• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.1
• /
• pp.99-106
• /
• 1979

The undehiscent ginseng seed did not germinate, even if the seeds were treated with GA_3, kinetin or IAA. Only GA_3 stimulated germination of dehiscent ginseng seed. The physiological roles of gibberellic acid on stimulation of the seed germination were enhancing production of soluble carbohydrate and sucrose. Then gibberellic acid stimulated biosynthesis of insoluble cellural materials and amino acids from sugars and incorporation of amino acids into protein. The fruit coat of ginseng seed did not impede water imbibition, but did function as water absorbor and reservoir.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.535-542
• /
• 1998

Cotton fabrics were treated with BTCA, which is used to improve the wrinkle recovery property of cotton fabrics. BTCA, with varying its concentrations, was treated on cotton fabrics by pad dry-cure technique. BTCA contents in treated cotton fabrics were determined by the weight gain and the FT-lR spectrometer. The effects on the sorption and physical properties of BTCA treated fabrics were investigated. IR spectra showed that ester-crosslinks were produced in BTCA treated cotton fabrics. And as increasing the concentration of BTCA, ester-crosslinks are increased in amorphous regions of fabrics. Moisture regain and water imbibition of treated fabrics were reduced. But, they were increased over a certain concentration. Dye sorptions also were reduced, but they were similar over 6% BTCA. When BTCA was treated on cotton fabrics, DP rating and wrinkle recovery angle were improved. On the other hand, strength retentions of treated fabrics were lower than untreated fabrics. Stiffness was increased.

• The Journal of the Korean dental association
• /
• v.16 no.3 s.106
• /
• pp.235-237
• /
• 1978

Dr. Walter Wright first presented the results of his studies on acrylic resins in July, 1937. The use of resins for adaptation in inlay and crown and bridge prosthesis was first reported in June 1940 by Harris. There has been now and acceptable list of several physical and mechanical properties of acrylic resins which have been studied to a considerable extent by various researchers, or determined from clinical experience. They include; pleasant esthetics, taste, odor, cleanliness, compatibility with oral tissue, dimensional stability, water sorption by imbibition, hardness, ease and success of repair, weight, thermal coefficient of expansion and strength to resist functional stress. The author carried a series of experiments forward to check the strength. Specimens which were cured at boiling temperature showed weaker strength than those ones which were cured at 72℃.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2003

Seed germinability might be highly related to seedling establishment. The experiments were carried out to evaluate the effect of presowing treatments of aging, priming, $GA_3$ , prechilling and water imbibition, different temperatures and light quality during germination on germination of gourd (Lagenaria siceraria Standl.) seeds. Aging treatment with different temperatures and periods was done by the accelerated aging method. Priming using KNO$_3$ and $GA_3$ treatment for 24 hours were done at 100 mM and at 0.01 mM before a week prechilling. The germination tests using a week prechilled seeds were done at 10, 20 and $30^{\circ}C$ on the condition of darkness, and also with blue, red, far-red light and darkness as light quality treatments. FR-yongjadaemok and FR-kunghap were used as test cultivars and their daily germination rates were measured at treatment levels. Germination rates were reduced in the seeds aged at $45^{\circ}C$ for 6 days. Prechilling showed the highest and fastest rate among the four presowing treatments but the two other presowing treatments had similar or less rates than water imbibition. Prechilling done before sowing enhanced the low vigor seeds, and accelerated the germination of cv. FR-kunghap at 20 to $30^{\circ}C$ and with blue, red light or darkness during germination although far-red light inhibited their germination.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.411-417
• /
• 2006

This experiment was conducted to study whether priming with deep sea water results in enhancement of seed germination and to identify the optimum concentration of the priming solution, and duration of priming using sweet pepper (Cv. California wonder), rice (Cv. Ilpum) and ginseng seed. Sweet pepper and rice seeds were primed with 5 various concentrations (5%, 10%, 15%, 20% and 30%) for deep sea water for 48 hours, 24 hours and 12 hours at $25^{\circ}C$ and ginseng seeds in 5%, 10%, 15%, 20%, 25% and 30%, and 2,4,6, and 8 electrical conductivity (EC) which were made by desalinating deep sea water. Priming in deep sea water (DSW) improved the early and final germination percentage, mean germinal on rate, emergence percentage and root and shoot length, compared with plain water, $KNO_3$ and without priming treatments. In sweet pepper, 24 hours priming with 5 percentage DSW significantly improved the early germination percentage and radical length. It has also improved the mean germination and emergence days and early emergence percentage, compared with $KNO_3$ and control. Whereas, in rice, 48 hours priming with 10 percent DSW significantly improved the early germination percentage, plumule emergence percentage, root length and shoot height. Hence the best seed priming treatment on sweet pepper and Rice are 24 hours with 5 percentage DSW and 48 hours with 10 percentage DSW, respectively, whereas in ginseng, priming with EC4, EC8 and 25% DSW had shown better germination.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.421-426
• /
• 2008

Freshly harvested seed of Chinese milk vetch (Astragalus sinicus L.; CMV) was strongly dormant because of hardseedness. Seeds of freshly harvested germinated only 8% while clipping the seed coat completely overcome the innate dormancy, which indicates inhibition of germination of the seed is mainly due to seed coat (87%). The dormant (intact) hard seeds did not imbibe water whereas the non-dormant (clipped) seeds took up rapidly. In natural environment condition, the hard seed coat dormancy was broken only after 5 months after seed harvest. To break such a strong seed coat dormancy, the chemical and heat treatments were effective. Concentrated sulfuric acid was more effective than dry heat and hot water treatments. Hot water treatment improved germination but the germination percentage was less than 41%. Treatments increased germination due to its effect on the seed coat integrity. A scanning electron microscope reveled that disruption of seed coat layers and subsequent development of numerous crack in the hilum region of the seed and on the seed coat surface of concentrated sulfuric acid treatment and formation of cracks in the dry heat treatments, respectively, were observed in the seed coat surface, which served as water entry points.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.290-295
• /
• 1998

Presowing treatements to seed are reasonable for elevating the seedling production efficiency. This experiment was carried out to determine the effects of $GA_3$ [0 (water) : 0.01 mM] and light qulaity (red : white) simultaneously treated before sowing on seedling emergence and growth of tobacco (Nicotiana tabacum L.) cv NC 82 and Burley 21. Red or white light was illuminated 12 hours a day while seeds of the cultivars were imbibed with either water or $GA_3$ 0.01 mM for 3 days. Seedling emergence was measured up to 20 days after sowing but morphological characters and dry weights were done 40 days. The seedling emergence rate of cv NC 82 was more affected by light quality and $GA_3$ pretreatments than that of cv Burley 21. Light quality more influenced the rate than $GA_3$ while red light or water imbibition enhanced the rates of the two cultivars compared to the other treatement. Although mean plant height and leaf number per seedling were nearly equal between the treatements, red light declined leaf area per seedling of cv Burley 21 of which seeds were imbibed in water but white light decreased the areas of both cultiars of which seeds were soaked in $GA_3$solution. Shoot dry weight was greater in cv NC 82 but less in cv Burley 21 pretreated with red light, and root dry weight showed the reverse result in white light, meaning that presowing light and $GA_3$ treatments could be changed the seedling development and growth of tobacco.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.694-699
• /
• 2002

The present experiment was carried out to determine the effect of seed-coat softening by various chemicals, washing, chilling, and light treatment alone and in combination during desiccation of seeds on germination of gourd (Lagenaria siceraria Standl.) seeds. Potassium hydroxide, sodium hydroxide, acetone, acetonitrile, and acetamide were used as chemicals for the softening. Washing, prechilling, drying and light treatment of the softened seeds were done for a hour with tap water, for one or three weeks at 3$^{\circ}C$, 12 hr at 35$^{\circ}C$, and 14 hr a day at 3$0^{\circ}C$ with red light illumination or darkness, respectively. FR-yongjadaemok and FR-kunghap were used as test cultivars. Seed-coat softening with 10% acetone and acetonitrile for 1 hour enhanced and accelerated seed germination compared to the other chemicals and water imbibition. KOH treated for the softening was necessary to increase the germination rate of seeds for following chilling, but acetone did not influence their germinability regardless of chilling. Washing the softened seeds in tap water increased the germination rate in comparison with no-washing. During desiccation of the seeds sequentially treated with the softening, washing and chilling, red light treatment showed higher germination rate than dark one, suggesting that red light treatment are necessary during desiccation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.217-217
• /
• 2017

Seed priming leading to improved emergences, germination speed and uniformity under unfavorable conditions without loss of longevity are the best level of techniques. We studied the possibility to obtain primed seed with reduced mean germination time (MGT) and uniformity but with simple, fast and effective methods. The experiments were carried out at $15^{\circ}C$ for 16 hours with priming treatment. To compare the effects of each treatment, we used 200mM $CaCl_2$ priming or hydro priming or no imbibition after ultrasonication or red light treatment. The light treatment was performed by irradiating 2000 lux of red light for 15, 30, 60, and 120 minutes. Addition, in order to investigate the effect of the priming solution, treated at 200mM $CaCl_2$ for 8 hours. Ultrasonication treatment was performed for 5, 10, and 20 minutes at exposures of 13.0, 17.3, and 21.6 kHz during priming. For liquid smoke (LS) treatment, seed soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted water and 200mM $CaCl_2$ solution. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. The effect of seed treatment was evaluated with germination percentage (GP), MGT, germination index(GI), germination rate(GR), Germination Uniformity(GU) and heath seed percentage(HS). For several factors tested, we found that the desired germination improvement could be obtained by treating the seed with ultrasonication at 17.3 kHz for 5 minutes in water or red light exposure at 2000 lux for 120 min in water that resulted very similar to those used to 200mM $CaCl_2$ priming for 16 hrs. However, LS treatment showed no improvement in all diluted solution. Therefore, the methods applied ultrasonication and red light treatment showed high potential for fast and easy treatment avoiding pollution of salt solution waste.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.635-641
• /
• 1996

This study was designed to evaluate the anti cariogenic effect of F in primers, bonding agents, composite resins or glass ionomer cements in enamel. Twenty-five extracted teeth were selected and a cavity was prepared on either the buccal or the lingual surface of each tooth. After pumicing and etching, the samples were divided into 5 groups. In group A, the samples were primed, bonded and filled with ART bond and Brilliant Enamel (Coltene, Switzerland). Group B composed of Optibond and Herculited XRV (Kerr, USA), group C composed of Syntac and Tetric(Vivadent, Lichtenstein), and group D composed of Scotch-bond Multipurpose and Z 100 (3M, YSA). In group E, the samples were filled with glass ionomer cement (Fuji II LC, Japan), All surfaces except the 2mm beyond the cavosurface margin of the sample were protected, and samples were then put into an acid buffer for 3 days to develop the initial caries. The samples were then sectioned through the filling body into thin wafers and then examined with a polarizing microscope under water imbibition. The fluoride in primer, bonding agent, or composite filling material did not prevent the initial caries in the enamel area adjacent to the filling body whereas the fluoride in the glass ionomer did prevent the initial stage caries.