• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.490-495
• /
• 2005

Since there are very limited numbers of thermophilic anaerobic digesters being operated, it is often difficult to start up a new one using sludge from an existing reactor as a seed. However, for obvious reasons it seems few attempts have been made to compare the start-up performance of thermophilic anaerobic digestion using different sources of seed sludges. The purpose of this study was to evaluate the start-up performance of anaerobic digestion using aerobic Waste Activated Sludge (WAS) from a plant and mesophilic Anaerobic Digested Sludge (ADS) as the seed source at both mesophilic ($35^{\circ}C$) and thermophilic ($55^{\circ}C$) temperatures. In this study, two experiments were conducted. First, thermophilic anaerobic reactors were seeded with WAS (VSS = 4,400 mg/L) and ADS (VSS = 14,500 mg/L) to investigate start-up performance with a feed of acetate as well as propionate. The results show that WAS started to produce $CH_4$ soon after acetate feeding without a lag time, while ADS had a lag time of 10 days. When the feed was changed to propionate, WAS removed propionate down to below the detection limit of 10 mg/L, while ADS removed little propionate and produced little $CH_4$. Second, in order to further compare the methanogenic activity of WAS and ADS, both mesophilic and thermophilic reactors were operated. WAS acclimated to anaerobic conditions shortly and after acclimating it produced more $CH_4$ than ADS. WAS at mesophilic temperature biodegraded acetate at the same rate as for thermophilic. However WAS at mesophilic temperature biodegraded propionate at a much faster rate than at thermophilic. WAS as the seed source of anaerobic digestion resulted in much better performance than ADS at both mesophilic and thermophilic temperatures for both acetate and propionate metabolism.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.66-76
• /
• 2008

Silicon wafer is used in making semiconductor device of various forms in the semiconductor industry. Silicon wafer is produced by cutting silicon ingot and sludge containing silicon results from cutting process. The amount of silicon sludge is increasing owing to the usage of semiconductor device in many industry sectors. These days the recycling technologies of the waste silicon sludge has been widely studied from view point of economy and efficiency. In this study, patents on the recycling technologies of the waste silicon sludge were analyzed. The range of search was limited in the open patents of USA, European Union, Japan, and Korea up to september, 2007. Patents were collected using key-words and filtered by filtering criteria. The trend of the patents was analyzed by the years, countries, companies, and technologies.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.302-309
• /
• 2020

This paper is a basic study for applying the dried recycled sludge of waste sludge generated in construction waste intermediate treatment facility and the crushed recycled glass aggregate of waste glass bottles that cannot be recycled to the recycled cold asphalt mixtures. This paper reviewed the characteristics of recycled cold asphalt mixtures using recycled sludge and recycled glass aggregate. As a result, as contents of recycled sludge and recycled glass aggregate increased, the Marshall stability, indirect tensile strength, and tensile strength ratio of the recycled cold asphalt mixtures decreased, but flow and void ratio of that increased.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.165-172
• /
• 2004

Co-incineration of coal and wastewater sludge was r;erfonn:rl in a O.lMWth bench scale circulating fluidized bed combustor(CFBC) Sludge was received from a wastewater treatment plant in a dye industrial complex in Busan. Metropolis. Moisture content of received sludge was 80%. Coal and sludge mixture was prepared with weight ratio of 90/10, 85/15 and 80/20. Co-combustion characteristics of the coal and sludge mixture demonstrated stable combustion conditions. Component analysis, incineration characteristics, boiler performance was measured before and after the test and application for commercial 59MWth CFBC boiler. The release of hazardous components such as $SO_2$ and Cl was suppressed by the presence of inherent minerals of Ca, Na, K in coal and sludge mixture. Pre-drying was not essential but it was recommended for the benefits of manageability of sludge.

• The Korean Journal of Ceramics
• /
• v.2 no.3
• /
• pp.125-130
• /
• 1996

Hematite iron ore and waste iron oxide sludge containing about 3-5 wt% $SiO_2$ were purified by three types of method developed on the basis of the Bayer process which is known as the purification process of bauxite ore. The basic principle of the developed methods lies in the fact that the impurities contained in the iron oxides, such as $SiO_2$ and $Al_2O_3$ are soluble in the alkaline reagents. Reaction of the raw materials with KOH was done in pressure vessel, at atmospheric pressure, and by both of these two. By the pressure vessel method $SiO_2$ content was reduced to below 0.5 wt% in the waste iron oxide sludge, while, in iron ore, $SiO_2$ remained at 2-3 wt%. The atmospheric pressure reaction rendered the waste iron oxide sludge $SiO_2$ content below 0.5wt% when the reaction temperature increased to above 90$0^{\circ}C$. The combined method of two previous methods was the most effective process and rendered the refined iron oxide about 300-400ppm of $SiO_2$. Using some refined iron oxides, Ba-ferrite was produced and magnetic properties were measured. The highest quality of magnetic properties obtained in this study were Br=2.09 G, bHc=1.99 KOe, iHc=4.54 KOe, $(BH)_{max}$=1.06 MGOe. Effect of sintering condition and chemical composition will be discussed.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.77-82
• /
• 1995

In order to investigate the purification effects of livestock waste water, Modified Activated-Sludge Process(MASP) containing marine silica and volcanic ash-rock as the contact media and Sawdust-Soil Filter Method were used. The results obtained are as follows: 1. MASP which treated two metric tons' livestock waste water a day decreased BOD by 97.5% from 4,400.0mg/I to 108.8mg/I and SS by 98.0% from 5,335.0mg/I to 111.0mg/I. 2. MASP decreased BOD by 93.9% from 2,549.1mg/I to 156.6mg/I and SS by 96.3% from 3,521.9mg/I to 132.0mg/I when ten metric ton's livestock waste water was treated a day. 3. BOD and SS were decreased by 83.4% from 45.1mg/I to 7.5mg/I and by 83.4% from 47.5mg/I to 7.9mg/I when the supernatant layer treated by MASP was purified by Sawdust-Soil Filter Method.

• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2007

Application of sludge wastes into the field may help soil fertility with physical, chemical and biological properties. Efficient use of sludge waste, however, requires an individual assessment of the waste products. A lot of experiment into the organic waste-treated soils has been done for decade. However, studies have not been carried out on the assessment of agricultural soil by Basidiomycota. This study was assessed the influence of sludge application on soil healthy in agricultural upland soils. The organic wastes selected for long-term application experiment in this study were municipal sewage sludge (MSS), industrial sewage sludge (ISS), leather processing sludge (LS), alcohol fermentation processing sludge (FS), and pig manure compost (PMC). To develop the soil healthy assesment method, soil samples were diluted by 20X with distilled water. After shaking at 200rpm for 30 minutes, the shaked sample was mixed on PDA(Potato Dextrose Agar). And sterilized at $121^{\circ}C$ for 20 minutes. Coriolus hirsutus (MKACC 50560) was inoculated on petri-dish including PDA mixed sample. After the media was incubated at $25^{\circ}C$ for five days, the mycelial growth of C. hirsutus was measured. When the mycelial growth on sample media was compared with growth on media contained PDA only, well grown media contained sample soil was assesed as healthy soil. The results suggest that the simple method by Coriolus hirsutus is a handy way to assess the healthy of waste sludge-applied upland soils.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.16-25
• /
• 1998

Laboratory-scale experiment using anaerobic fluidized bed reactor was carried out to investigate the prehydrolysis step with caustic soda on the treatment efficiency of anaerobic sludge treatment, since the overall rate-limiting step for the complete anaerobic digestion of sludge was the hydrolysis step by extracellular bacterial enzymes of insoluble polymeric molecules. Reactors received a sludge which had not been pretreated, a 50-50 mixture of pretreated and untreated sludge, and the fully pretreated sludge. Hydraulic retention time of 10, 5, 2.5 days and 1 day were applied with an respective equivalent organic loading rate of 1.17, 2.23, 4.17, 11.24 gCOD/L/d. Reactor with the untreated sludge did not archieve adequate digestion even at the HRT of 5 days, and reactor, which received the 50-50 mixture, operated well at the HRT of 5 days, but began to show signs of unstable digestion at the HRT of 2.5 days. While, reactor, which was fed the hydrolyzed sludge, operated reasonably well at the 2.5 days, but was showing somewhat decrease in removal efficiencies. Results, therefore, have substantiated that the limiting reaction in the anaerobic treatment process is hydrolysis. The soluble COD did not significantly accumulate in the reactor as organic acid form, even when they were highly stressed. It was believed that this resistance to a build-up of organic acids and soluble COD behavior was mainly due to the maintenance of the methane bacteria in the fixed-film system which prevents washout as the organic loading increased. The anaerobic fluidized bed reactor was therefore effective for the digestion of waste activated sludge at short HRT.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.1
• /
• pp.85-92
• /
• 2010

In this study, odorous compounds emitted from various wastewater treatment were treated with using the non-thermal plasma reaction, and the effluent gas from the plasma reactor was introduced to a waste sludge reactor to achieve simultaneous sludge reduction. Hydrogen sulfide, the model odorous compound, was removed at 70% using the plasma reaction, and greater than 99% removal efficiency was observed when treated by the sludge reactor. In addition, the sludge reactor showed a high efficiency of ozone removal. As ozone reacted with sludge, oxidation with organic matters took place, and total COD decreased by 50~60% and soluble COD increased gradually. As a result, the integrated process consisting of the non-thermal plasma and the sludge reactor can be successfully applied for the simultaneous treatment of malodorous gas and waste sludge.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.267-270
• /
• 2014

Since contaminants of syngas obtained from the biomass gasification are removed, the syngas is clean fuel. In this study a high-efficiency energy production system is developed. The system produces electricity using a waste pressure and feeds a low-pressure steam to Dyeing industrial complex. Also, iron oxide derived from dyeing sludge is utilized as a self-catalyst to reform a tar and reduce a tar emission from gasifier. This system increases the amount of syngas and finally achieves a highly efficient gasification.