• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.19-25
• /
• 2004

A numerical study is performed to investigate the effect of sun tracking on the thermal performance of the evacuated compound parabolic concentrator (CPC) collectors. The evacuated CPC collectors consist of a two-layered glass tube, a copper tube and a reflector. The collector has a copper tube as an absorber and a reflector inside a glass tube. The water is used as a working fluid. The length and the diameter of the glass tube are 1,700mm and 70mm, respectively. The length and the diameter of the copper tube are 1,700mm and 25.4mm, respectively. Ray tracing analysis is carried out in order to compare absorbed heat fluxes on the absorber surface of the stationary and tracking collectors. The collected energy is calculated and compared with that on a fixed surface tilted at $35^{\circ}$ on the ground and facing south. The results indicate that the collected solar energy of the sun tracking system is significantly larger than that of a stationary collector. The sun tracking evacuated CPC collectors show a better performance with an increase in the thermal efficiency of up to 14% compared with an identical stationary collector.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.41-46
• /
• 2014

The thermal-flow characteristics of screw compressor were numerically investigated with various geometrical configurations of its coolant flow passage applied to the separate block for enhancing the heat transfer performance of it. The length ratio($L_s/D$=4.8, 5.6, 6.4) and thickness ratio(t/D=0.2, 0.4, 0.6) of the separate block in the flow passage of the water jacket were adopted to design parameters. Results showed that the pressure drop and heat transfer were increased as the length of separate block increases due to the flow separation and centrifugal force. The results were graphically depicted with various flow and geometrical conditions.

• Biomedical Science Letters
• /
• v.24 no.3
• /
• pp.168-174
• /
• 2018

Ulcerative colitis (UC) is a chronic inflammatory bowel disease characterized by abdominal pain, rectal bleeding and diarrhea. Gastrodia elata Blume (GE) has been used for the treatment of various diseases including neurodegenerative diseases and inflammatory disease. However, there has been no information on whether GE regulates intestinal inflammation. The aim of this study is to elucidate whether GE can protect against dextran sulfate sodium (DSS)-induced colitis in a mouse model. The colitis mice were induced by drinking water containing 5% DSS for 7 days. Body weight, colon length and clinical score were assessed to determine the effects on colitis. The levels of inflammatory cytokines, tumor necrosis factor $(TNF)-{\alpha}$ and interleukin (IL)-6 in colitis tissue were also measured. The results showed that mice administrated with DSS showed clinical signs including weight loss and reduced colon length. GE inhibited the DSS-induced loss of body weight and shortening of colon and increased Disease activity index score. Additionally, we observed that GE suppressed the levels of $TNF-{\alpha}$ and IL-6 in DSS-treated colon tissues. Collectively, these findings provide experimental evidence that GE might be a useful therapeutic agent for patients with UC.

• Solar Energy
• /
• v.17 no.4
• /
• pp.45-56
• /
• 1997

The purpose of this research was to study the characteristics of heat transfer of snow removing facilities using heat pipe by experimental method. Heat pipes was constructed a flexible tube connected between evaporator and condenser ends for altitude adjustment of evaporator and it was constituted an internal diameter of 25.4mm, a length of 950mm for heating section and a length of 6000mm for condenser section with copper material for closed system. The results showed that the effect of heat transfer was increased when inclination angle and inlet temperature of heating water increased. Wall temperature response by inclined angle $4.5^{\circ}c-9^{\circ}c$ and working fluid amount 0.96 from to 1.3 times of evaporator volume were better than those of other working fluid and angle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.366-372
• /
• 2001

The ice plugging process consists of placing liquid nitrogen around a pipe and removing heat until the water in the pipe freezes and provides a solid plug or seal against fluid movement. This technique enables us to repair or inspect a pipe system without shutdown of entire system. A set of test apparatus for investigation of the liquid freezing phenomena during ice plugging is prepared. This study shows the characteristics of the liquid freezing and the heat transfer with various pipe and freezing jacket conditions. And in case there is flow of the fluid inside the pipe, the flow rate which can be able to form the ice plug is identified with the effect of the pipe diameter and freezing jacket length on the plug formation. The permissible maximum flow rate for the complete plug formation is approximately proportional to the freezing jacket length at the same pipe diameter condition.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.169-173
• /
• 2011

The performance of grass filter strips (GFS) in abating $PO_4$-P concentrations from the forage cropland was tested in an experiment on the 10% slope in Grassland and Forages Division, National Institute of Animal Science, Rural Development Administration (RDA) from October 2007 to September 2009. Forage croplands with rye-corn double cropping system applied with chemical fertilizer and livestock manure (LM) were compared in a natural condition. The plots were hydrologically isolated Main plots consisted of the length of GFS, such as 0m, 5m, 10m and 15m. Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). Concentrations of PO4-P in surface runoff water were reduced as the length of GFS increased. Especially, GFS with 10m and 15m reduced $PO_4$-P concentrations significantly compared to that with 0m and 5m (p<0.05). The results from this study suggest that GFS improved the removal and trapping $PO_4$-P from forage croplands.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1286-1293
• /
• 2018

This study assessed the effects of non-stunning (NS) and head-only electrical stunning (HOES) slaughtering condition on meat quality traits of longissimus lumborum (LL) muscle from Korean black goat (KBG). Ten KBGs (18 months) were assigned into two groups and exposed to either NS or HOES treatments. Blood loss (BL) % was measured after exsanguination, and meat quality traits including muscle pH, meat color measurements (CIE $L^*$, $a^*$, $b^*$, Chroma, and hue angle), water-holding capacity (WHC), Warner-Bratzler shear force (WBSF), and sarcomere length were measured at 24 h postmortem. Results indicated that NS and HOES had no significant difference on BL %, the rate of pH decline, meat color properties, and WHC (p>0.05). It has only a small effect on WBSF and sarcomere length values, but the difference was marginal. These results suggested that meat quality of LL muscle from goat might not be affected by slaughter methods because neither NS nor HOES did result in poor quality of meat.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2011-2017
• /
• 2023

Gas submerged jet is an outstanding thermohydraulic phenomenon in pool scrubbing of fission products during a severe nuclear accident. Experiments were performed on the hydraulic characteristics in the ranges of air mass flux 0.1-1400 kg/m²s and nozzle diameter 10-80 mm. The results showed that the dependence of inlet pressure on the mass flux follows a power law in subsonic jets and a linear law in sonic jets. The effect of nozzle submerged depth was negligible. The isolated bubbling regime, continuous bubbling regime, transition regime, and jetting regime were observed in turn, as the mass flux increased. In the bubbling regime and jetting regime, the air volume fraction distribution was approximately symmetric in space. Themelis model could capture the jet trajectory well. In the transition regime, the air volume fraction distribution loses symmetry due to the bifurcated secondary plume. The Li correlation and Themelis model showed sufficient accuracy for the prediction of jet penetration length.

• Fisheries and Aquatic Sciences
• /
• v.26 no.7
• /
• pp.447-454
• /
• 2023

Fast somatic growth is important considerations for successful and competitive aquaculture industry. In rainbow trout reared in South Korea, triploid induction was used to suppress negative influence of reproductive maturation to body growth. However, the effects of triploidy are visible in both mature fish and developing juvenile fish. Thus, it is also important to explicate the effect of triploid induction on growth during the early-life stages of rainbow trout-alevins and fry. Rainbow trout fertilized eggs were subjected to triploid induction and polyploidy was checked by flow cytometry. Diploid and triploid alevins and fry were reared separately in tanks with constant flow of freshwater through flow-through water system and growth measurements were done from zero days after hatching (DAH 0) until DAH 134. The egg-yolk morphometrics of alevins-yolk length, yolk height, yolk volume and yolk weight-were statistically similar (p > 0.05) in both genotypes from DAH 0 to DAH 22. The total length, body height, and body weight of alevins and fry were statistically better (p > 0.05) in both genotypes until DAH 92 but thereafter, triploid had a significantly better growth performance (p < 0.05) over diploid fish until the completion of study at DAH 134. With that, triploid induction did not influence alevin yolk regions and body growth and fry somatic growth until around 3 months after hatching, but considerable growth enhancement was subsequently apparent.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.83-87
• /
• 1998

To reduce the supersonic jet noise from the liquid rocket engine, water injetion silencers were designed and tested. Test variables were the mass flow rate of water jet, the length of primary pipe and the diameter of expansion pipe. Followings are the results of this study. 1. From the same mass flow rate of water, longer primary pipe was more effective to reduce the noise. 2. Noise level was significantly reduced with increasingly water flow rate. 3. The optimum water flow rate was 10～12 times of the propellant flow rate. 4. By installing expansion pipe, noise level was reduced approximately 30㏈ compared to without expansion pipe