• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1977

The purpose of this study is to complish a method of fish glue malting with residual products such as fish head and skin discarded from sea food processing. Using the skins of Alaska pollack and file fish from fillet packers, the optimum conditions of skin glue processing were investigated and physical and chemical properties of the product were also determined. The yields of Alaska pollack, Thelagra calcogramma, skin and file fish, Novodon modestus, skin to the total body weight were $4.6\%\;and\;5.0\%$ respectively. The optimum conditions for a $49.3\%$n yield Alaska pollack skin glue processing were considered the extraction of previously tinted in $0.1\%$ calcium hydroxide solution for 3 hours with the additional water as much as 3 times of sample weight at $70^{\circ}C$ for 3 hours under the controlled pH 5.0. The conditions for file fish skin glue were similar to those of Alaska pollack except the addition of five times of water to the weight of sample skin needed for extraction. The content of crude protein of Alaska pollack and file fish skin glue were $98.0\%\;and\;96.0\%$ respectively. The contents of crude ash and crude lipid were not different from that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of Alaska pollack skin glue marked 5.84, $21.8^{\circ}C,\;7.1^{\circ}C\;and\;10.0g$ respectively and those of file fish skin glue showed $5.79,\;25.0^{\circ}C,\;7.4^{\circ}C\;and\;11.6g$ respectively.The color and turbidity of Alaska pollack skin glue are slightly superior to those of file fish skin glue. It is supposed that the extract residue of skin glue is valuable for use the animal feeds by the results of amino acid composition. And the ratio of each amino acid content to the total amino acid of Alaska pollack and file fish skin glue is similar to that of chemical grade gelatin.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.51-58
• /
• 2004

This study was performed to investigate compositions of inorganic elements, amino acids and glycoprotein fractions as biological substances in fruit body of Sarcodon aspratus. The fruit body of Sarcodon aspratus contained Ca, Mg, Zn, Mn, Fe, Cu, and Pb, in particular high Ca and Na. Hot water extracts consisted of 54% of polysaccharide fraction and 32.6% of protein. In amino acids composition, fourteen free amino acids were detected, mainly glutamic acid, alanine and arginine. Fifteen kinds of total amino acids were contained with major components of glutamic acid, aspartic acid, serine and threonine. Concerned to glycoprotein extraction, 95% ethyl alcohol concentration gave the highest yields with 70.6% sugar fraction, 332% glycoprotein. Different ethyl alcohol concentration resulted in different protein precipitations, and lower concentration ethyl alcohol in the range of 30 to 70% gave more than 92% of higher sugar fraction. Crude glycoprotein (GP) was fractionated by P fraction of more than MW 300,000, P-1 fraction unadsorbed by DEAE-Sephadex, P-2 fractionated from P-1 by Sepharose 2B gel chromatography and P-3 fraction adsorbed by DEAE-Sephadex. Total sugars were increased and protein contents decreased during fractionation. GP and P-3 contained glucose, galactose, mannose and fucose. GP had high glucose with high contents of glutamic acid, serine, alanine and glycine. P-3 fraction contained high mannose with aspartic acid, glutamic acid, and glycine. P-2 fraction was 700,000 MW with high glucose and fucose, and low protein of 1.1%, high amounts of aspartic acid, glutamic acid and alanine, but no mannose and no cysteine.

• Microbiology and Biotechnology Letters
• /
• v.36 no.2
• /
• pp.135-141
• /
• 2008

Immunomodulating effect of Salicornia herbacea extract on the mouse splenocytes was investigated. Crude S. herbacea polysaccharide extract (CSP) and other kinds of fine S. herbacea polysaccharides (SPI and SPII) were prepared from S. herbacea by hot water extraction and further ultrafiltration and gel filtration chromatography. In vitro experiment, the mouse splenocytes and separated T cells were treated with CSP, SPI or SPII (0.5, 1, 2, 4 mg/ml). In vivo experiment, three different S. herbacea extracts were orally administrated everyday for one week. For the basic data, body weight and physiological parameters such as organ weight and spleen index were observed. The proliferation of the cells was used as an index for immunemodulating activity and the effect of proliferation was evaluated using MTS assay. The CSP, SPI and SPII directly induced the proliferation of splenocytes and separated T cells in a dose-dependent manner. In results, the proliferation was more increased in the SPI and SPII treated cells than in the CSP treated cells. The best proliferation was shown in the splenocytes cultured with SPI at the concentration of 4 mg/ml for 24 hr. The proliferation of splenocytes and separated T-cells was higher (3.2 and 3.5 times, respectively) than the control. Moreover, when the mouse splenocytes were treated with mitogen, the efficient proliferation was shown in the splenocytes cultured with SPI. In conclusion, polysaccharides from S. herbacea showed a substantial immunomodulating activity in the mouse immune cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1936-1942
• /
• 2010

To examine the effect of overdosed functional food in liver-injured patients, we tried to investigate the dose effect of Allium sativum L. (also called garlic) extract on rats with CCl4-induced liver damage, by comparatively examinating the hepatic function of each group. 42 male Sprague-Dawley rats were selected and divided equally (n=7) into normal, control, positive control, and three experimental subgroups (E1, E2 and E3), respectively. For each kg of body weight, hepatic injury was induced by intraperitoneal administration of $0.5\;m{\ell}$ (0.20 g/kg/day) $CCl_4$, which was diluted in equal amount of olive oil, once a day on every other day for total 5 times. Hot water extraction was performed using domestically cultivated organic garlics, and the obtained extract was injected by sonde, once daily during 4 weeks, to each experimental subgroups by different dosage of 0.35 g/kg(E1), 0.70 g/kg(E2), 1.40 g/kg(E3), respectively. Results showed that the injection of garlic extract positively influenced the physiological activation which lowered the oxidative stress, changed the toxicity, and functionally improved the hepatic condition. Comparing the dose effect between the three experimental subgroups (E1, E2, E3), results of the maximal-dosed subgroup (E3) showed less significance compared with the lower-dosed subgroups(E1 and E2), which seems to resulted from the (increased) toxicity of garlic.

• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.221-233
• /
• 2000

An intertidal topography is continuously changed due to morphodynamics processes. Detection and measurement of topographic change for a tidal flat is important to make an integrated coastal area management plan as well as to carry out sedimentologic study. The objective of this study is to generate intertidal DEM using leveling data and waterlines extracted from optical and microwave remotely sensed data in a relatively short period. Waterline is defined as the border line between exposed tidal flat and water body. The contour of the terrain height in tidal flat is equivalent to the waterline. One can utilize satellite images to generate intertidal DEM over large areas. Extraction of the waterline in a SAR image is a difficult task to perform partly because of the presence of speckle and partly because of similarity between the signal returned from the sea surface and that from the exposed tidal flat surface or land. Waterlines in SAR intensity and coherence map can effectively be extracted with MSP-RoA edge detector. From multiple images obtained over a range of tide elevation, it is possible to build up a set of heighted waterline within intertidal zone, and then a gridded DEM can be interpolated. We have tested the proposed method over the Gomso Bay, and succeeded in generating intertidal DEM with relatively high accuracy.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.189-195
• /
• 1978

Using the skins of conger eel, Astroconger myriaster, and hagfish, Eptatretus burzeri, from fillet manufactory, the optimum conditions of skin glue processing were investigated and physical ana chemical properties of the product were also determined. The yields of conger eel and hagfish skin to the total body weight were $10.6\%$ and $11.4\%$, respectively. The optimum processing conditions for conger eel skin glue were the extraction of skins which were previously tinted with $0.3\%$ calcium hydroxide solution for one hour, in water at pH 5.5 and $60^{\circ}C$ for four hours. The additional water was six times sample weight. In case of the hagfish skin glue, the liming time with $0.3\%$ calcium hydroxide solution was suitable for three hours, and the skins were extracted with water as much as nine times sample weight at pH 5.0 and $60^{\circ}C$ for three hours. The contents of crude protein of conger eel and hagfish skin glue were $91.5\%$ and $90.2\%$, respectively. The content of crude lipid was slightly higher than that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of conger eel skin glue were 13.6, $15.2^{\circ}C$, $6.2^{\circ}C$ and 13.0g respectively and those of hagfish skin glue were 12.9, $14.8^{\circ}C$, $4.3^{\circ}C$ and 23.3g respectively. The turbidity of conger eel skin glue and hagfish skin glue were slightly superior to those of dry glue.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1145-1151
• /
• 2009

This study was performed to investigate the effects of Sineui-Dae (Sasa coreana Nakai, a kind of bamboo) extracts on the improvement of serum lipid composition by using rats fed a hypercholesterol diet for 4 weeks. The experiment animals were administered with the following diets; high cholesterol diet group (HC diet) as a control and three supplemented groups with high cholesterol diets (HCW, HCM or HCH diet). Three kinds of extracts were prepared by orderly extraction with hexane, methanol, and water. We measured free cholesterol, cholesteryl ester, total cholesterol LDL- and HDL-cholesterol triglyceride and phospholipid in the serum of rats in three experimental and control groups. There were no significant differences in body weights and feed intakes between the HC control group and the extract supplemented groups. The levels of total cholesterol and LDL-cholesterol in the serum of extract supplemented groups were lower than that of the group fed with HC diet only. Serum HDL-cholesterol levet which is known as an antiatherosclerosis factor, was higher in all groups supplemented with bamboo extract by 17.2-21.9% compared to the HC control group. All groups supplemented with bamboo extracts showed the lowering effect of atherogenic index compared to the HC control group (HC group: 2.96${\pm}$0.08, HCM group: 1.48${\pm}$0.02, HCW group: 1.69${\pm}$0.04, HCH group: 1.84${\pm}$0.01). Furthermore, serum triglyceride and phospholipid decreased significantly in the HCM diet compared to the HC control diet. These results suggest that Sineui-Dae bamboo extract, especially methanol extract, has improving effects on hyperlipidemia of rats fed a high cholesterol diet.