• 제목/요약/키워드: water absorptance

검색결과 14건 처리시간 0.02초

태양 선택흡수막의 특성 분석 (Property Analysis of Solar Selective Coatings)

  • 이길동
    • 한국태양에너지학회 논문집
    • /
    • 제33권4호
    • /
    • pp.31-38
    • /
    • 2013
  • The chemical composition of the black Cr solar selective coatings electrodeposited were investigated for property analysis by using a XPS(X-ray photoelectron spectroscopy) before and after annealing in air at $300^{\circ}C{\sim}500^{\circ}C$ for 120 hours. Black Cr selective coating exposed by solar radiation for 5 months was compared with annealed sample. In addition, The Cu solar selective coatings were prepared by thermal oxidation method for low temperature application. The samples obtained were characterized by using the optical reflectance measurements by using a spectrometer. Optical properties of oxidized Cu solar coatings were solar absorptance $({\alpha}){\simeq}0.62$ and thermal emittance $({\epsilon}){\simeq}0.41(100^{\circ}C)$. In the as-prepared Cr black selective coating, the surface of the coating was found to have Cr hydroxide and Cr. The Cr hydroxide of the major component was converted to $Cr_2O_3$ or $CrO_3$ form after annealing at $500^{\circ}C$ with the desorption of water molecules. The black Cr selective coating was degraded significantly at temperature of $500^{\circ}C$. The main optical degradation modes of this coating were diffusion of Cu substrate materials.

점토바닥벽돌의 품질 및 시공기준 연구 (A Study on the Construction Specification and Quality Assurance Criteria in Clay Paver)

  • 박대근;이상염;김균태
    • 한국건설관리학회논문집
    • /
    • 제11권6호
    • /
    • pp.111-121
    • /
    • 2010
  • 최근 들어 도심지 보도 또는 아파트 단지내 도로 등에 시공되는 보도블록에 대한 소비자의 눈높이가 높아짐에 따라 과거에는 콘크리트 블록 일색이었던 보도포장 재료가 점토바닥벽돌, 천연석 또는 나무 등으로 다양화 고급화되고 있다. 그 중 특히 사람에게 친환경 친인간적인 점토바닥벽돌의 판매량은 해마다 두 자리수 이상의 성장률을 보일만큼 수요자가 다양하고 많아지고 있으나 시공 후 단시간 내에 '모서리 깨짐', '동결 파손', '휨파괴' 및 '줄눈 벌어짐' 등의 파손이 빈번하게 발생되고 있어 내구성 문제가 지적되고 있다. 점토바닥벽돌은 요업제품의 특성상 벽돌끼리 부딪힐 경우에는 쉽게 깨지는 특성을 가지고 있으며, 물을 쉽게 흡수하는 성질이 있어 동결로 인한 부피 팽창 파손에 비교적 취약할 뿐만 아니라 생산설비와 공정관리 등 생산과정의 미세한 차이에 따라 제품의 강도 또는 흡수율 등 물성에 대한 편차가 크게 발생한다. 그리하여 엄격한 품질관리 기준에 따라 생산과 시공을 하지 않을 경우, 제품에 하자가 발생하여 유지보수에 많은 비용이 소요된다. 본 연구에서는 점토바닥벽돌 포장에서 흔히 발생하는 파손 증상을 유형별로 분류하여 원인을 분석하였으며, 필요시 압축 강도 및 흡수율 시험 등을 통하여 벽돌의 생산, 시공 및 품질관리 기준 등 광범위한 부분에 걸쳐 해결방안을 제시하였다.

기상의 $NH_3$를 침전체로 사용하는 $BaTiO_{3}$ 분말의 합성 (The synthesis of $NH_3$ powder using gaseous $NH_3$ as precipitator)

  • 현성호;김정환;허윤행
    • 환경위생공학
    • /
    • 제12권1호
    • /
    • pp.25-37
    • /
    • 1997
  • The synthesis of high purity and ultra-fine $BaTiO_{3}$ by precipitation with gaseous $NH_{3}$ as precipitator was investigated to find an alternative process to solve various problems of present wet methods. This study consisted of two parts ; synthesis of $BaTiO_{3}$ precipitation with gaseous $NH_{3}$ and test of electrical property for the $La_{2}O_{3}$ doped $BaTiO_{3}$. The proper condition for the synthesis of $BaTiO_{3}$ by precipitation with gaseous $NH_{3}$ is as follows. The pH was 9.0. $H_{2}O_{2}$ mole ratio to $TiCl_{4}$ was 10. $NH_{3}$ gas follow rate did not influence the synthesis of $BaTiO_{3}$. The calcination temperature of $BaTiO_{3}$ was $300^{\circ}C$. Also, the synthesis of $La_{2}O_{3}$-doped $BaTiO_{3}$ was tested through the wet process. Under these condition, the shape of prepared $BaTiO_{3}$ powder was spherical type and the size of that was about $0.2{\mu}m$. After the powder was pressed, this green body was sintered at the $1300^{\circ}C$. Under these conditions, the water absorptance and the density of the obtained sintered body were below 0.04 %, 5.2 g/$cm^{3}$, respectively. Also the grain size of that was about $10{\mu}m$ and it was similar to commercial product.

  • PDF

에어러솔 대기에서 단파 영역에서의 복사전달모델들의 상호비교 (Intercomparison of Shortwave Radiative Transfer Models for Aerosol-laden Atmospheres)

  • 유정문;정명재;이규태;김준;이주은;허영민;김보미;이윤곤;이재화;윤종민;이원학
    • 한국지구과학회지
    • /
    • 제29권2호
    • /
    • pp.128-139
    • /
    • 2008
  • 본 연구에서는 에어러솔 대기 상태에서 국내 COMS 연구자들이 사용하는 세 개의 단파 복사전달모델에서 산출된 복사속 성분을 비교분석하였으며, 대기 복사 수지에서 에어러솔 역할도 분석하였다. 국내 모델들의 평가를 위하여, 15개 모델값을 평균한 Halthore et al.(2005) 결과를 기준값으로 사용하였다. 두 종류 에어러솔 농도(AOT=0.08, 0.24)에서 조사된 열대 또는 한대 대기의 에어러솔 강제력은 지표에서의 하향 일사 및 상향 산란, 대기 상부의 상향 산란, 그리고 대기 흡수도의 복사 성분들에 있어서 국외 연구에 비하여 국내 결과들에서 체계적으로 약하게 나타났다. 에어러솔 강제력은 지표에서의 하향 일사에 대하여 $-10{\sim}-40Wm^{-2}$ 이었으며, 지표 및 대기 상부의 상향 산란의 경우에 상대적으로 큰 태양천정각과 고농도 에어러솔 상태에서 컸다. 두 종류 에어러솔 조건에서 지표에서의 하향 및 상향 산란값들은 대기 종류보다는 태양천정각에 더 민감하였다. 하향 산란은 상대적으로 작은 태양천정각과 고농도 에어러솔 조건에서 컸다. 에어러솔 농도 증가는 하향 산란 증가에도 불구하고 하향 직달 일사의 감소가 이를 초과함으로써 지표 냉각을 유도하는 것으로 조사되었다. 동일한 에어러솔 농도 및 태양천정각 조건에서 직달일사 소산은 열대 대기에서는 주로 수증기, 그리고 한대 대기에서는 수증기뿐만 아니라 오존에도 기인하는 것으로 조사되었다. 특히 열대 대기에서는 수증기의 역할이 오존에 비하여 $3{\sim}4$배 컸다. 저농도 및 고농도 에어러솔 대기에서 대기 흡수도는 국내외 연구간에 ${\pm}10%$ 내에서 일치하였다.