• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.527-534
• /
• 2021

The demand for sustainable extraction of bioactive compounds from food matrices has been increasing. Water extraction of anthocyanins in aronia was investigated using conventional and ultrasonic-assisted methods. The optimum extraction conditions for the conventional method included a sample-to-water ratio of 1:40 g/mL, extraction temperature 71℃, and extraction time of 39 min. The optimized conditions for ultrasonic-assisted extraction were a sample-to-water ratio of 1:40 g/mL, extraction temperature 80℃, extraction time of 20 min, and an amplitude of 87.2 ㎛. The anthocyanin contents of the two extracts were 155.32 and 158.02 mg/100 g fresh weight, respectively. The major anthocyanins were cyanidin 3-galactoside (65% of the total) and cyanidin 3-arabinoside (30% of the total). The contents of individual anthocyanins and phenolic acids were not significantly different between the two optimized extracts.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.190-195
• /
• 2005

The conditions for the extraction of effective substances from the stem of Opuntia ficus-indica were optimized by a response surface methodology. The total extract yield was maximized under the temperature of $97.77^{\circ}C$, at a time duration of 145.82 min and a water to sample ratio 16.59 mL/g. Moreover, the optimum conditions for the extraction of effective substances were as follows: $84.95^{\circ}C$, 156.50 min and a water/sample ratio of 7.46 mL/g for the phenolics content; and $97.11^{\circ}C$, 139.03 min and a water/sample ratio of 10.91 mL/g for the pectin content. The range of optimum extraction conditions in consideration of the physicochemical properties of the extracts were shown to be as $95-100^{\circ}C$ as the extraction temperature, 120-180 min as extraction time and a water to sample ratio of 5-18 mL/g.

• Food Science and Preservation
• /
• v.8 no.2
• /
• pp.157-163
• /
• 2001

Optimal conditions for hot water extraction of Liriope spicata tuber were investigated with changes in solvent ratio(2∼6 fold) and heating time(1∼5 hr) by response surface methodology. The content of extractable solids increased with an increased in solvent ratio, and the highest content showed at heating time of 3 hr. The content of total steroid saponin increased with a decrease in solvent ratio, and increased with an increase in heating time at increasing the solvent ratio. The content of non-reducing sugar containing oligosaccharides at a lower solvent ratio didn’t show changes depending on heating time, while that at a higher ration decreased with an increase in heating time. Optimal extraction conditions using hot water as the limited conditions of 15∼18% extractable solids, 1.5∼2.0% total steroid saponin, 6∼8% reducing sugar, 6∼7% non-reducing sugar and 13∼15 brix were 3 hrs of heating time and 4 fold of solvent ratio.

• Journal of the Korean Home Economics Association
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2001

Natural red and yellow dyestuff was extracted from safflower (Carthamus tinctorius Linnaeus) by a new process of cellulase extraction compared with the conventional hot water extraction. Dyestuffs were extracted from safflower easily and repeatedly by means of cellulose as safflower cell wall destroyer. It means that new dyestuff extraction by cellulase improves not only yields of dyestuff from safflower successfully but also the rate of repetition of extraction. From the above experiments, the conclusions of this study were summarized as follows. 1. The optimum conditions of dyestuff extraction from safflower by general extraction method were that the solvent was the water of pH 6.0 on yellow dyestuff and 3% $K_2CO_3$ solution on red dyestuff, extraction temperature was $55^{\circ}C$, and extraction time was 30 min. 2. Among various cellulase, the NOVO cellulase was the best cell wall destroyer of safflower and finally produced the largest amount of dyestuff from safflower by cellulase extraction method. 3. The optimum conditions of dyestuff extraction by cellulase extraction method were conducted on 10 unit of cellulase per gram of safflower at $100m{\ell}$ water of pH 5.0 at $50^{\circ}C$ for 30 min.

• Korean Journal of Pharmacognosy
• /
• v.38 no.1
• /
• pp.56-61
• /
• 2007

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharides from red ginseng marc produced by manufacturing alcoholic extract from red ginseng. Method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharides in red ginseng marc. The amounts of acidic polysaccharides in water extract of red ginseng marc were increased with increasing extraction temperature. The contents of acidic polysaccharides were not significantly different despite of the extraction time increasing from 6 hours to 48 hours. The contents of starch in water-extract of red ginseng marc were increased with increasing extraction temperature. The starch amounts in water extract of red ginseng marc extracted for 48 hours were increased. The yields of polysaccharide precipitated from water-extract of red ginseng marc were increased with increasing extraction temperature. The hydration rate of acidic polysaccharides and starch from water-extract of red ginseng marc were decreased with increasing extraction temperature. The contents of starch were not significantly different despite of the extraction time increasing from 6 hours to 48 hours at $8^{\circ}C$. However, the rehydration rate of acidic polysaccharide for 48 hours were decreased at $8^{\circ}C$. The rehydration rate of acidic polysaccharide and starch extracted from 6 hours to 24 hours at $25^{\circ}C$ were not significantly different, but those extracted for 48 hours were increased. From the above results, we suggest that by altering the extraction conditions in red ginseng marc it is possible to develop optimum conditions for extraction that modulate the proportions of acidic polysaccharide and starch.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.458-463
• /
• 2011

The effect of subcritical water for the extraction of total polyphenols and flavonoids from apple peel was investigated, and then the antioxidant activity of the extracts was estimated. Maximum yields of total polyphenolic compounds($36.4{\pm}1.9mg$ quercetin equivalent(QE)/g dried material) and flavonoids($9.9{\pm}0.8mg$ QE/g dried material) were obtained by subcritical water extraction(SWE) with operating conditions of $190^{\circ}C$, 1,300 psi, and 20 min. Furthermore, the highest antioxidant activity($76.1{\pm}1.1%$) was observed in the extract obtained from SWE using the same conditions. The flavonoids from the SWE of apple peel were compared to three conventional extraction methods in terms of their extraction efficiency and antioxidant activity. The SWE was significantly more effective than hot water ($90^{\circ}C$), methanol, and ethanol extraction for flavonoid yield by 4.7-, 2.2-, and 1.3-fold, respectively, and for antioxidant activity by 11.0-, 4.9, and 2.8-fold, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.241-245
• /
• 1997

In order to make natural food color from Gardenia, we investigated optimal conditions of color extraction, and thermal stability and light stability of color extracted compared with Yellow-4. In case of ethanol extraction, optimal conditions for color extraction were substrate 10%, 4$0^{\circ}C$, pH 7.0 and 42rs, respectively. In case of water extraction, optimal conditions for color extraction were substrate 10%, 7$0^{\circ}C$, pH 7.0 and 48hrs, respectively. Extraction yield in the optimal conditions was 75% in ethanol and 63% in water. The thermal stability and light stability of Yellow-4 were both upper 98%, but those of Gardenia yellow color were 62 and 90%, respectively.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.85-91
• /
• 2020

Polyphenols extraction conditions including extraction solvent, temperature, pH and time were optimized for the development of functional bio-convergence materials using non-edible parts of Aronia melanocarpa including its berry. Water, ethanol, and methanol were used for the extraction of polyphenol from aronia leaves, stem and twigs. Water was selected as an extraction solvent because water gave the highest extraction yields. Among the non-edible parts, aronia leaves had the highest total polyphenol content. The polyphenol extraction conditions from aronia leaves were statistically optimized using a experimental design method: reaction time of 4.5 h, extraction temperature of 79.3℃, and pH 7.2. These optimized extraction conditions could be used for the production of functional bio-material.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1363-1372
• /
• 2023

This study is concerned with the optimization of the manufacturing process of a hot water extract containing antioxidant activity from Lycium barbarum, traditionally known to have various physiological activities. For the establishment of the optimization process, the central composite design of response surface methodology(RSM) was used. Thirteen extraction processes were performed by encoding the independent variables, extraction temperature (65.9℃-94.1℃) and extraction time (2.59 hr-5.41 hr). As a result of the experiment, the optimal manufacturing conditions for the extract were 340.0 mg/100 g of GAE at an extraction temperature of 94.1℃ and an extraction time of 5 hr. The maximum yield of flavonoids was 22.44 mg/100 g of HES at an extraction temperature of 94.1℃ and an extraction time of 4 hr. The conditions for producing the extract with the maximum antioxidant capacity (DPPH 92.12%) were 90℃ and 4.5 hr extraction time. Therefore, the optimal manufacturing process conditions for extracts containing total phenol content, flavonoid content, and DPPH radical scavenging activity, which are dependent variables, were extraction temperature of 90-95℃ and extraction time of 4 hr, which were not significantly different from the actual values. Therefore, Lycium barbarum extract rich in total phenol and flavonoid content related to antioxidant function is expected to be used as a functional food and cosmetic material.

• Korean journal of food and cookery science
• /
• v.23 no.1 s.97
• /
• pp.1-8
• /
• 2007

Extraction conditions were optimized using response surface methodology for preparing high-quality, hot water extracts from cultivated Chrysanthemum indicum L. petals. A fractional factorial design was applied to investigate the effects of added sample ratio ($X_1$), extraction temperature ($X_2$) and extraction time ($X_3$) variables on extract properties, such as, soluble solid contents ($Y_1$), sugar content ($Y_2$), ?E ($Y_3$), turbidity ($Y_4$), total phenol ($Y_5$) and DPPH ($Y_6$). Second-order models were employed to generate a 3-dimensional response surface for dependent variables and their coefficients of determination ($R^2$) ranged from 0.8408${\sim}$0.9914. The range of optimum conditions at $80^{\circ}C$ extraction for maximize characteristics of hot water extracts was 2.3${\sim}$2.7 g and 9.2${\sim}$11.2 hr.