS. Three amine solvents were selected as NAS. They had the same molecular formula, but were differentiated by their molecular structures, as follows: 1) NAS 'A' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain, 2) NAS 'B' with symmetrical structure and having the hydrophilic group (NH) at the middle of the straight carbon chain, 3) NAS 'C' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain but possessing a hydrophobic ethyl branch in the middle of the structure. In batch experiments, 0.5 M NaCl water was blended with NASs, and then water and salt content in the NAS were individually measured. Water absorption efficiencies by NAS 'B' and 'C' were 3.8 and 10.7%, respectively. However, salt rejection efficiency was 98.9% and 58.2%, respectively. NAS 'A' exhibited a higher water absorption efficiency of 35.6%, despite a worse salt rejection efficiency of 24.7%. Molecular dynamic (MD) simulation showed the different interactions of water and salts with each NAS. NAS 'A' formed lattice structured clusters, with the hydrophilic group located outside, and captured a large numbers of water molecules, together with salt ions, inside the cluster pockets. NAS 'B' formed a planar-shaped cluster, where only some water molecules, but no salt ions, migrated to the NAS cluster. NAS 'C', with an ethyl group branch, formed a cluster shaped similarly to that of 'B'; however, the boundary surface of the cluster looked higher than that of 'C', due to the branch structure in solvent. The MD simulation was helpful for understanding the experimental results for water absorption and salt rejection, by demonstrating the various interactions between water molecules and the salts, with the different NAS types.

• Advances in nano research
• /
• 제13권2호
• /
• pp.187-197
• /
• 2022

The synthesis of organic and hybrid organic-inorganic perovskites directly from solution improves the cost- and energy-efficiency of processing. To date, numerous research efforts have been devoted to investigating the influence of the various solvent parameters for the synthesis of lead halide perovskites, focused on the effects of different single solvents on the efficiency of the resulting perovskites. In this work, we investigated the effect of solvent blends for the first time on the structure and phase of perovskites produced via the Lewis base vapor diffusion method to develop a new synthetic approach for water-stable CsPbBr₃ particles with nanometer-sized dimensions. Solvent blends prepared with DMF and water-miscible solvents with different Gutmann's donor numbers (D_N) affect the Pb ions differently, resulting in a variety of lead bromide species with various colors. The use of a DMF/isopropanol solvent mixture was found to induce the formation of the Ruddlesden-Popper perovskite based on lead bromide. This perovskite undergoes a blue color shift in the solvated state owing to the separation of nanoplatelets. In contrast, the replacement of isopropanol with DMSO, which has a high DN, induces the formation of spherical CsPbBr₃ perovskite nanoparticles that exhibit green emission. Finally, the integration of acetone in the solvent system leads to the formation of lead bromide complexes with a yellow-orange color and the perovskite CsPbBr₃.

• 분석과학
• /
• 제8권4호
• /
• pp.511-517
• /
• 1995

A cationic water soluble porphyrin (5,10,15,20-tetrakis (l-methyl-pyridinium-4-yl)porphyrin, $H_2tmpyp^{4+}$) and its metalloporphyrins (MP) were easily extracted into acetonitrile separated by addition of sodium chloride ($4mol\;dm^{-3}$) in the presence of sodium perchlorate, where M denotes $Zn^{2+}$, $Cu^{2+}$, $Co^{3+}$, $Fe^{3+}$, and $Mn^{3+}$ and $P^{2-}$ is porphyrinate ion. The extracted ion-pair complexes were completely dissociated to $[MP(ClO_4)_3]^+$, and $[MP(ClO_4)_2]^{2+}$. The extraction and the dissociation constants were determined by taking into account of the partition constant of sodium perchlorate ($K_D=1.82{\pm}0.01$). The chemical properties of the separated acetonitrile phase as $E_{T(30)}$ and $D_{II,I}$ were determined and compared with other water miscible solvents (acetone, actonitrile, 1,4-dioxane, tetrahydrofuran, 1-propanol and 2-propanol). Furthermore, a sensitive and selective method was proposed for the determination of a subnanogram amount of copper(II) in natural water samples by using the present salting-out method and the porphyrins.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.29-40
• /
• 2000

Highly purified Cerrena unicolor laccase (benzenediol:oxygen oxidoreductase, EC 1.10.3.2) caused the demethoxylation of milled wood lignin and several lignin related substances. The constitutive form of the enzyme produced extracellularly by C. unicolor fermenter culture was isolated and purified by ion-exchange chromatography on the DEAE-Toyopearl column and by affinity chromatography on a ConA-Sepharose and Syringyl-AH-Sepharose 4B columns. The enzyme was further immobilized on functionalized porous glass (CPG) and keratin coated CPG. The demethylating activity was monitored both by estimation of released methanol and by detection of the level of methoxyl groups (also in some water miscible solvents) after incubation of lignin materials with laccase preparations (free and immobilized). The effects of the incubation time and temperature on the demethoxylating activity of immobilized laccase preparations were also studied.