• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.847-856
• /
• 2018

This research aimed to evaluate the effectiveness of hot water ($43-53^{\circ}C{\cdot}5min^{-1}$; $47^{\circ}C{\cdot}2-6min^{-1}$), 1-methylcyclopropene (1-MCP) at $50-300nL\;L^{-1}$ and a combination of hot water ($47/49^{\circ}C{\cdot}5min^{-1}$) and phosphite $40%\;P_2O_5+20%\;K_2O$;$40%\;P_2O_5+10%\;Zn$) in anthracnose control and the effect on fruit quality [fresh weight loss (FWL-%); pH, total soluble solids ($TSS-^{\circ}Brix$), and titratable acidity (TA = % citric acid (CA)] of passion fruit ( Passiflora edulis f. flavicarpa ) at the postharvest stage. When the fruits were in the stage of 0% dehydration and fully yellow peels, they were disinfested and inoculated with Colletotrichum gloeosporioides. They were then subjected to the above mentioned treatments; this was followed by incubation for 120 h. The diameter of the disease lesions was monitored daily. After the incubation, a physico-chemical analysis was performed. Hot-water treatment resulted in disease reduction at 47 and $49^{\circ}C$ for 4 and 5 min. The combination of hot-water treatment at $47^{\circ}C$ (4 or 5 min) and application of the phosphite of K or Zn significantly reduced disease severity in fruits. The 1-MCP treatment reduced anthracnose severity in passion fruit mainly at $200nL\;L^{-1}{\cdot} 24h^{-1} $. None of the treatments significantly changed the physico-chemical characteristics of the fruit [FWL (2.6-4.1%); pH (3.2-3.5), TSS ($8.9-10.9^{\circ}Brix$), and TA (1.8-2.5% CA)].

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.35-42
• /
• 2022

To investigate the effects of ozonated water concentration and soaking time on adventitious root formation of willow, we studied the efficiency of root cuttings in the revegetation technology of biological engineering of willows. The ozonated water concentrations were used for 5 minutes and 2 hours at 1, 5, 10, 15, 20 ppm by soaking method and then the shoot characteristics were observed. The number and length of adventitious roots were determined. The results indicated that 20 ppm of ozonated water for 2 hours and 1 ppm of ozonated water for 5 minutes resulted in leaves turned wither away and no adventitious root production. Considering the appearance, number and length of the adventitious root, soaking willow cuttings into the ozonated water with dissolved ozone concentration, 5 ppm for 2 hours and 10-15 ppm for 5 minutes were suitable for generating adventitious roots.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.225-233
• /
• 2023

This paper implements a system that monitors human body lifting information in the event of a marine accident. The monitoring system performs ultrasonic communication through a lifting device controller that transmits underwater environment information, and LoRa communication is performed on the water to provide GPS information within 10 km to the control center or mother ship. The underwater lifting controller transmits pneumatic sensor, gyro sensor, and temperature sensor information. In an environment where the underwater conditions increase by one atmosphere of water pressure every 10m in depth, and the amount of air in the instrument decreases by half compared to land, a model of a 60kg underwater mannequin is used. Using one 38g CO2 cartridge in the lifting appliance SMB(Surface Maker Buoy), carry out a lifting appliance discharge test based on the water level rise conditions within 10 sec. Underwater communication constitutes a data transmission environment using a 2,400-bps ultrasonic sensor from a depth of 40m to 100m. The monitoring signal aims to ensure the safety and safe human structure of the salvage worker by providing water depth, water temperature, and directional angle to rescue workers on the surface of the water.

• Journal of Korean Clinical Nursing Research
• /
• v.15 no.1
• /
• pp.43-53
• /
• 2009

Purpose: This study aimed to compare the moisturizing effect of cold water gargling, wet gauze application and humidification in reducing thirst and mouth dryness after nasal surgery. Method: Patients were randomly assigned into three groups of 19 subjects each. In the two intervention groups, each group was received hourly cold water gargling or wet gauze application for 4 hours postoperatively. In the control group, the subjects were received only humidification continuously on a bedside. We compared the thirst and oral condition at 0, 2, 4hours. after operation. Thirst was measured using VAS questionnaire, and oral condition(mouth dryness) by Oral Assessment Guide. Results: There was a significant difference among three groups in the level of thirst and mouth dryness. In the cold water gargling group, there was a significant decrease in thirst at 2, 4hours. In the wet gauze group, there was a significant decrease in thirst at 4hours. In the intervention group, there was a significant decrease in mouth dryness at 2, 4hours. In the control group, there was a significant decrease in mouth dryness at 4hours. Conclusion: The findings of this study suggest that the cold water gargling would be an effective nursing intervention to reduce thirst and mouth dryness postoperatively.

• Wind and Structures
• /
• v.34 no.3
• /
• pp.275-290
• /
• 2022

Mobile sand barriers are a new type sand-retaining structure that can be moved and arranged according to the engineering demands of sand control. When only used for sand trapping, mobile sand barriers could be arranged in single row. For the dual purposes of sand trapping and sand stabilization, four rows of mobile sand barriers can be arranged in a staggered form. To reveal the effect of plane layout, the included angle between sand barrier direction and wind direction on the characteristics of flow fields and the sand control laws of mobile sand barriers, numerical computations and wind tunnel tests were conducted. The results showed that inflows deflected after passing through staggered arrangement sand barriers due to changes in included angle, and the sand barrier combination exerted successive wind resistance and group blocking effects. An analysis of wind resistance efficiency revealed that the effective protection length of staggered arrangement sand barriers approximately ranged from the sand barrier to 10H on the leeward side (H is sand barrier height), and that the effective protection length of single row sand barriers roughly ranged from 1H on the windward side to 20H on the leeward side. The distribution of sand deposit indicated that the sand interception increased with increasing included angle in staggered arrangement. The wind-breaking and sand-trapping effects were optimal when included angle between sand barrier direction and wind direction is 60°-90°.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.703-718
• /
• 2021

An irrigation monitoring system is an efficient approach to save water and to provide effective irrigation scheduling for rice cultivation in desert soils. This research aimed to design, fabricate, and evaluate the basic performance of an irrigation monitoring system based on information and communication technology (ICT) for rice cultivation under drip and micro-sprinkler irrigation in desert soils using a Raspberry Pi. A data acquisition system was installed and tested inside a rice cultivating net house at the United Arab Emirates University, Al-Foah, Al-Ain. The Raspberry Pi operating system was used to control the irrigation and to monitor the soil water content, ambient temperature, humidity, and light intensity inside the net house. Soil water content sensors were placed in the desert soil at depths of 10, 20, 30, 40, and 50 cm. A sensor-based automatic irrigation logic circuit was used to control the actuators and to manage the crop irrigation operations depending on the soil water content requirements. A developed webserver was used to store the sensor data and update the actuator status by communicating via the Pi-embedded Wi-Fi network. The maximum and minimum average soil water contents, ambient temperatures, humidity levels, and light intensity values were monitored as 33.91 ± 2 to 26.95 ± 1%, 45 ± 3 to 24 ± 3℃, 58 ± 2 to 50 ± 4%, and 7160-90 lx, respectively, during the experimental period. The ICT-based monitoring system ensured precise irrigation scheduling and better performance to provide an adequate water supply and information about the ambient environment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.79-79
• /
• 2023

With the development of digital technology, the size of the smart agriculture market at home and abroad is rapidly expanding. It is necessary to establish a foundation for sustainable precision agriculture in order to respond to the aging of rural areas and labor shortages. This study was conducted to establish an automated digital agricultural test bed for soybean production management using data suitable for agricultural environmental conditions in Korea and to demonstrate the field of leading complexes. In order to manage water smartly, we installed a subsurface drip irrigation system in the upland field and an underground water level control system in the paddy field. Based on data collected from sensors, water management was controlled by utilizing an integrated control system. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. The main growth characteristics and yield, such as stem length, number of branches, and number of nodes of the main stem, were investigated during the main growth period. During the operation of the test bed, drought appeared during the early vegetative growth period and maturity period, but in the open field smart agriculture test bed, water was automatically supplied, reducing labor by 53% and increasing yield by 2%. A test bed was installed for each field digital farming element technology, and it is planned to verify it once more this year. In the future, we plan to expand the field digital farming technology developed for leading farmers to the field.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.382-384
• /
• 1996

This paper introduces the controller development of booster multi-pump system with constantly estimated control algorithm. Through analyzing by the experiment of optimal pressure with a certain flow rate. The larger pressure processing apparatus in microprocessor makes optimal water-supplying. This method is implemented with the only pure control algorithm without any other mechanical or circuitry apparatus. Also, Pump's life is lengthened by exchanging simple on, off and rotational inverter control. Optimal condition for pump is adjusted by the inverter control, and compact control panel helps the booster system install in real field.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1148-1160
• /
• 2001

An electronic control system of the automobile engine for optimal start and idle speed control has been developed. This system employs the microcoputer-based electronic control unit and crank angle sensor for precise control on fuel injection, ignition timing, and idle speed more quickly and accurately at the start and idling. Consequently, the number of misfire can be reduced during been affected by air flow rate, idle quality(roughness), spark timing, fuel injection, water temperature, and load, Thus, this electronic control system strivers to reach the optimal idle operating point, defined the lowest idle speed(fuel economy) and idle quality(roughness), under any engine operating conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.282-286
• /
• 1999

This paper describes the implementation of a fuzzy temperature measuring & control system to control the water temperature in plant. This system consisted of mainly three parts; sensing part, control part that includes a control algorithms introduced the fuzzy theory, and actuating part. The control algorithms of control part are utilized a look-up table method and firmware technique using one-chip microprocessor(89C52). For evaluating the performance of a fuzzy control system, the experiment results of a fuzzy controller are compared with these of a conventional PID controller which provides an auto-tuning function. The experiment results show that the proposed controller has a good control performance and is robust to external disturbance.