• The Korea Journal of Herbology
• /
• v.32 no.3
• /
• pp.79-87
• /
• 2017

Objectives : This study aimed to investigate the protective effects of an herbal mixture of Atractylodes macrocephala and Taraxacum spp. (ATC) on ulcerative colitis. We have previously screened traditional medicinal herbs to discover the effective candidate by the animal model. A. macrocephala and T. spp were identified as one of the effective herbs in the screening process. Methods : Experimental colitis was induced in male Balb/c mice by administering drinking water containing dextran sulfate sodium, which mimics the clinical and histological features of ulcerative colitis in human. ATC at doses of 30, 100 or 300 mg/kg were orally administered to mice twice per day for 10 consecutive days. To evaluate the damage from experimentla ulcerative colitis, body weight, colon length, disease activity index, myeloperoxidase and histological changes were measured and analyzed. Results : The administration of dextran sulfate sodium with drinking water resulted in markedly reduced colon length, severe body weight loss, increased levels of myeloperoxidase activity and histological damages in mice. ATC treatment significantly ameliorated the colon shortening, histological damage, body weight loss and disease activity index score in a dose-dependent manner. ATC also attenuated the colonic myeloperoxidase activity which reflects the severity and extent of inflammatory damage of colon. Conclusions : ATC exerts protective effects against inflammatory colonic structural damage induced by epithelial barrier integrity impairment. ATC also inhibits weight loss and related symptoms of UC which can be considered as the functional recovery of colon.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.95-101
• /
• 2014

The purpose of this study was to investigate the training and detraining effects of a 8-week water exercise on lower extremities coordination during obstacle gait in the female elderly. Eight elderly participants (age: $76.58{\pm}4.97$ yrs, height: $148.88{\pm}7.19$ cm, body mass: $56.62{\pm}6.82$ kg, and leg length: $82.36{\pm}2.98$ cm), who stayed at the Seoul K welfare center, were recruited for this study. All participants had no history of orthopedic abnormality within the past 1 year and completed the aquatic exercise program which lasted for 8 weeks. To identify the training and detraining effect of 8 weeks of water exercise, a 3-D motion analysis with 7 infrared cameras and one force plate sampling frequency set at 100 Hz and 1,000 Hz, respectively, was performed. A two-way ANOVA was performed to find training and detraining effects among diferent obstacle heights. In this study significant level was set at .05. Significant training effects of LTS (lead foot thigh and shank) coordination in all obstacle height were found (p<.05). It is also found that the training effect of LTS remained 37%, 58%, and 25% in obstacle height of 30%, 40%, and 50%, respectively. Lead foot showed the greater detraining effect of coordination compared with trail foot, and SF (shank and foot) coordination revealed better detraining effects of coordination compare with TS (thigh and shank) in both feet. Based on the findings, a 8 week water exercise give an positive effects to the elderly in terms of segment cooperation which potentially helps reducing their accident falls. The magnitude of detraining may also help the elderly to find the retraining moment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.1-5
• /
• 1986

In order to improve the net-mouth height of dragged gears, the authors devised models of floatingcollars of nylon cloth instead of floats and experimented with 4 types-A type (length 65em, breadth 3em), B type (length 65em, breadth 4em), C type (length 65em, breadth 5em) and D type (length 65 em, breadth 6em) attached respectively to the front edge of square of a model net after preliminary experimentation. These various types of floating collars were experimented in a circulating water channel to evaluate the characteristics of net-mouth height and hydrodynamic resistance and the effect of the length of bridles were also examined. The results obtained were as follows: 1. In case of attaching floats, the model net-mouth height reduced from 80 em to 20 em when current velocity was increased from 0.25m/see to 1m/sec. 2. In case of attaching floating collars, the model net-mouth heights were maintained 70 em, 71 em, 80 em, 78 em in maximum and 55 em, 63 em, 69 em, 73 em in minimum respectively even the current volocity was increased from 0.25 m/see to 1 m/see. 3. The model net-mouth height was reduced to 10 em maximum according to the current velocity and types of floating collars when the bridles were shortened 3~4 mm in length. 4. Hydrodynamic resistance of D type only was increased to 700 g in maximum and those of A, B, C type were reduced to 460 g in maximum at current velocity beyond 0.5 m/ see when bridles were shortened 3-4 mm in length. 5. But the model net-mouth heights became higher in accordance with breadth of floating coliars, B type was the best for this model net in case that hydrodynamic resistance was taken into account.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.235-241
• /
• 2004

The dissolved air flotation (DAF) process has been widely used for removing suspended solids with low density in water. It has been known as measuring the size of microbubbles precisely which move upward rapidly in contact zone is difficult. In this study particle counter monitoring (PCM) method is used to measure the rising microbubble after injection from a nozzle. Size and distribution curve of microbubbles are evaluated at different conditions such as pressure drop at intermediate valve, length of pipeline between saturation tank and nozzle and low pressure. And the efficiency is also checked when it collides with different size floc. The experimental results show the following fact. As the final pressure drop occurred closer to a nozzle, the bubble size became smaller. And small bubble collides with large floc as well as small one because of its physical characteristic. However large bubble collides well with large floc rather than small one since hydrodynamic flow in streamline interferes to collide between two. With performing computational process by mathematical model we have analyzed and verified the size effect between bubble and floc. Collision efficiency is the highest when P/B ratio shows in the range of 0.75 < P/B ratio ($R_{particle/Rbubble}$) < 2.0.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.127-133
• /
• 2007

The effects of water flow rate and phytoplankton concentration on the growth of the sandy shore clam Gafrarium tumidum was investigated in a laboratory flume study using a $3{\times}3$ factorial design. After 60 days, shell length, shell weight and tissue dry weight increased significantly with phytoplankton concentration. For the effect of flow rate, growth was faster when flow rate increased from low to medium level; further increases in flow rate, however, either did not sustain faster growth or resulted in a reduction in growth. The condition index (CI) of a standard-sized clam was significantly higher at low flow rate than at medium and high flow rates and was negatively correlated with phytoplankton concentration. The uncoupled growth of shell and tissue in response to flow rate and phytoplankton concentration may be adaptations to low food environments, so that energy can either be stored to sustain life or reserved for gametogenesis during the reproductive period.

• Structural Monitoring and Maintenance
• /
• v.9 no.1
• /
• pp.1-27
• /
• 2022

Extensive laboratory tests were conducted to investigate the effect of load amplitude, geogrid position, and number of geogrid layers, thickness of ballast layer and clay stiffness on behavior of reinforced ballast layer and induced strains in geogrid. A half full-scale railway was constructed for carrying out the tests, the model consists of two rails 800 mm in length with three wooden sleepers (900 mm × 10 mm × 10 mm). The ballast was overlying 500 mm thickness clay in two states, soft and stiff state. Laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, soil pressure and pore water pressure induced in the clay were measured in reinforced and unreinforced ballast cases. It was concluded that the effect of frequency on the settlement ratio is almost constant after 500 cycles. This is due to that the total settlement after 500 cycles, almost reached its peak value, which means that the ballast particles become very close to each other, so the frequency is less effective for high contact particles forces. The average maximum vertical stress and pore water pressure increased with frequency.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.428-432
• /
• 2012

This study was carried out to investigate the effect of carbonated water on the yield, weight, length, thickness, and vitamin C and isoflavone contents of soybean sprouts cultivated for 6 days. 100 g Junjori cultivar soybeans were cultivated at $22{\pm}1^{\circ}C$ with carbonated water (pH 4.5) and drinking water (pH 7.8) for 6 days, respectively, after 6h presoaking treatment. The yield of the soybean sprouts cultivated with carbonated water for 6 days was 255.1 g, approximately 1.45 times higher than the 176.1 g soybean sprouts cultivated in drinking water. The weight and length of the soybean sprouts cultivated with carbonated water were 1.3 and 1.2 times higher, respectively, than those of the soybean sprouts cultivated with drinking water. The same can be said of the thickness of the carbonated- and drinking-water soybean sprouts. The vitamin C contents of the soybean sprouts cultivated with carbonated water was about two times (1.13 mg%) higher than those of the soybean sprouts cultivated with drinking water. The genistein and daidzeinin contents of the soybean sprouts cultivated for 6 days with carbonated water were higher than those of the soybean sprouts cultivated for 6 days with drinking water. The growth characteristics and contents of the useful components of the soybean sprouts were affected more by carbonated water than by drinking water.

• Geomechanics and Engineering
• /
• v.15 no.3
• /
• pp.841-849
• /
• 2018

The purpose of a rock bolt is to improve the mechanical performance of a jointed-rock mass. The performance of a rock bolt is generally evaluated by conducting a field pullout test, as the analytical or numerical evaluation of the rock bolt behavior still remains difficult. In this study, wide range of field test was performed to investigate the pullout resistance of rock bolts considering influencing factors such as the rock type, water bearing conditions, rock bolt type and length. The test results showed that the fully grouted rock bolt (FGR) in water-bearing rocks can be inadequate to provide the required pullout resistance, meanwhile the inflated steel tube rock bolt (ISR) satisfied required pullout resistance, even immediately after installation in water-bearing conditions. The ISR was particularly effective when the water inflow into a drill hole is greater than 1.0 l/min. The effect of the rock bolt failure on the tunnel stability was investigated through numerical analysis. The results show that the contribution of the rock bolt to the overall stability of the tunnel was not significant. However, it is found that the rock bolt can effectively reinforce the jointed-rock mass and reduce the possibility of local collapses of rocks, thus the importance of the rock bolt should not be overlooked, regardless of the overall stability.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.582-588
• /
• 2016

The hydrological simulation program FORTRAN (HSPF) is a comprehensive watershed model that employs the hydraulic function table (FTABLE) (depth-area-volume-flow relationship) to represent the geometric and hydraulic properties of water bodies. The hydraulic representation of the HSPF model mainly depends on the accuracy of the FTABLES. These hydraulic representations determine the response time of water quality state variables and also control the scour, deposition, and transport of sediments in the water body. In general, FTABLES are automatically generated based on reach information such as mean depth, mean width, length, and slope along with a set of standard assumptions about the geometry and hydraulics of the channel, so these FTABLES are unable to accurately describe the geometry and hydraulic behavior of rivers and reservoirs. In order to compensate the weakness of HSPF for hydraulic modeling, we generated alternate method to improve the accuracy of FTABLES for rivers, using the surveyed cross sections and rating curves. The alternative method is based on the hydraulics simulated by HEC-RAS using the surveyed cross sections and rating curves, and it could significantly improve the accuracy of FTABLES. Although the alternate FTABLE greatly improved the hydraulic accuracy of the HSPF model, it had little effect on the hydrological simulation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.133-133
• /
• 2018

The aim of this study was to evaluate the effect of charcoal on germination and early growth of barley sprouts. Five treatments were employed based on different amount and treatment method along with control. Barley seeds were soaked in water for 8 hours. Two types of topping treatment were applied such as, charcoal: 100 g (designated as T1) and charcoal: 200 g (T2). Three kinds of mixing treatment were as follows: barley seeds were mixed with 100g of charcoal (designated as M1), with 200g of charcoal (M2), and with 300g of charcoal(M3). The control did not have any charcoal. In our finding, germination rates were observed 53.3% (control), 26.3%(T1), 36.3%(T2), 67.3%(M1), 81.7%(M2), and 79.7%(M3) at three days after inoculation (DAI). Length of radicle was found at 0.90 cm (control), 0.88 cm (T1), 0.99 cm (T2), 1.03cm (M1), 1.66 cm (M2), and 0.70 cm (M3) in 3 DAI. In addition, sprout length was found 4.5 cm (control), 10.4 cm (T1), 11.9 cm (T2), 5.7 cm (M1), 6.3 cm (M2), and 2.1 cm (M3) in 14 DAI. Fresh weight of sprouts were 0.78g (control), 1.03g (T1), 1.07g (T2), 0.96g (M1), 1.07g (M2), and 0.95g (M3). Among the treatment, topping of seeds on 200g of charcoal (T2) showed longest sprout length and fresh weight. Mixing treatments showed higher germination rates and sprout fresh weight. The results may be attributed to difference in micro-climate conditions (mostly temperature and humidity) in the growth boxes in different treatments.