• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.37-47
• /
• 2004

Sulfates such as alunite and schwertmannite formed under oxidation condition play a important role in geochemical processes taken place at waste dumps and a creek from Dalseong mine, Daegu. Water chemistry shows pH decreases from upstream toward downstream creek, mainly due to formation of schwertmannite that is the most abundant phase along the creek. The removal of Al from the creek is preferentially attributed to formation of Al-bearing minerals and Al-sulphates. Among them, alunite is the most important Al-sink phase that occurs at higher pH than $pK_1$, Al hydrolysis constant. With high saturation index, alunite formed at the creek has a spherical form, commonly associated with schwertmannite. Secondary minerals formed on the surface of altered or weathered surfaces of heavy metals from the wasted dump that underwent severe oxidation, where alunite has characteristic habits which are spheric, radiating, and botrytis-like aggregates. Natroalunite occurs in association with alunite, or as mixtures of both of them. Because the pH decreases with distance due to formation of schwertmannite, although total contents of dissolved ions slowly lessen at least in the AMD, it is expected that the minerals precipitated at the creek can be exposed to subsequent dissolution, which may induce possible environmental problems.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.83-92
• /
• 1999

Chitosan was prepared from chitin which was abstracted from wasted crab shells. Then itaconic acid was graft-copolymerized onto chitosan using ceric ammonium nitrate as a reaction initiator. To investigate the optimal grafting conditions, the influences of several factors on the grafting were studied, i. e., the concentrations of CAN and itaconic acid, the reaction temperature and time. And to find out its flocculation ability. the flocculation test was carried out with a metal plating factory waste water. The state of graft-copolymer was identified through IR spectra analysis. The optimal grafting conditions and flocculation results were shown to be : concentration of ceric ammonium nitrate is $3.5{\times}10^3M$, reaction temperature is $40^{\circ}C$ and reaction time is 4hrs with 0.25M of the monomer(itaconic acid). Though flocculation tests using chitosan, grafted chitosan and cation, CODcr. metal ions removal rates were measured. The order of superiority is Itaconic acid grafted chitosan>Chitosan>Cationic polymer.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.33-40
• /
• 2018

Currently, in South Korea, because of reducing the construction period or treating wasted water, there are some cases of missing wet curing for concrete structure even though for high strength concrete. This air curing conditions is considered to cause increased possibility of compressive strength decrease, and increasing drying or autogenous shrinkages. As a solution of shrinkage of concrete, The authors' research team conducted the research on improving durability of concrete with decreasing autogenous shrinkage by adding the oil or fat to induce the saponification. Therefore, in this research, the influence of curing method on compressive strength, shrinkage on evaporation rate of high strength mortar including high volume supplementary cementitious materials (SCMs) was evaluated depending on various curing methods such as air curing, drying after painting emulsified refined cooking oil (ERCO), and drying after 7 and 28 days' wet curing. The experimental result showed the air curing method caused approximately 50% of decreased compressive strength and 1.9 times of increased shrinkage rather than the 28-day-wet curing method, thus it was known that the wet curing significantly influences on performance of high strength mortar using high volume SCMs. However, the ERCO painting curing caused decreased performance of concrete rather than drying after 7 days curing while it caused improved performance of concrete than entire period air curing.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.73-82
• /
• 2011

Coal ash of industial by-products was not recycled about 30% in total emissions. Moreover, it caused environmental pollution as well as wasted unnecessary expenses and time. Currently, fly ash(FA) is recycled as construction material however ponded ash(PA) is mostly buried. Lightweight foamed Controlled Low-Strength Materials(CLSM) evaluated in this study reduces unit weight by mixing foam in the traditional Controlled Low-Strength Material and has lightweight and flowability to be available for backfill materials in construction. Flow test, unconfined compressive strength test, and foamed-slurry unit weight test were performed in this study and the applicability of lightweight foamed CLSM for construction materials was evaluated. The results indicate that the mixture ratio(PA:FA) ranging from 70:30 to 50:50, cement of 7%, foam of 2~3%, and water content of 26.5~29.5% were required to satisfy the following standards such as flow value(i.e., 20cm), unconfined compressive strength(i.e., 0.8~1.2MPa), and foamed-slurry unit weight(i.e., $12{\sim}15kN/m^3$).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.81-87
• /
• 2021

Many merchant ships sail in the waters surrounding Jeju Island and many fishing vessels catch fish using gill nets, trolling lines, and so on. Meanwhile, marine waste has collected in the coastal waters of Jeju Island. However, there has been little research on the collection of marine waste in coastal waters. In this study, marine waste deposited in Jeju Island's northwest sea was collected using Jeju National University's training ship, and related vessels were analyzed for each gear type. According to the results, most coastal waters had abandoned fishing grounds, which were from fishing vessels, and a large proportion of them was gill net and trap fishing gear. To analyze how much marine waste is accumulating in a certain area and ship's stay time, we use automatic identification system (AIS) data to extract the time spent in the target sea, and the amount of marine waste per hour was analyzed in a unit distance of 1 ㎢. The average amount of marine waste generated per hour in the unit area was found to be 0.94 kg for gillnet fishing gear, 3.49 kg for trap fishing gear, 0.10 kg for trawl fishing gear, 0.11 kg for longline fishing gear, and 0.02 kg for other fishing gear.

• The Journal of Korean Society for School & Community Health Education
• /
• v.3
• /
• pp.59-78
• /
• 2002

The purpose of this study was based on students in high school to find out how interest eating and controlling weight on normal time by sex to let them get a better sense's of view on weight controlling so they can get healthy, and healthy school life and concentrate on studying, As a result of analyzing the data collected for the subject of high school students, the conclusions were as follows; First, out of 325 students, 44.6% were male students, and 179 were female students, Compared to the BMI, normal mass were 50.8%, which were 165 students, less weighted were 39.7%, which were 129 students, and over weighted were 9.5%, which were 31 student. Also average height for male students were 173.8 cm, for female students were 161.5 cm, average weight were 67.2 kg for male students, and for female students were 53.2kg. Using BMI analysing the results and the male students had an average of 22.2%, and the female students had an average of 20.3%, so male students were a little higher than the female students. Second, the interest rate for weight control were 82.2%, that's 267 students for, 'interested' and 7.8%, which were 58 student for 'not interested', so most students were interested, in controlling weight. Interest rate were 83.6% for male students, 81.0% were female students. BMI told that group of less weighted were 82.9%, group of normal were 79.4% and group of over weighted were 93.5%. The rate were all high not relating to BMI. Third, compared to the past, more people said 'normal'(41.3%), people who said 'a little fat'(36.3%) decreased, but they still think they are fat even though they are not, also when they are less weighted they still think they are fat. Fourth, for 'weight control, and food' both male and female said they were related, and for 'weight control and exercising' they also said they were related, but more male said that they were related, However for relations between' controlling weight and school's physical education class' the answers were usually disagree. Fifth, for the 'satisfaction of their present weight', both BMI and the students answered and this results were mostly same as the past result, so most students prefer to lose weight. Also, both male and female think that the reason they have this weight now is, because of 'the amount of exercises' and 'the amount of food they eat', so they find that it's related to each other. Sixth, for the experience on weight control, both male and female had experiences, and they answered 'exercising and food treatment' is the good way to control weight. Also for 'the reason they started to control there weight', both male and female answered, 'they thought there weight were not normal'. Seventh, 'Do you pick on food to control weight?' and 'Do you feel nervous before you eat?' and for last 'control of drinking water' the answer was all different, and both male and female answered negatively. Eighth, time wasted on exercising per day, for less than 30 minute were 81.5%, the form of exercises that students did were 'not much or walking on the way to school and way to home'. Usually for their free time, male students spend on exercising however female student did not. Also both female and male students showed that they like to exercise, but majority of female student disliked to exercise. To everyone's point of view 'like'(32.9%), 'like a lot'(20.9%), so everyone agrees. The knowledge information on controlling weight, they answered, usually found from commercials, newspaper or magazines and from parents or friend. From the past many high school students wanted to control their weight, so there should had been a good education on this, however there wasn't any of those education and still it doesn't exist. Also most school's education are arranged to entrance pressure so they have a lot of knowledge and informations to it, but for real they don't have any activity or actions on it. Through this research, we felt that, we should correct students with wrong understanding on controlling weight and wrong knowledge. Also we suggest to make an activity program for this.

• Journal of Korean Society of Forest Science
• /
• v.33 no.1
• /
• pp.33-58
• /
• 1977

A bark comprises about 10 to 20 percents of a typical log by volume, and is generally considered as an unwanted residue rather than a potentially valuable resourses. As the world has been confronted with decreasing forest resources, natural resources pressure dictate that a bark should be a raw material instead of a waste. The utilization of the largely wasted bark of genus Pinus, Quercus, and Populus grown in Korea can be enhanced by learning its physical and mechanical properties. However, the study of tree bark grown in Korea have never been undertaken. In the present paper, an investigative study is carried out on the bark of three genus, eleven species representing not only the major bark trees but major species currently grown in Korea. For each species 20 trees were selected, at Suweon and Kwang-neung areas, on the same basis of the diameter class at the proper harvesting age. One $200cm^2$ segment of bark was obtained from each tree at brest height. Physical properties of bark studied are: bark density, moisture content of green bark (inner-, outer-, and total-bark), fiber saturation point, hysteresis loop, shrinkage, water absorption, specific heat, heat of wetting, thermal conductivity, thermal diffusivity, heat of combustion, and differential thermal analysis. The mechanical properties are studied on bending and compression strength (radial, longitudinal, and tangential). The results may be summarized as follows: 1. The oven-dry specific gravities differ between wood and bark, further more even for a given bark sample, the difference is obersved between inner and outer bark. 2. The oven-dry specific gravity of bark is higher than that of wood. This fact is attributed to the anatomical structure whose characters are manifested by higher content of sieve fiber and sclereids. 3. Except Pinus koraiensis, the oven-dry specific gravity of inner bark is higher than that of outer bark, which results from higher shrinkage of inner bark. 4. The moisture content of bark increases with direct proportion to the composition ratio of sieve components and decreases with higher percent of sclerenchyma and periderm tissues. 5. The possibility of determining fiber saturation point is suggested by the measuring the heat of wetting. With the proposed method, the fiber saturation point of Pinus densiflora lies between 26 and 28%, that of Quercus accutissima ranges from 24 to 28%. These results need be further examined by other methods. 6. Contrary to the behavior of wood, the bark shrinkage is the highest in radial direction and the lowest in longitudinal direction. Quercus serrata and Q. variabilis do not fall in this category. 7. Bark shows the same specific heat as wood, but the heat of wetting of bark is higher than that of wood. In heat conductivity, bark is lower than wood. From the measures of oven-dry specific gravity (${\rho}d$) and moisture fraction specific gravity (${\rho}m$) is devised the following regression equation upon which heat conductivity can be calculated. The calculated heat conductivity of bark is between $0.8{\times}10^{-4}$ and $1.6{\times}10^{-4}cal/cm-sec-deg$. $$K=4.631+11.408{\rho}d+7.628{\rho}m$$ 8. The bark heat diffusivity varies from $8.03{\times}10^{-4}$ to $4.46{\times}10^{-4}cm^2/sec$. From differential thermal analysis, wood shows a higher thermogram than bark under ignition point, but the tendency is reversed above ignition point. 9. The modulus of rupture for static bending strength of bark is proportional to the density of bark which in turn gives the following regression equation. M=243.78X-12.02 The compressive strength of bark is the highest in radial direction, contrary to the behavior of wood, and the compressive strength of longitudinal direction follows the tangential one in decreasing order.