• 물과 미래
• /
• 제29권2호
• /
• pp.209-219
• /
• 1996

1973년 팔당 수력발전소 준공 이래로 사용하여 온 수문조작기준은, 1985년 충주 다목적댐 건설에 따른 한강홍수예경보 프로그램 개선에 따라 일부 수정을 거쳐 사용하고 있다. 그 동안 한강 종합개발 사업의 하도정비사업결과로 팔당댐 하류지역의 수면저하가 가시적으로 발생하게 되었다. 이로 인해 댐 건설당시의 낙차에 변화가 생겼고 댐하류부의 수위가 평균 3m 정도 저하되어 잠수 오리피스식 여수로인 팔당댐의 방류량 산정식에 문제점이 발생하면서 수문개방방식별 방류량의 재산정이 불가피해졌다. 본 연구에서는, 이러한 문제점을 해결하고 수문조작기준을 결정하기 위하여 수리모형실험을 통해 세가지 수문조작 방식을 비교, 검토하였다. 댐우안에 위치한 발전소 설비 및 운영에 영향을 미치지 않는 안전범위를 최우선으로 하여 방류량별, 개도형태별로 하류부에서의 유황을 관찰하였으며, 또한 수치모형으로도 하류부유황을 모의하여 검토한 결과, 좌측 수문 5개씩을 순차적으로 개방하는 방식을 가장 적절한 수문조작기준으로 결정하였다.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1006-1015
• /
• 2010

본 논문은 호수 바닥이 오염된 서산 부남호의 수문을 개방했을 때 예상되는 오염물질의 확산에 관한 것으로 토사 부유물의 확산과 오염물질의 확산으로 나누어 모사하였다. 부남호의 수문을 열었던 예를 기준으로 극한 상황의 몇 가지 각본을 가지고 컴퓨터 모사를 한 결과 방수량 100톤/s를 기준으로 부유물은 50ppm의 농도로 3시간 방류하면 19시간 후 원상태로 회복되며, 극단적인 COD 8인 상태로 1시간 방류하다 중단하면 천수만에 위치한 가두리 양식장에 지장이 없음을 알았다.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.57-66
• /
• 2015

The purpose of this study was to improved the durability of a improved movable weir by replacing the improved movable weir's metal gate with a hybrid steel/glass fiber reinforced polymer composites panel gate. Because the metal gate of a improved movable weir is always in contact with water, its service life is shortened by corrosion. This study made four type of hybrid steel/glass fiber reinforced polymer composites panel gate with different steel gate surface deformation (control, sand blast, scratch and hole), flexural. Fracture properties tests were performed depending on the steel gate surface deformation. According to the test results, the flexural behavior, flexural strength and fracture properties of hybrid steel/glass fiber reinforced polymer composites panel gate was affected by the steel panel gate surface deformation. Also, the sand blast type hybrid steel/glass fiber reinforced polymer composites panel gate shows vastly superior flexural and fracture performance compared to other types.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.70-75
• /
• 2016

Recently, coastal erosion has been widely in progress and the erosion level becomes also serious in the world wide, espeically in East Sea in Korea. Since it would threaten the life, economics and security risk, it is necessary to much comprehend the reason why coastal erosion has occurred according to the geographical characteristics. Meanwhile, analysis about hydrodynamics of the solitary wave such as tunami in swash zone is needed for the best management practice of coastal erosion. Solitary wave is nonlinear wave and can be reproduced in the laboratoy scale by openning suddenly a sluice gate with water head difference, of which methodology was found in the literature, since it could be simply determined by a significant wave height. Thus, in this sutdy the generation of solitary wave was experimentalized using the sluice gate. Experimental conditions were classified by angles of a beach slope, a water level in a beach slope and a difference of water level between in a headtank and a channel bed. Two kinds of dimensionless analyses based from experimental results in this study were presented; the first analysis indicates nondimensionalization between the wave height and the water level in a beach slope in order to investigate characteristics of solitary wave approaching the beach. The second shows the other nondimensionalization between dynamic pressure and static pressure on a beach slope to investigate the relationship between wave breaking and wave pressure. Under the same conditions as laboratory experiments, the numerical results computed with a SWAN model embedded in FLOW 3D were compared in terms of wave height, and pressure on the beach slope, which shows good agreement with each other. Overall results from this study could provide fundamental hydraulic data for the reliabile verification of numerical simulation results about coastal erosion in swash zone caused by solitary waves.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.192-198
• /
• 2006

The real-time simulator of a turning-type sluice gate actuated by the hydraulic cylinders is developed using a PC and a visual C++ program language. The real-time simulator receives the directional control valve signal selected by the operator using the mouse, updates the state variables of the turning-type sluice gate system responding to the control signal, and draws the moving figures of the sluice gate, cylinder, reserved water every drawing time on the PC monitor. Also, the operator can observe the sluice gate angle, cylinder force, cylinder pressures, and hydraulic power representing the operation of sluice gate system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the turning-type sluice gate system.

• 한국농공학회지
• /
• 제37권1호
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.133-136
• /
• 2002

A simulation by the TOPAS model, two dimensional finite difference model was performed on the flows through drainage lock gate for the Saemangeum tidal reclamation project. Analysis focus on the changes of intertidal zone areas according to the operation scheme of the gate. The intertidal zone areas were analyzed as $66{\sim}70\;km^2$ when the opening of the gate was 300 m. It occupied about $85{\sim}90%$ of intertidal zone areas compared to that the Mangyung sea basin was opened without sea-dike. It appeared to be the most effective in terms of securing enough intertidal zone areas when the gate was operated as inflowing sea-water after 2 day's drainage.

• 한국수자원학회논문집
• /
• 제48권5호
• /
• pp.379-391
• /
• 2015

국내 4대강에 설치된 다기능보는 하천을 횡단하는 수공구조물로써 고정보와 가동보로 구분되어 설치되었으며, 각 다기능보의 수문운영 방식에 따라 유량이 변화하여 하상변동 및 유사이동 형태의 변화 가능성이 있다. 본 연구에서는 다기능보의 수문운영에 따른 장기 하상변동을 금강유역을 중심으로 연구하였다. 연구결과, 금강에서는 다기능보의 설치 및 수문운영 시나리오에 따라서 최심하상고의 변화가 연평균하상고의 변화에 비해서 상대적으로 큰 것으로 나타났다. 최심하상고의 하상저하는 최대 2.79 m, 하상상승은 최대 1.90 m까지 발생하는 것으로 나타났으며, 연평균하상고의 하상저하는 최대 2.16 m, 하상상승은 최대 1.24 m까지 발생하는 것으로 나타났다. 또한 하상변동에 따른 홍수위 분석 결과, 다기능보 설치 후에 홍수위가 대부분 상승하는 것으로 나타났으며, 최대 2.23 m까지 상승하는 것으로 나타났다. 이러한 결과로 인해서 제방의 여유고를 상회하는 홍수위가 발생할 가능성이 있기 때문에, 하천의 유사관리 및 하천계획수립을 함에 있어서 다기능보의 수문운영을 고려해야 한다고 판단된다. 또한 본 연구결과는 향후 하천계획을 수립함에 있어서 종단적 하도관리 및 안정하상 채택 등을 위해서 기초자료로 활용될 수 있을 것으로 본다.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.133-139
• /
• 2012

Dynamic characteristic of lift gate supported by plane truss is studied by a model test scaled with the ratio of 1 : 31.25 in the four major rivers project. The vibrations of gate supported by the plane truss is assessed in comparison with those of gate supported by the space truss which was tested formerly. The gate model is made of acryl panel and calibrated by lead. A model test is conducted under the different gate opening and upstream water levels conditions in the concrete test flume dimensioned 1.6 m in width, 0.8 m in height and 24 m in length. In order to verify the model, natural frequencies of the model gate are measured, and compared with the numerical results. The vibrations of gate model supported by the plane truss in opening height of 1.0 cm~2.0 cm shows greater than one supported by the space truss. It is found that the gate model supported by the plane truss is less desirable than one supported by the space truss. thus, the latter type of gate model is requested to design.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.330-335
• /
• 2001

Characteristics of the present world market include demanding and sophisticated customers, requirement of high quality and innovative products, greater product diversity, increasing labour and products costs, availability of diverse alternatives to the customers and smaller batch sizes to satisfy a variety of customer profiles. To fulfil these characteristics, manufacturing companies need to be flexible adaptable, proactive and able to produce variety of products in short time at low cost. The aim of the study is to develop a computer-aided design system for water-gate on AutoCAD R2000 system. The developed system has been written in AutoCAD and VisualLISP with a personal computer, and is composed four modules which are the gate-lifter input module, guide-frame input module, and upgrade module. Based on knowledge-based rules, the system is designed by considering several factors, such as width and height of a water-gate, material, object of product and maximum depth of water.