• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.285-290
• /
• 1997

This study was conducted to develop labor-saving pesticide-fertilizer mixed formulation through a single application of mixed formulation of an insecticide imidacloprid coated on a slow release urea. The release of both total nitrogen and imidacloprid into water was delayed with increasing adhesive.Imidacloprid was released out 95% within 24 hours, whereas total nitrogen released in mixed formulation until 40 days was released less extent by increasing adhesive. There was no difference between pesticide-fertilizer mixed formulation and coated urea thereafter. The content of $NH_4-N$ in the soil treated with pesticide and urea seperating was higher until 10 days but gradually decreased compare to that of pesticide-fertilizer mixed formulation or coated urea. The population density of nitrate reducing bacteria and denitrifying bacteria in soil after treatment were lower in the pesticide-fertilizer mixed formulation and coated urea than those of pesticide and urea separate treatment. The residue of imidacloprid in soil was slightly higher in the treatment of pesticide alone than the pesticide-fertilizer mixed formulation and pesticide and urea seperating treatment. The population and control efficacy of small brown planthopper, Laodelphax striatellus, were not significance different among treatments.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.414-418
• /
• 2011

BACKGROUND: Plastic mulches widely used in raised-bed culture mainly to conserve water, control weeds and raise soil temperature. The most widely used plastic mulch colour is black. Reflective red and far-red light can affect on growth and yield of various vegetable crops. Objectives of this study were to investigate the characteristics of reflective light of black and red plastic mulches, and to evaluate the reflective red and far-red light on the quality characteristics and yield of the Oriental melon (Cucumis. Melo L.) and tomato (Lycopersicon esculentum L.). METHODS AND RESULTS: Oriental melon and tomato were cultivated over the reflective red and black plastic mulches in plastic house. Reflected red and far-red light over the red plastic mulch were 2.6 times higher than those of black plastic mulch. Red to F-Red ratio of black plastic mulch, red plastic mulch and sunlight were 1.14, 0.93 and 1.16 respectively. Intensity of reflected red and far-red light over red plastic mulch were highest at surface height of 30 cm. The higher the height of the surface decrease the intensity of far-red light. Accordingly, Red to F-Red ratio were increased. Reflective red plastic mulch increased the weight of fruit and content of sugar in Oriental melon and tomato. CONCLUSION(s): Yield of Oriental melon over reflective red plastic mulch was higher than that of black plastic mulch. These results suggested that reflected red and far-red light over the red plastic mulch affected allocation of photosynthate in growing Oriental melon.

• Korean Journal of Environmental Biology
• /
• v.22 no.3
• /
• pp.411-418
• /
• 2004

Mercury, one of the most diffused and hazardous organ-specific environmental contaminants, exists in a wide variety of physical and chemical states. The murcury with the nature which evaporates easily can cause an acute or chronic mercury poisoning to workers at mercury-handling workplaces. Although many studies indicate that mercury induces a deleterious damage, little has been reported from the investigations of mercury effects at surrounding levels in living things. The purpose of this study was to evaluate the biological effects of mercury chloride and ionizing radiation. Prepubertal male F344 rats were administered mercury chloride in drinking water throughout the experimental period or were given wholebody irradiation with a dose of 6.5 Gy. The amount changed of body weight during the experimental period showed a 4.9% rise in the mercury-treated group and 14.4% decline in the irradiated group compared with the level of the control group. The results of hematological analysis (red blood cells, white blood cells, hemoglobin, and hematocrit) indicated the differential effects of mercury chloride and ionizing radiation. However the concentration of cortisol as assessed by radioimmunoassay increased in both of the groups. Relative expressions of mRNA related to mitochondrion-mediated apoptosis were investigated using semiquantitative reverse transcription polymerase chain reaction on gonad and urinary organs of the experimental groups. While the expression of Bcl-2 mRNA exhibited different patterns depending on the organs or the experimental groups, both of the experimental groups showed a conspicuous expressions of Bax mRNA. In conclusion, the target organ of mercury chloride seems to be a urinary organ and the pattern of damage induced by mercury chloride differs from that by ionizing radiation.

• Journal of Animal Science and Technology
• /
• v.60 no.11
• /
• pp.27.1-27.8
• /
• 2018

Background: Enteric methane ($CH_4$) accounts for about 70% of total $CH_4$ emissions from the ruminant animals. Researchers are exploring ways to mitigate enteric $CH_4$ emissions from ruminants. Recently, nano zinc oxide (nZnO) has shown potential in reducing $CH_4$ and hydrogen sulfide ($H_2S$) production from the liquid manure under anaerobic storage conditions. Four different levels of nZnO and two types of feed were mixed with rumen fluid to investigate the efficacy of nZnO in mitigating gaseous production. Methods: All experiments with four replicates were conducted in batches in 250 mL glass bottles paired with the ANKOM$^{RF}$ wireless gas production monitoring system. Gas production was monitored continuously for 72 h at a constant temperature of $39{\pm}1^{\circ}C$ in a water bath. Headspace gas samples were collected using gas-tight syringes from the Tedlar bags connected to the glass bottles and analyzed for greenhouse gases ($CH_4$ and carbon dioxide-$CO_2$) and $H_2S$ concentrations. $CH_4$ and $CO_2$ gas concentrations were analyzed using an SRI-8610 Gas Chromatograph and $H_2S$ concentrations were measured using a Jerome 631X meter. At the same time, substrate (i.e. mixed rumen fluid+ NP treatment+ feed composite) samples were collected from the glass bottles at the beginning and at the end of an experiment for bacterial counts, and volatile fatty acids (VFAs) analysis. Results: Compared to the control treatment the $H_2S$ and GHGs concentration reduction after 72 h of the tested nZnO levels varied between 4.89 to 53.65%. Additionally, 0.47 to 22.21% microbial population reduction was observed from the applied nZnO treatments. Application of nZnO at a rate of $1000{\mu}g\;g^{-1}$ have exhibited the highest amount of concentration reductions for all three gases and microbial population. Conclusion: Results suggest that both 500 and $1000{\mu}g\;g^{-1}$ nZnO application levels have the potential to reduce GHG and $H_2S$ concentrations.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.96-100
• /
• 2014

Recently, the management system of wastewater treatment facility has magnified due to the stringent regulations for the protection of the environment, and a sewage treatment plant efficiency and research of the car development are activated in large facilities or industrial park. however, the existing sewerage disposal system and specific water quality monitoring network reliability for real-time transmission of this building is insufficient. In this paper, we proposed a local wireless network design for sludge multi meter data collection and control for measuring the concentration of the sludge efficiently. Also, the collected data over the local wireless network to transmitted to the central monitoring system and accumulate the data in real time to calculate statistics is possible to monitor the status of the sewage treatment facilities. The proposed system uses a short-range wireless networks of IEEE 802.15.4 and configures an IEEE 802.11 network which can monitor real-time status in central system. Also, we install a sludge multimeter and communication network in sewage treatment facilities and confirm the usefulness of the proposed technique by demonstrating its effectiveness.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.634-647
• /
• 2019

Purpose: Currently, many chemicals are used in industrial and real life, and many substances are used in the form of a single substance, but most of them are used in the form of a mixture, and there is a need for a criterion for judging the danger of these substances. Method: Therefore, this study aims to confirm the risk criteria of the mixture through experimental studies on flammable mixtures in order to secure the effectiveness of the details of the existing Dangerous Goods Safety Management Act angerous Goods Judgment Criteria and to ensure the reliability and reproducibility of the dangerous goods judgment. Result: Experimental results show that alcohol flash point is mixed with water, which is a non-flammable liquid. Similar flash point trends occurred around 60% on an alcohol basis. In addition, in the case of flammable-combustible mixtures, there was little change in flash point if the flash point difference of the two materials was not large, and if the flash point difference of the two materials was low, the flash point tended to increase with the increase of the high flash point material. Conclusion: In the future, the test results may provide reference data on the experimental criteria for the flammable liquids that are cracked at the fire site.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.463-486
• /
• 1995

The effect of moistening and air-drying of acid-conditioned dentin before priming on the formation of resin-dentin hybrid zone was investigated, Freshly extracted human molars were used and divided at random into 5 groups, Groups 1 - 3 consisted of specimens conditioned with 10 % phosphoric acid for 20 seconds; Group 1 served as a control in which the conditioned dentin was simply blot-dried with a damp facial tissue; Group 2 was air dried for 30 seconds ; Group 3 was air dried for 30 seconds and immediately remoistened for 10 seconds with air-water syringe. and then the specimen was blot-dried with a damp facial tissue. Groups 4-5 were not acid conditioned ; In group 4, the smear layer on the dentin was blot dried before primer placement; Group 5 was air dried only for 30 seconds, The acetone-based primer and bonding agent of All Bond 2 (Bisco. Inc., USA) and composite resin (Z-100, 3M Dental products, USA) were applied for acid conditioned dentin and non-conditioned dentin. The morphologic ultrastructure of resin-dentin hybrid zone was examined by the use of SEM and TEM. and the existence of inorganic material and analysis of Ca/P weight-percent ratio in the resin-dentin hybrid zone were revealed by the EDAX, The results were as follows : 1. In the moistened specimens from acid-conditioned groups, the resin penetrated about 3-$4{\mu}m$ into dentin and the denatured collagen smear layer was not present at the surface. The resin tag was formed to a thickeness of 3-$4{\mu}m$ at the upper part of dentinal tubule and compactively connected to each other by means of many lateral branching. 2. In the air-dried specimens from acid-conditioned groups, the resin penetrated about 2.0-$2.5\;{\mu}m$ into dentin and an upper thin black layer to a thickness of 30-35nm was identified between adhesive resin and demineralized collagen layer. The resin tag to have a diameter of $2.5{\mu}m$ was formed at the upper part of dentinal tubule. However the funnel shape of the tag was not notable compared to the moistened specimens. 3. In the remoistened specimens from acid conditioned groups, the resin penetrated about 2.0-$2.5{\mu}m$ into dentin and an upper black layer was not present. The resin tag at the upper part of dentinal tubule was formed less than $2{\mu}m$ and was weakly connected to each other by means of few lateral branching. 4. In the non-conditioned groups, the smear layer was formed to a thickness of $0.5{\mu}m$ at dentin surface. However, the resin-dentin hybrid zone was not identified by TEM. The evidence of resin penetration into intertubular and intratubular dentin did not show. 5. All the acid-conditioned groups showed that the detected calcium and phosphorus weight percent ratios at the $2{\mu}m$ upper portion from the resin-dentin interface into the resin were much higher than that at the $2{\mu}m$ lower portion from the resin-dentin interface to dentin. (P<0.01).

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.165-171
• /
• 2013

YoungDo bridge is the first suspension bridge in Busan which experienced several times repair and reinforcement after completion in 1934. The bridge is under demolition for extension and restoration work since 2011. The purpose of this research is to establish data base about modern concrete. The mix design of the concrete is like that cement : fine aggregate : coarse aggregate = 1 : 2 : 4 or 1 : 3 : 6 by the parts. The compressive strength is in the ranges from 50 to 55 MPa and the elastic modulus is in the ranges from 25 to 35 GPa. From the fact that the deviation is less than 10 %, considerably high quality control was conducted in those days. The carbonation depth is 5.92 cm at the bridge post and 14.3 cm at the machine room. That is why ocean environment keeps the high humidity. The diffusion coefficient of chloride ion through the pores in concrete is 1.052e-12 $m^2/s$ from the regression analysis using the experiment data. The water cement ration is estimated at approximately 35 % in case if the concrete using ordinary Portland cement.

• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.451-463
• /
• 2001

목적 - Inflammatory cytokine으로 알려진 interleukin 1$\beta$, tumor necrosis factor $\alpha$는 치수 및 치근단질환에서 주요한 역할을 하며, 골흡수를 자극하고 골형성을 방해하는 것으로 알려져 왔다. 이들 cytokine은 주로 단핵세포/대식세포가 형성하는 것으로 알려져 왔으나 최근 연구에 의하면, PMN도 또한 이 런 cytokine들을 형성할 수 있다는 것이 보고되었다. 오랫동안 염증반응이나 면역반응에서 PMN의 역할이 주로 포식작용 을 통해 병원균을 제거하는 것이라고만 생각되어져 왔던 것을 생각하면, 새로운 발견이라 할 수 있다. 또, PMN은 IL-1ra도 생성하는 것으로 보고되었는데, IL-1ra란 IL-1의 생물학적 작용을 방해하는 인자이므로, IL-1과 밀접한 관련을 가지는 질환의 발전에 있어서 IL-1과 IL-1ra의 balance가 매우 중요한 역할을 할 것으로 생각된다 즉, IL-1ra는 IL-1$\beta$의 proinflammatory effect를 제한할 수 있는 negative feedback mechanism이라고 할 수 있다. 이 연구의 목적은 치수 및 치근단 조직의 감염에 있어서 주요 원인균인 Porphyromonas endodontalis의 LPS가 PMN의 IL-1$\beta$, TNF-$\alpha$, IL-1ra생성에 미치는 영향을 단백질과 mRNA 수준에서 관찰하는 것이다. 잘 알려진 non-oral bacterium인 E. coli의 LPS를 positive control로 사용하였으며, IL-1ra가 IL-1$\beta$의 생물학적 작용을 방해하는 작용을 관찰하기 위해, IL-1의 biological assay도 시행하였다. 방법 - P. endodontalis ATCC 35406을 혐기성 조건에서 배양하고, hot phenol-water extraction의 방법으로 LPS를 추출(crude LPS)한 후, 제조회사로부터 구입한 E. coli의 crude LPS와 함께 정제하였다. 건강한 자원자들을 대상으로 말초혈액을 채취한 후 dextran sedimentaion을 거쳐 Lymphoprep을 이용하여 PMN층을 분리하였다. 얻어진 세포들은 RPMI 1640 (supplemented with fetal bovine serum antibiotics)에 5$\times$$10^{6}$cells/ml이 되도록 resuspend시킨 후 각기 다른 농도 (0, 0.01, 0.1, 1 and 10$\mu$g/ml)의 LPS를 처리하여, 각기 다른 시간(Northern blot : 1, 2, 4시간 ELISA : 2, 6, 12, 18시간)동안 37$^{\circ}C$ in 5% $CO_2$ 의 조건으로 배양하였다. 상층액은 -7$0^{\circ}C$에 보관하였다가 추후에 ELISA를 이용한 단백질 농도 측정과 IL-1 biological assay에 사용되어졌으며, 배양된 세포로부터 RNA를 추출하여 Northern hybridization을 통해 mRNA expression을 관찰하였다. (중략)

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.223-231
• /
• 2009

The purpose of this study was to evaluate the effect of a desensitizer on dentinal bond strength in cementation of composite resin inlay. Fifty four molar teeth were exposed the occlusal dentin. Class I inlay cavities were prepared and randomly divided into six groups. Control group: no agent, Group 1 : Isodan, Group 2 : One-step, Group 3 : All-Bond SE, Group 4 : Isodan + One-step, Group 5 : Isodan + All-Bond SE. Desensitizing agent and dentin bonding agents were applied immediately after the completion of the preparations. Impressions were then made. The composite resin inlays (Tescera, Bisco) were fabricated according to the manufacturers' guidelines. Cementation procedures followed a standard protocol by using resin cement (Bis-Cem, Bisco). Specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. All specimens were sectioned to obtained sticks with $1.0{\times}1.0\;mm^2$ cross sectional area. The microtensile bond strength (${\mu}TBS$) was tested at crosshead speed of 1 mm/min. The data was analyzed using one way ANOVA and Tukey's test. Scanning electron microscopy analysis was made to examine the details of the bonding interface, 1. Group 1 showed significantly lower ${\mu}TBS$ than other groups (p<0.05). 2. There was no significant difference between the ${\mu}TBS$ of Group 3 and Group 5. 3. The ${\mu}TBS$ of Group 4 showed significantly lower than that of Group 2 (p<0.05). In conclusion, a desensitizer (Isodan) might have an adverse effect on the bond strength of composite resin inlay to dentin.