• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.71-82
• /
• 1996

This study has been undertaken to evaluate hydrophobic cyclodextrin(CD) derivatives as a sustained release carrier of azidothymidine(AZT), AZT, which has potent activity against AIDS and AIDS-related complex as thymidine analogue, has been reported that it has significant toxicity and short half life. Therefore, it is necessary to design sustained release oral dosage form to avoid undesirable side effects attributable to an excessive plasma concentration and to reduce the frequency of administration of AZT. Inclusion complexes of AZT with $acetyl-{\beta}-cyclodextrin\;(AC{\beta}CD)$ and $triacetyl-{\beta}-cyclodextrin(TA{\beta}CD)$ were prepared by solvent evaporation method. Interactions of AZT with CD were investigated by Differential Scanning Calorimetry(DSC) and Infrared Spectrophotometry(IR). The decreasing order of water solubilities of AZT and AZT-CD inclusion complexes were as follows; $AZT\;(27.873{\pm}0.015,mg/ml)\;>\;AZT-AC{\beta}CD\;(3.377{\pm}0.003)\;>\;AZT-TA{\beta}CD\;(2.528{\pm}0.001)$. Partition coefficients of $AZT-AC{\beta}CD\;and;\AZT-TA{\beta}CD$ inclusion complexes were increased by 1.27-fold, 1.54-fold in pH 1.2 and 1.32-fold, 1.47-fold in pH 6.8 in comparison with that of AZT. The mean dissolution time (MDT, min) which represents the rapidity of dissolution rate of AZT, $AZT-AC{\beta}CD,\;AZT-TA{\beta}CD$ were 5.12, 14.02 and 19.38 min in pH 1.2 and 2.52, 15.19 and 18.19 min in pH 6.8. AZT was very rapidly and completely dissolved in pH 1.2 and pH 6.8 within 5 minutes. But AZT-CD inclusion complexes showed the sustained release pattern in comparison with AZT alone. The simultaneous in situ nasal and jejunal recirculation study to compare the intrinsic absorptivity and the property of absorption sites revealed that the absorption of $AZT-TA{\beta}CD\;(N:35.35{\pm}1.08%,\;J:27.47{\pm}1.18%)$ was more than that of $AZT\;(N:16.89{\pm}2.25%,\;J:15.86{\pm}2.33%)$. The above results suggest that $TA{\beta}CD$ which is a hydrophobic cyclodextrin may serve as sustained release carrier with absorption enhancing effect.

• Applied Biological Chemistry
• /
• v.37 no.3
• /
• pp.154-160
• /
• 1994

Pregelitinized rice (PR), pregelitinized waxy rice (PWR), and pregelitinized rice flour (PRF) were evaluated for physico-chemical properties comparing with rice starch and acetylated potato starch. L value was decreased during drum drying. PFR had the highest value (P<0.05) for water absorption index and PWR had the highest value for water solubility index. Transmittance of gelitinized samples had drastically increased at $80{\sim}90^{\circ}C$. PWR had the highest value for apparent viscosity and rice samples had a steady apparent viscosity during heating at $90^{\circ}C$. Viscosity was decreased as pH decreased at room temperature and drastically decreased below pH 2. Rice starch and PR had no significant effect for change of pH. Change of viscosity had more effect for hot temp. than room temp.. Pregelitinized samples showed only second peak for DSC. PWR had the lowest value for degree of retrogradation and acetylated potato starch had the highest value for freeze-thaw-stability.

• Korean journal of food and cookery science
• /
• v.32 no.5
• /
• pp.559-566
• /
• 2016

Purpose: This study was to investigate the quality characteristics of wet noodle added with radish juice containing with pulp. Methods: Wet noodles were prepared with different amounts of radish juice (0%, 20%, 40%, 60%, 80%, 100%, w/w) instead of water. Results: As the amount of radish juice was increased, water absorption, volume increasing rate, and turbidity of soup were decreased. Lightness (L) values of uncooked wet noodles and cooked noodles were decreased with the addition of radish juice, while redness (a) and yellowness (b) values had no tendency of increasing or decreasing, regardless of the amount of radish juice. Moreover, lightness, redness, and yellowness values of uncooked noodles were higher than those of cooked noodles. The texture of cooked noodles showed significant differences in hardness and chewiness. It was increased as the amount of radish juice was increased. Their adhesiveness and springiness were lower than those of the control. Appearance, texture, and overall acceptability of sensory evaluation revealed that the noodle added with 80% of radish juice had the highest scores, although there were no differences among noodles added with different amounts of radish juice. Conclusion: In summary, the most desirable blending ratio of radish juice and water for the kneading of wet noodles was 80:20.

• Korean Journal of Materials Research
• /
• v.32 no.3
• /
• pp.115-124
• /
• 2022

Porous basalt aggregate is commonly used in roadbed engineering, but its application in concrete has rarely been studied. This paper studies the application of porous basalt in concrete. Porous basalt aggregate is assessed for its effects on mechanical strength and durability of prepared C50 concrete; because it has a hole structure, porous basalt aggregate is known for its porosity, and porous basalt aggregates can be made full of water through changing the content of saturated basalt; after full-water condition is achieved in porous basalt aggregate mixture of C50 concrete, we discuss its mechanical properties and durability. The effects of C50 concrete prepared with basalt aggregate on the compressive strength, water absorption, and electric flux of concrete specimens of different ages were studied through experiments, and the effects of different replacement rates of saturated porous basalt aggregate on the properties of concrete were also studied. The results show that porous basalt aggregate can be prepared as C50 concrete. For early saturated porous basalt aggregate concrete, its compressive strength decreases with the increase of the replacement rate of saturated aggregate; this occurs up to concrete curing at 28 d, when the replacement rate of saturated basalt aggregate is greater than or equal to 40 %. The compressive strength of concrete increases with the increase of the replacement rate of saturated aggregate. The 28 d electric flux decreases with the increase of the replacement rate of saturated aggregate, indicating that saturated porous basalt aggregate can improve the chloride ion permeability resistance of concrete in later stages.

• Advances in Traditional Medicine
• /
• v.7 no.1
• /
• pp.51-64
• /
• 2007

Mucus is an aqueous gel complex with a constitution of about 95% water, high molecular weight glycoprotein (mucin), lipid, salts etc. Mucus appears to represent a significant barrier to the absorption of some compounds. Natural mucoadhesive agent was isolated and purified from the aqueous extract of the seeds of prosopis pallida (PP). Formulated tablet with the isolated material by wet granulation method. Some natural edible substances are in consideration for candidates as mucoadhesive agents to claim more effective controlled drug delivery as an alternative to the currently used synthetic mucoadhesive polymers. Subjected the materials obtained from natural source i.e. PP and standard synthetic substance, sodium carboxymethyl cellulose for evaluation of mucoadhesive property by various in vitro and in vivo methods. Through standard dissolution test and a model developed with rabbit, evaluated in vitro controlled release and bioadhesive property of theophylline formulation. Mucoadhesive agent obtained from PP showed good mucoadhesive potential in the demonstrated in vitro and in viνo models. The results suggest that the mucoadhesive agent showed controlled release properties by their application, substantially. In order to assess the gastrointestinal transit time in vivo, a radio opaque X-ray study performed in healthy rabbit testing the same controlled release formulation with and without bioadhesive polymer. Plasma levels of theophylline determined by the HPLC method and those allowed correlations to the in vitro mucoadhesive study results. Better correlation found between the results in different models. PP may acts as a better natural mucoadhesive agent in the extended drug delivery system.

• Preventive Nutrition and Food Science
• /
• v.17 no.3
• /
• pp.197-202
• /
• 2012

Normal (cv. Keumkang, KK) and waxy-type (cv. Shinmichal, SMC) whole wheat flour was substituted at 20 and 40% for white wheat flour (WF) during bread dough formulation. The flour blends were subjected to dough and baking property measurement in terms of particle size distribution, dough mixing, bread loaf volume and crumb firmness. The particle size of white wheat flour was the finest, with increasing coarseness as the level of whole wheat flour increased. Substitution of whole wheat flour decreased pasting viscosity, showing all RVA parameters were the lowest in SMC40 composite flour. Water absorption was slightly higher with 40% whole wheat flour regardless of whether the wheat was normal or waxy. An increased mixing time was observed when higher levels of KK flour were substituted, but the opposite reaction occurred when SMC flour was substituted at the same levels. Bread loaf volume was lower in breads containing a whole wheat flour substitution compared to bread containing only white wheat flour. No significant difference in bread loaf volume was observed between normal and waxy whole flour, but the bread crumb firmness was significantly lower in breads containing waxy flour. The results of these studies indicate that up to 40% whole wheat flour substitution could be considered a practical option with respect to functional qualities. Also, replacing waxy whole flour has a positive effect on bread formulation over normal whole wheat flour in terms of improving softness and glutinous texture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11b
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.665-671
• /
• 2008

The principal objective of this study was to assess the quality properties of noodles to which browned oak mushroom (Lentinus edodes) paste was added at concentrations of 10%, 20%, and 30% to wheat flour, respectively. With regard to the cooking properties of the noodles, the weight and water absorption of the cooked noodles increased with increasing paste contents, but the turbidity of the noodle soups decreased (p<0.05). The hardness and gumminess of the uncooked and cooked noodles decreased significantly in proportion to the quantity of added paste, except in the case of the cooked noodles with 30% paste. The springiness and cohesiveness of both noodles with Lentinus edodes paste were significantly higher than in the controls. The lightness of the uncooked and cooked noodles decreased in accordance with the amount of added paste. However, the yellowness of both noodles was significantly increased. Moreover, the results of our sensory evaluation showed that the cooked noodles with 20% and 30% added Lentinus edodes paste had higher values. Thus, Lentinus edodes paste added to a concentration of up to 30% was shown to effectively improve the quality of noodles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.3
• /
• pp.328-333
• /
• 1993

The effect of defatted and dehydrated beef muscle on the physical properties of thermoplastically extruded defatted soybean, cottonseed, peanut and sunflower seed flours were investigated. To minimize the adverse effect of meat fat and to increase the mixing efficiency of the meat with defatted oilseed flours at a given moisture level, beef muscle was extracted with chloroform-ethanol(2 : 1) at 2$0^{\circ}C$ and air dried. The variety of oilseed flours used had greater effects on color, expansion, bulk density, water absorption rate and textural strength of the extrudate than did the added level of defatted, dehydrated beef muscle (0 to 20% on a dry weight basis).

• Journal of Pharmaceutical Investigation
• /
• v.37 no.2
• /
• pp.85-94
• /
• 2007

The objective of this study is to prepare a stable delivery systems containing polyethoxylated retinamide(PERA) - derivatives of retinoic acid, effective anti-wrinkle and anti-acne agent. Cubic liquid crystalline phase gel (CLCPG) and cubosomes containing various concentrations of PERA were prepared to investigate the physicochemical properties. Furthermore, stability and transdermal absorption efficacy of the CLCPG containing PERA were investigated in comparison with oil-in-water (O/W) emulsions which are predominantly used as a topical formulation. CLCPG increase the stability of PERA in comparison with O/W emulsion. For tropical application, CLCPG containing PERA shows higher moisturizing effect than that of O/W emulsion. In skin permeation test, CLCPG shows higher PERA deposit on epidermis. With its specific physicochemical property caused by the glyceryl oleate, CLCPG itself could be used for stabilizer of various actives and applied as an effective delivery system for topical application. Cubosome, nano-sized dispersed CLCPG, is also expected to be applied in a various field of industry like food, cosmetics and pharmaceuticals.