• 제목/요약/키워드: waste powder

검색결과 592건 처리시간 0.027초

TFT-LCD 폐유리 사용 고강도 콘크리트 파일의 특성 (Properties of PHC Piles Using TFT-LCD Waste Glass)

  • 이승헌;이승태;민경산;전성환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.319-320
    • /
    • 2010
  • 시멘트 대체재로서 폐 TFT-LCD 유리분말을 사용하여 고강도 파일 콘크리트의 기본적인 물성을 조사하였다. 본 연구를 통하여 얻은 데이터를 근거로 폐 TFT-LCD 유리분말이 고강도 콘크리트 파일 콘크리트용 혼화재로서 사용이 가능성이 있음을 확인하였다.

  • PDF

Preparation and Characterization of Polypropylene/Waste Ground Rubber Tire Powder Microcellular Composites by Supercritical Carbon Dioxide

  • Zhang, Zhen Xiu;Lee, Sung-Hyo;Kim, Jin-Kuk;Zhang, Shu Ling;Xin, Zhen Xiang
    • Macromolecular Research
    • /
    • 제16권5호
    • /
    • pp.404-410
    • /
    • 2008
  • In order to obtain 'value added products' from polypropylene (PP)/waste ground rubber tire powder (WGRT) composites, PP/WGRT microcellular foams were prepared via supercritical carbon dioxide. The effects of blend composition and processing condition on the cell size, cell density and relative density of PP/WGRT micro-cellular composites were studied. The results indicated that the microcellular structure was dependent on blend composition and processing condition. An increased content of waste ground rubber tire powder (WGRT) and maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) reduced the cell size, and raised the cell density and relative density, whereas a higher saturation pressure increased the cell size, and reduced the cell density and relative density. With increasing saturation temperature, the cell size increased and the relative density decreased, whereas the cell density initially increased and then decreased.

Application of tire powder and food waste compost as biofilter materials to degrade volatile organic compounds

  • Oh, Dong-Ik;Lee, Jung-Ku;Kyoungphile Nam;Kim, Jae-Young
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.117-121
    • /
    • 2001
  • The present study has been conflicted to verify the applicability of tire powder and food waste compost as biofilter materials to degrade volatile organic compounds. Batch and column tests were performed to determine the optimum ratio of tire powder to compost and the appropriate mixing type of two materials for removal of the selected VOCs, i.e., benzene, ethylbenzene, PCE, and TCE. According to batch tests, tire powder and compost mixture had faster removal rate than the compost. The biofilter column filled with tire powder and compost showed better VOC removal efficiency than that filled with only tire powder. In this study, the best removal rate was observed in the sandwich type column test of which the tire : compost weight ratio was 1:2

  • PDF

재생 미분말의 발생현황과 특성에 관한 기초적 연구 (The Fundamental Study on Generation and Properties of Recycled Concrete Powder)

  • 김재원;김하석;임대빈;이도헌;김봉주;김진만
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 추계 학술발표회 논문집
    • /
    • pp.521-524
    • /
    • 2006
  • This study is about the production and properties of waste concrete powder that recycling aggregate is crushed to the waste concrete. We researched the generation and the disposal of recycled concrete powder. It is chemica] and physical features that is compared and analysis according to its production system and repeated crushing of time. Recycled concrete powder is more generated wet process than drying process. In addition, the more it is repeated crushing of time, the more recycled concrete powder is generated. Recycled concrete powder is discovered that wet process is larger of the specific area, lower density and particle size.

  • PDF

플라이애시와 폐유리분말을 사용한 외단열용 마감모르타르의 고온 특성 (High Temperature Properties in Finishing Mortars of Exterior Insulation Finishing System Using Fly Ash and Waste Glass Powder)

  • 송훈;신현욱
    • 자원리싸이클링
    • /
    • 제28권6호
    • /
    • pp.64-72
    • /
    • 2019
  • 플라이애시는 발전소의 탄종 및 품질에 따라 화학조성이 다르고 품질 변화가 크며 탄소함량과 입경에 따라 분류하며, 폐유리분말은 파유리를 분쇄하여 제조하고 분쇄정도에 따라 분류한다. 건축물의 외단열 공법은 경제적이면서 단열성능이 우수한 폴리스티렌 폼 단열재를 활용한 공법이 일반적이다. 하지만 유기계 단열재는 단열성능이 우수하나 화재에 취약하고 다수의 문제점이 지적되었다. 본 연구에서는 플라이애시와 폐유리분말을 사용하여 고온에서 안정한 외단열용 마감모르타르를 제작하고 고온 강도 및 난연 특성을 검토하였다. 실험 결과, 플라이애시와 폐유리분말을 이용한 마감모르타르는 고온에서의 안전성이 높았다. 하지만 강도감소의 폭이 크므로 적절한 배합조건의 선정이 필요하다.

반탄화 목분과 폐활성탄 혼합물의 복합연료활용을 위한 연료적 특성에 관한 연구 (A Study on Fuel Characteristics of Mixtures Using Torrefied Wood Powder and Waste Activated Carbon)

  • 이창구;강석구
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권1호
    • /
    • pp.135-143
    • /
    • 2015
  • 본 연구는 반탄화 목분과 정수기 필터용 폐활성탄 분쇄물을 혼합한 혼합물을 연료로 사용하였을 경우의 그 연료적 특성을 평가하고자 하였다. 반탄화 목분은 국산 범용수종인 졸참나무와 소나무를 이용하여 급속으로 목재칩 열가공처리가 가능한 wood roaster를 이용하여 처리하였으며 처리조건은 $200^{\circ}C$에서 각 300 s, 450 s, 600 s를 적용하였다. 이때 폐활성탄과 반탄화 목분의 혼합비율은 중량대비(wt%) 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40, 80 : 20으로 하였으며, 이에 대한 연료적 특성에 평가를 위해 발열량, 원소분석, 회분함량 등을 측정하였다. 그 결과는 다음과 같다. 1. 동일시간, 온도 등의 wood roasting 처리조건에서 소나무가 졸참나무에 비해 탄소함량이 더 높았으며, 이는 낮은 온도와 짧은 시간에 최적 탄화도를 나타냄으로 소나무가 효율적인 반탄화 작업이 가능함을 알 수 있다. 2. 반탄화 목분 및 무처리 목분의 폐활성탄 첨가율이 증가할수록 총발열량 값은 급격히 증가하였고 회분함량 또한 증가하였다. 3. 반탄화 목분과 무처리 목분에 폐활성탄을 혼합한 경우에는 두 조건 모두 첨가율에 따라 총발열량은 증가하지만 무처리 보다는 반탄화 목분 그리고 졸참나무보다는 소나무가 더 높은 총발열량을 나타냈다. 4. 폐활성탄을 목분과 함께 혼합물의 원료로 사용하기 위해서는 $800^{\circ}C$, 4시간 연소조건 이상의 고온 연소조건이 필요하다고 판단된다. 이는 $800^{\circ}C$, 4시간 연소조건에서도 완전연소가 되지 않고 회분상태로 잔류하는 함량이 매우 높기 때문이다. 5. 또한 무처리 목분과 반탄화 목분에 폐활성탄을 혼합한 조건 중 무처리 목분에 폐활성탄을 혼합하는 조건이 총발열량의 증가율이 더 높게 나타났으며, 이러한 현상은 소나무보다는 졸참나무가 더 명확하게 나타났다. 최적 회분함량의 폐활성탄 첨가비율은 소나무 무처리 목분에 총 중량대비 5% 이상, 10% 미만의 조건이며 이는 1급 펠릿에 해당되는 0.7% 미만의 기준을 만족하는 것으로 나타났다.

Environmental Effect of the Coffee Waste and Anti-Microbial Property of Oyster Shell Waste Treatment

  • Thenepalli, Thriveni;Ramakrishna, Chilakala;Ahn, Ji Whan
    • 에너지공학
    • /
    • 제26권2호
    • /
    • pp.39-49
    • /
    • 2017
  • Coffee is one of the most popular and consumed beverages in the world, which leads to a high contents of solid residue known as spent coffee grounds (SCG). As is known, coffee beans contain several classes of health related chemicals, including phenolic compounds, melanoidins, diterpenes, xanthines and carotenoids. The waste water coming out of coffee industries has high concentration of organic pollutants and is very harmful for surrounding water bodies, human health and aquatic life if discharged directly into the surface waters. Hence it is essential to treat and manage the coffee waste. Oyster shells are a waste product from mariculture that creates a major disposal problem in coastal regions of southeast Korea. In the study, the oyster shell waste was used to treat the coffee waste and its effluents. Oyster shells are calcined at $1000^{\circ}C$ for 2 h, and allowed to test the calcined CaO powder ability to inhibit the growth of bacteria in different aging coffee wastes. Calcined oyster shell powder showed anti-bacterial effect that inhibited cell growth of Escherichia coli and other bacterial forms. The antimicrobial activity of calcium oxide from oyster shell waste for biological treatment and utilization as a fertilizers with economic ecofriendly in nature.

무기계 재생원료를 사용한 저탄소형 수경성 시멘트 결합재의 특성 (Properties of Low Carbon Type Hydraulic Cement Binder Using Waste Recycle Powder)

  • 송훈;신현욱;태성호
    • 한국건설순환자원학회논문집
    • /
    • 제7권1호
    • /
    • pp.22-28
    • /
    • 2019
  • 시멘트는 건설업에의 기초소재이지만 시멘트 제조시 고온의 소성이 필요하고, 소성시의 원료 및 연료로부터 발생하는 $CO_2$는 새로운 환경문제로 인식되어 이를 저감하기 위한 노력이 지속되고 있다. 콘크리트 분야에서의 $CO_2$ 저감을 위한 기술은 고로슬래그 및 플라이애시 등의 혼합시멘트 사용을 권장하는 것이 저감 대책의 대부분을 차지하고 있다. 또한 콘크리트 구조물 해체 시 발생하는 건설폐기물도 또 다른 환경문제로 인식되며 재활용률을 높이기 위한 여러 가지 방안들이 시행되고 있다. 본 연구는 구조물 해체 시 발생하는 무기계 재생원료를 리사이클을 통해 시멘트 제조의 원료로서 활용하기 위한 것이다. 폐콘크리트, 폐시멘트블록, 폐점토벽돌 및 폐천장재 미분말의 원료조성 검토를 통해 시멘트의 원료로서 활용하고자 한다. 연구결과 재생원료의 원료조성 및 조합을 통해 저탄소형 수경성 시멘트 결합재 제조가 가능한 것을 확인하였다.

재활용원료의 첨가량과 입경에 따른 재생 ${Al_2}{O_3}$ 세라믹스의 소결 특성 (Sintering Properties of Renewed ${Al_2}{O_3}$Ceramics with Particle Size and Addition Amount of Recycling Powder)

  • 신대용;한상목;김경남
    • 한국세라믹학회지
    • /
    • 제38권12호
    • /
    • pp.1123-1131
    • /
    • 2001
  • 재활용 $Al_2$O$_3$분말인 구조재료용 $Al_2$O$_3$세라믹스의 분쇄분말과 폐Al$_2$O$_3$흡착제의 첨가량과 입경에 따른 재생 $Al_2$O$_3$세라믹스의 소결특성을 조사하였다. 1,$650^{\circ}C$에서 5시간 소결한 순수 $Al_2$O$_3$시편을 급랭하여 분쇄한 -40과 +40$\mu$m의 $Al_2$O$_3$분말과 폐Al$_2$O$_3$흡착제를 순수한 $Al_2$O$_3$분말에 10~50wt% 첨가한 후, 재소결하여 재생 $Al_2$O$_3$세라믹스를 제조하였다. 재활용 $Al_2$O$_3$분말의 첨가량과 입경에 관계없이 소결온도가 증가함에 따라 시편의 밀도와 3점곡강도는 증가하였으나, 동일 소결온도에서는 재활용 $Al_2$O$_3$분말의 첨가량이 증가함에 따라 밀도와 3점곡강도는 감소하였다. ~30wt%의 $Al_2$O$_3$분쇄분말(-40$\mu$m), ~20wt%의 $Al_2$O$_3$분쇄분말(+40$\mu$m) 및 10wt%의 폐Al$_2$O$_3$흡착제를 첨가한 시편의 3점곡강도는 200MPa 이상이었다. 재생 $Al_2$O$_3$시편의 치밀화를 위하여 5~20wt%의 폐유리분말을 첨가하여 1200~1$650^{\circ}C$에서 5시간 소결한 시편은 폐유리분말의 첨가량이 증가함에 따라 최대 밀도와 3점곡강도를 나타내는 온도는 감소하였으나, 140$0^{\circ}C$이상에서는 페유리분말을 첨가하지 않은 시편에 비하여 밀도와 3점곡강도가 감소하여 재생 $Al_2$O$_3$세라믹스의 소결성 향상에는 기여하지 못하였다.

  • PDF