• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.424-425
• /
• 2008

This paper presents application of RCM(Reliability Centered Maintenance) in waterworks system. The reliability-based probability model for predicting the failure probability is established and FTA(Fault Tree Analysis) is proposed to considering RCM. To calculate failure probability, Weibull distribution is usually used due to age related reliability. FTA is an engineering analysis which is using logic symbols. The real historical data of CMMS(Computerized Maintenance Management System) make full use of case study for waterworks system. Consequently, the RCM would be likely to permit utilities to reduce overall costs in maintenance and improve the total benefit.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.15-20
• /
• 2008

상수관망의 수리해석 방법은 demand-driven analysis와 pressure-driven analysis로 구분할 수 있으며, 급작스런 용수수요증가, 관거파괴 등과 같이 비정상운영상태인 용수공급시스템의 수리모의에 demand-driven analysis를 사용할 경우 비현실적인 결과를 줄 수 있다. 특히 현재 국내에서는 비상상황에 대한 비상급수계획 수립 시에 demand-driven analysis를 사용하고 있으나, pressure-driven analysis의 적용을 통한 비상급수계획의 적정성 평가가 수행되어야 할 것이다. 본 연구에서는 pressure-driven analysis를 위해 최근 개발된 WaterGEMS모형을 이용하여 2007년 수도정비 사업을 계획한 J시의 비상급수계획의 적정성을 평가하였다. 적용 결과 소블럭의 용수공급 안정성 향상을 위한 방안 제시가 가능하였으며, 수립된 비상급수계획이 적합한 것으로 판단되었다.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.73-82
• /
• 1999

In this study, the optimal analysis for pipe network is performed for the combined ideal pipe network system(CASE 1, CASE 2 and CASE 3) which is composed of 25 nodes, 41 elements, and 1 fixed nodal head with evaluating pressure variation distribution of main and branch in grid composed drainage pipe network. The linear analysis technique used as the analysis method in this study, the KYPIPE being used extensively as the linear technique to design and analysis of pipe network is applied. Firstly, in the analysis of pipe network, the CASE 2 and CASE 3 supply same thing(value) in the result of considering the total flow provided each pipeline, but in the general intension in the case of CASE 2, relative width of supply is more large than CASE 1 and CASE 3. Secondly, in the analysis technique of pipe network, CASE 3 is analysed largest as a result of comparing with same heads, and in the order of their size CASE 2 and CASE 1 were determined but the difference doesn't appear to be obvious. Thirdly, as the result of determining main factor, pressure in the design and analysis of net work. CASE 3 is from Node 3 to 25 than CASE 1 and CASE 2 and it is determined in the order of their size, CASE 2 and CASE 1. Finally, in this study, discharge flow distribution is evaluated in the same condition with 3-type CASE in the case of branch position for designing optimal composed drainage pipe network. As the result of that, branch pipe perform. Therefore, it is thought that the efficient and reasonable management of water supply and sewerage design will be possible if it give all our energies to study at the pipe system design in and out of country in the future.

• 한국해양공학회지
• /
• 제35권6호
• /
• pp.446-456
• /
• 2021

To build an environment facility of a large-scale ocean basin, various detailed reviews are required, but it is difficult to find data that introduces the related research or construction processes on the environment facility. The current generator facility for offshore structure safety evaluation tests should be implemented by rotating the water of the basin. However, when the water in the large basin rotates, relatively large flow irregularities may occur and the uniformity may not be adequate. In this paper, design and review were conducted to satisfy the performance goals of the DOEB through computational numerical analysis on the shape of the waterway and the flow straightening devices to form the current in the large tank. Based on this, the head loss, which decreases the flow rate when the large tank water rotates through the water channel, was estimated and used as the pump capacity (impeller) design data. The impeller of the DOEB current generator was designed through computational numerical analysis (CFD) based on the lift surface theory from the axial-type impeller shape for satisfying the head loss of the waterway and maximum current velocity. In order to confirm the performance of the designed impeller system, the flow rate and flow velocity performance were checked through factory test operation. And, after installing DOEB, the current flow rate and velocity performance were reviewed compare with the original design target values. Finally, by measuring the current velocity of the test area in DOEB formed through the current generator, the spatial current distribution characteristics in the test area were analyzed. Through the analysis of the current distribution characteristics of the DOEB test area, it was confirmed that the realization of the maximum current velocity and the average flow velocity distribution, the main performance goals in the waterway design process, were satisfied.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.91-98
• /
• 2000

The fuels of water-in-oil emulsion have a potential of reducing PM(Particulate Matter) and NOx emissions, and increassing combustion efficiency in the furnaces and the burners. For making the most of the beneficial of the secondary atomization due to the microexplosion, the water droplets distributed in the oil must have the optimal sizes. The purpose of this paper is to investigate the water droplet size distribution characteristics of the different types of the static mixers. For analysing the size distribution characteristics efficiently, image analysis system was constructed and an appropriate image processing algorithm was developed. Two kinds of static mixers: Kenics type and RF type, were tested. As a results, RF type static mixer shows a better characteristics in the mean drop sizes, particularly in the condition of high water content.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.71-78
• /
• 2006

Thermodynamic irreversibility analysis of an air-to-water heat pump system is analyzed in this study. This analysis shows the distribution of irreversibilities(true losses in thermodynamic sense) through the system components and informs us of a potential improvements with the irreversibility factor decreases. The results show that the largest irreversibilities occur in the motor-compressor unit. The remaining irreversibilities are distributed relatively uniformly through the other parts including utilization system. The increase of performance can be attained through either the improvement of adiabatic efficiency of motor-compressor unit(${\eta}_{mc}$) or the reduction of temperature difference(${\Delta}T$). With the decrease of utilization temperature($T_u$) COPH also increases but the exergetic efficiency decreases. The increase of COPH of about 0.05 can be accomplished with 1K decrease of ${\Delta}T$ or $T_u$.

• 상하수도학회지
• /
• 제32권2호
• /
• pp.115-122
• /
• 2018

Direct spring loaded pressure relief valve(DSLPRV) is a safety valve to relax surge pressure of the pipeline system. DSLPRV is one of widely used safety valves for its simplicity and efficiency. However, instability of the DSLPRV can caused by various reasons such as insufficient valve volume, natural vibration of the spring, etc. In order to improve reliability of DSLPRV, proper selection of design factors of DSLPRV is important. In this study, methodology for selecting design factors for DSLPRV was proposed. Dynamics of the DSLPRV disk was integrated into conventional 1D surge pressure analysis. Multi-objective genetic algorithm was also used to search optimum design factors for DSLPRV.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.721-724
• /
• 2006

Among many sources of soil and water pollution, former mining regions also play an important role in distribution and scope of pollution. In response, KMRC has made an investigation into the status mine hazard at the abandoned metalliferous mine area in Korea. In this study, we analyzed distribution of mine hazards at abandoned metalliferous mines using GIS. We considered the distribution of mine hazards and its magnitude for each abandoned mine and displayed the mine hazard index (MHI) using GIS. We divided the MHI value for each mine into 5 classes, and displayed the first class as smallest point symbol and the last class as biggest point symbol. The biggest symbol shows the most serious status of mine hazards. This GIS function was included in the AMGIS system KMRS are running, and it would be helpful to make decision of reclamation priority at abandoned metalliferous mine area.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 1995년도 추계학술대회 발표요약문
• /
• pp.9-21
• /
• 1995

계획지원체계는 도시성장관리수단으로 간선시설 시설확장을 이용하는 우리의 능력을 증진시킨다. 이연구는 그러한 계획지원체계 (PEGASUS: 공간도시체계의 생성 및 분석을 위한 계획환경)의 개발계획의 일환으로서 상수도 시설확장모델의 개발에 관한 연구이다. 이 연구는 토지이용과 개발은 간선시설의 수요를 유발하고 간선시설은 토지가 이용되고 개발되는 방향에 영향을 미친다는 전제하에서 시작된다. 상수도 시설 확장은 2 방법으로 해결될 수 있다: 1) 최적통제이론, 2) MINLP 방법. 이 방법들은 각각장단점을 가지고 있다. 이 연구에서는 동적 시설 확장 크기 및 시기를 동시에 결정할 수 있는 MINLP방법이 채택이 되었다. 상수도 관망해석모델과 동적 상수도 시설 최적화 모델이 상수도계획과 토지이용계획의 동적 연관관계를 해결할 수 있다. 상수도 관망해석모델은 생성된 관경의 적정성을 분석하며 동적 상수도 시설 최적화모델은 변화하는 상수도 수요량을 충족할 수 있는 대안을 작성한다. 표준화기법에 의한 비용편익분석은 가장 경제적인 대안을 선정한다. GIS는 필요 상수도 수요량을 산정하고 시설확장모델의 결과를 이용자에게 보여주는데 훌륭한 역활을 할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.533-538
• /
• 2014

Power generator is one of the most important component of electricity generation system to convert mechanical energy to electrical energy. I t designed robustly to maintain high system reliability during operation time. But unexpected failure of the power generator could happen and it cause huge amount of economic and social loss. To keep it from unexpected failure, health prognostics should be carried out In this research, We developed a health prognostic method of stator windings in power generator with statistical data analysis and degradation modeling against water absorption. We divided whole 42 windings into two groups, absorption suspected group and normal group. We built a degradation model of absorption suspected winding using Fick's second law to predict upcoming absorption data. Through the analysis of data of normal group, we could figure out the distribution of data of normal windings. After that, we can properly predict absorption data of normal windings. With data prediction of two groups, we derived upcoming Directional Mahalanobis Distance (DMD) of absorption suspected winding and time vs DMD curve. Finally we drew the probability distribution of Remaining Useful Life of absorption suspected windings.