• 제목/요약/키워드: water diffusivity

검색결과 147건 처리시간 0.022초

Al-Si-Mg-Cu 합금의 자동차 엔진 사용 온도에서 열처리 조건에 따른 열확산도 변화 (Change in Thermal Diffusivity of Al-Si-Mg-Cu Alloy According to Heat Treatment Conditions at Automotive Engine Operating Temperature)

  • 최세원
    • 한국재료학회지
    • /
    • 제31권11호
    • /
    • pp.642-648
    • /
    • 2021
  • The precipitation effect of Al-6%Si-0.4%Mg-0.9%Cu-(Ti) alloy (in wt.%) after various heat treatments was studied using a laser flash device (LFA) and differential scanning calorimetry (DSC). Solid solution treatment was performed at 535 ℃ for 6 h, followed by water cooling, and samples were artificially aged in air at 180 ℃ and 220 ℃ for 5 h. The titanium-free alloy Al-6%Si-0.4%Mg-0.9%Cu showed higher thermal diffusivity than did the Al-6%Si-0.4%Mg-0.9%Cu-0.2%Ti alloy over the entire temperature range. In the temperature ranges below 200 ℃ and above 300 ℃, the value of thermal diffusivity decreased with increasing temperature. As the sample temperature increased between 200 ℃ and 400 ℃, phase precipitation occurred. From the results of DSC analysis, the temperature dependence of the change in thermal diffusivity in the temperature range between 200 ℃ and 400 ℃ was strongly influenced by the precipitation of θ'-Al2Cu, β'-Mg2Si, and Si phases. The most important factor in the temperature dependence of thermal diffusivity was Si precipitation.

콘크리트 내 이산화탄소 확산계수 예측에 관한 연구 (Diffusivity of Carbon Dioxide in Concrete)

  • 오병환;정상화;이명규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.669-674
    • /
    • 2003
  • The purpose of this study is to identify the diffusion coefficients of carbon dioxide for various concrete mixtures. The test results indicate that the diffusion coefficient increases with the increase of water-cement ratio. The diffusion coefficient decreases with the increase of relative humidity at the same water-cement ratio. The diffusion of carbon dioxide reached the steady-state within about five hours after exposure. It was found that the diffusion coefficient of cement paste is larger then that of concrete or mortar. The quantitative values of diffusivity of carbon dioxide in this study will allow more realistic assessment of carbonation depth in concrete structures.

  • PDF

촉진시험에 의한 콘크리트중의 황산이온 확산계수 추정 (Estimation on the Sulfate Ion Diffusivity in Concrete by Accelerated Test)

  • 문한영;김성수;김홍삼;이승태;최두선
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
    • /
    • pp.425-428
    • /
    • 2000
  • When concrete structures are exposed to sulfate or marin environments, sulfate ions penetrated into concrete make it deteriorate. An accelerated test under potential difference method was performed to evaluate not only the sulfate ion diffusivity in ordinary portland cement and ground granulated blast-furnace slag cement concretes but the effect of slag replacement and water-cement ratio on the sulfate ions diffusivity. As the result of this study, we assumed the sulfate ion diffusivity was significantly related with total passed charge and initial current in concrete. Moreover sulfate ions penetration resistance of ordinary portland cement concrete was superior to that of ground granulated blast-furnace slag cement concrete.

  • PDF

섬유보강 콘크리트의 투수성 측정 기법에 관한 연구 (A Study on Permeability Measuring Method for Fiber Reinforced Concrete)

  • 이상엽;김경원;한만엽;엄주용
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 가을 학술발표회 논문집
    • /
    • pp.260-265
    • /
    • 1996
  • Polyproplyene Fibers have many advantages such as light weight, low cost, chemical stability and duragbility. It has been reported that polypropylene fiber can increase the toughness of concrete and the resistance to crack formation. This study has been performed to investigate the dirability related properties such as permeability and diffusivity of polypropylene fiber reinforced concrete. The permeability and diffusivity were measured with GWT, Poroscope, and electrical conductivity of concrete. From the test result, it is found that the addition of the polypropylene fiber improved the permeability and diffusivity of concrete, when the workability reduction was corrected by water reducer. The relationships between the permeability and diffusivity, and other properties of polypropylene fiber reinforced concrete showed that the tesst results are interrelated each other.

  • PDF

콘크리트의 염소이온 확산계수의 시간의존성에 대한 실험적 고찰 (Experimental Study on the Time-dependent Property of Chloride Diffusivity of Concrete)

  • 최두선;최재진
    • 대한토목학회논문집
    • /
    • 제29권4A호
    • /
    • pp.365-371
    • /
    • 2009
  • 콘크리트 중의 염화물이온 확산특성의 평가는 농도 차에 의한 방법이 보통이지만, 이 방법은 보통 수개월에서 수년으로 많은 시간이 소요된다. 따라서 최근의 연구는 주로 전위차를 이용하여 염화물이온의 이동을 전기적으로 촉진시켜 전기화학적 이론으로 해석하는 촉진 염화물 확산계수 평가 방법들이 주로 연구되고 있다. 따라서 본 연구에서는 다양한 촉진시험 방법 중 하나인 Tang 등의 방법을 이용하여 구한 염화물이온 확산계수와 인공해수 침지시험을 통하여 구한 농도차 염화물이온 확산계수와의 비교 평가를 실시하였다. 포틀랜드시멘트 콘크리트 및 고로슬래그미분말을 시멘트 질량의 40 및 60% 혼합한 고로슬래그미분말 혼합 콘크리트에 대하여 각각 물-결합재비 40, 45, 50 및 60%로 하여 촉진 염화물이온 침투깊이 및 염화물이온의 확산계수를 평가하였다. 염화물이온의 확산계수 및 침투깊이는 시멘트의 수화가 진행될수록, 물-결합재비가 작을수록 크게 감소하였다. 또한 시험 방법별 염화물이온 확산계수의 회귀분석 결과에 의하면, 촉진 및 침지시험으로부터 구한 염화물이온의 확산계수 사이에는 선형함수 형태의 상관관계가 있었으며 결정계수 0.96으로 좋은 상관성을 나타내었다.

열처리에 따른 제2상 석출이 Al-4.5%Cu 합금의 열 물성에 미치는 영향 (Influences of Precipitation of Secondary Phase by Heat Treatment on Thermal Properties of Al-4.5%Cu Alloy)

  • 최세원
    • 한국재료학회지
    • /
    • 제30권8호
    • /
    • pp.435-440
    • /
    • 2020
  • The relationship between the precipitation of secondary phase and the thermal properties of Al-4.5%Cu alloy (in wt.%) after various heat treatments has been studied. Solid solution treatment of alloy was performed at 808 K for 6 hours, followed by warm water quenching; then, the samples were aged in air at 473 K for different times. The thermal diffusivity of the Al-4.5%Cu alloy changed with the heat treatment conditions of the alloy at temperatures below 523 K. The as-quenched specimen had the lowest thermal diffusivity, and as the artificial aging time increased, the thermal diffusivity of the specimen increased in the temperature range between 298 and 523 K. For the specimen aged for five hours, the thermal conductivity was 12% higher than that of the as-quenched specimens at 298 K. It is confirmed that the thermal diffusivity and thermal conductivity of the Al-4.5%Cu alloy significantly depend on their thermal history at temperatures below 523 K. The precipitation and dissolution of the Al2Cu phase were confirmed via DSC for the alloys, and the formation of coefficient of thermal expansion peaks in TMA was caused by precipitation. The precipitation of supersaturated solid solution of Al-4.5%Cu alloys had an additional linear expansion of ≈ 0.05 % at 643 K during thermal expansion measurement.

$\cdot$단백질$\cdot$지질계(불균질계) 식품의 유효열확산율 (On the Effective Thermal Diffusivity of Water-Protein-Fat Food System)

  • 공재열
    • 한국수산과학회지
    • /
    • 제15권2호
    • /
    • pp.154-160
    • /
    • 1982
  • 1) 수-단백질-지질의 3성분계 식품으로서 '두부'를 선택하여 일차원 비정상 열전도에 관한 실험을 행하였다. 두부는 불균질계 물질이지란 '유효'한 개념을 도입하여 유효열확산율을 측정함으로써 수학적으로 균질계 물질로 취급이 가능했다. 2) 저자가 고안 제작한 장치의 성능(performance)및 정도를 검토하기 위하여 표준물질로서 toluene은 물론 얼음(빙)의 열확산율을 측정한 결과, $-5\sim-25^{\circ}C$의 온도역에서 문헌치와 비교하여 재현성 $\pm1.5\%$, 오차 $-2\%$ 정도로 그 신뢰도는 매우 높았다. 3) 경계조건이 경시적으로 변화하는 경우라 찰지라도 Crank-Nicolson's implicit method를 이용하여 열확산율을 구할 수 있는 computer program을 개발했다. 4) 성분조성이 각각 상이한 3종류의 두부의 열확산율을 측정한 결과, 그 양들은 수분, 단백질 및 지질의 각 성분 함량의 분율에 정확하게 의존하고 있음을 보여 주었다.

  • PDF

슬래그 미분말 혼합 콘크리트의 공극구조와 염화물 확산계수와의 관계에 대한 실험적 연구 (An Experimental Study on Relation between Chloride Diffusivity and Microstructural Characteristics for GGBS Concrete)

  • 김태상;정상화;최영철;송하원
    • 콘크리트학회논문집
    • /
    • 제21권5호
    • /
    • pp.639-647
    • /
    • 2009
  • 바닷물에 의한 염해와 동결융해 환경에 노출된 철근 콘크리트구조물의 내구성을 평가하기 위해서는 콘크리트의 미세구조적 특성 및 염화물 침투성에 대한 콘크리트의 확산 저항성을 동시에 분석하는 것이 중요하다. 이 연구에서는 고로슬래그 미분말(GGBS)을 혼합한 콘크리트에 대하여 수은압입법(MIP)에 의해 얻어진 콘크리트의 미세공극 구조와 장기 및 단기 재령의 염화물 확산성과의 상관성에 대하여 연구하였다. 물시멘트비는 40, 45, 50%로 변화시키고, 단위시멘트량을 300, 350, 400, 450 kg/$m^3$으로 변화시킨 OPC 및 GGBS 콘크리트 시편에 대하여 동결융해에 의해 손상된 GGBS 콘크리트에서의 확산성과 미세구조의 변화를 관찰하였다.

Calculation of Thermal Conductivity and Heat Capacity from Physical Data for Some Representative Soils of Korea

  • Aydin, Mehmet;Jung, Yeong-Sang;Lee, Hyun-Il;Kim, Kyung-Dae;Yang, Jae-E.
    • 한국토양비료학회지
    • /
    • 제45권1호
    • /
    • pp.1-8
    • /
    • 2012
  • The thermal properties including volumetric heat capacity, thermal conductivity, thermal diffusivity, and diurnal and annual damping depths of 10 representative soil series of Korea were calculated using some measurable soil parameters based on the Taxonomical Classification of Korean Soils. The heat capacity of soils demonstrated a linear function of water content and ranged from 0.2 to $0.8cal\;cm^{-3}^{\circ}C^{-1}$ for dry and saturated medium-textured soil, respectively. A small increase in water content of the dry soils caused a sharp increase in thermal conductivity. Upon further increases in water content, the conductivity increased ever more gradually and reached to a maximum value at saturation. The transition from low to high thermal conductivity occurred at low water content in the soils with coarse texture, and at high water content in the other textures. Thermal conductivity ranged between $0.37{\times}10^{-3}cal\;cm^{-1}s^{-1}^{\circ}C^{-1}$ for dry (medium-textured) soil and $4.01{\times}10^{-3}cal\;cm^{-1}s^{-1}^{\circ}C^{-1}$ for saturated (medium/coarse-textured) soil. The thermal diffusivity initially increased rapidly with small increases in water content of the soils, and then decreased upon further increases in the soil-water content. Even in an extreme soil with the highest diffusivity value ($1.1{\times}10^{-2}cm^2s^{-1}$), the daily temperature variation did not penetrate below 70 cm soil depth and the yearly variation not below 13.4 m as four times of damping depths.