• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.39-50
• /
• 2000

Because of numerous mountain region, agricultural affairs work can't be done without groundwater in Kangwon Do area. Especially to improve high mountain area vegetable quality and raise income offarmers, both of groundwater and hydrothermal system to keep adequate temperature in hot and coldseason have to be developed. Domestic groundwater was developed for the use of agricultural watersince 1960. Exact investigation and control of groundwater are greatly required in utilizing undergroundspace as subway, nuclear power plant, oil and hazardous waste storehouse. Groundwater contaminationowing to industrial irrigation, trash decomposition can have a serious effect on human health and rustof underground building. In this study, global prospecting system are applied to detect groundwater, using electrical, seismic and georadar prospecting method.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.19-24
• /
• 2009

As the environmental pollution by the drastic increase of vehicles becomes one of the social major concerns, the method of reducing the harmful exhaust emission is being the subject of interest. Utilization of waste edible oil as a raw material for biodiesel production is helpful not only for the stable supply of raw materials but also costing down the biodiesel price. This study was conducted to examine the combustion and thermal characteristics with mixing ratio of biodiesel fuel. Flash points, fire points and autoignition temperature (AIT) were measured by using Tag closed cup, Cleveland open cup flash point tester and AIT apparatus. As the result, flash points, fire points and AIT increased with percentage of more contained biodiesel.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.367-381
• /
• 2011

Reducing waste for the efficiency of production is becoming more important because of the rapidly changing market circumstances and the rising material and oil prices. The dispatching also has to consider the characteristic of production circumstance for the efficiency. The production circumstance has the non-identical parallel machines with rework rate since machines have different capabilities and deterioration levels in the real manufacturing field. This paper proposes a dispatching method, FTLR (Flow Time Loss Index with Rework Rate) for production efficiency. The goal of FTLR is to minimize flow time based on such production environments. FTLR predicts the flow time with rework rate. After assessing dominant position of expected flow time per each machine, FTLR performs dispatching to minimize flow time. Experiments compare various dispatch methods for evaluating FTLR with mean flow time, mean tardiness and max tardiness in queue.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.87-95
• /
• 1997

A chemical heat pump based on the reversible reactions between metal chlorides and ammonia gas is attractive alternative to compression system and liquid absorption systems in cooling and refrigerating fields. The advantages of chemical heat pump are no regulatory constants due to CFC refrigerants, utilization of gas, industrial waste heat, electricity, fuel oil etc. as heat sources and wide applications to energy storage system, large-scale energy managements for industrial process. The scale-up of chemical heat pump from laboratory prototype to pilot plants necessitates the interpretation of system performance and evaluation of dynamic behavior in the chemical reactor. This study contains the prediction of performance of chemical refrigerator according to operating condition, the dynamic simulations through reactor modelling, which is used for the calculation of reactive medium temperature and the conversion variation with reactor cooling temperature, and the effect survey of block parameters on the power of refrigerator.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.2
• /
• pp.85-90
• /
• 2009

The Toyota production system (TPS) developed by Toyota corporation is a management principle and production model to improve values added through elimination of waste. Since the oil shock in 1970s, the TPS has drawn the worldwide attentions as a main factor of competitiveness of Japanese manufacturing system and has been studied and implemented in many countries regardless of size and types of industry. For the correspondence to various customer's requirement, it is required to establish on time delivery procedure and to shorten lead time. Therefore it intended to establish TPS which is adopted to 7 losses reduction and JIT(Just in Time). In this paper, the automatic production line for color TV manufacturing by TPS was developed and proved to push up two times of productivity, to reduce the 25 workers at a time, and to widen the flexibility of manufacturing from 14" to 25" TV.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.42-48
• /
• 1993

In the present work, decoloring of acid dye solution by the diethylaminoethylated cellulosic adsorbents($CA_{DASE}$) was studied with the aim of developing polymeric adsorbents for the treatment of colored wastewaters. To prepare the cellulosic adsorbents, the $CA_{DASE}$ cellulose and polyvinyl alcohol mixture(80 wt% cellulose content) were crosslinked by tryacryloyl hexahydro-s-tryazine(TAHHT), ammonium phosphate and then treated with solutions containing sodium hydroxide and 2-diethylaminoethyl chloride. Batch and flow method were employed to determine decoloring capacity of C $A_{DEAE}$ for C.I.acid yellow 49. $CA_{DASE}$ exhibited much better desorption capacity than activated carbon. Furthermore, the exhausted $$CA{DASE} could be readily regenerated by washing with dilute sodium hydroxide.

• KSBB Journal
• /
• v.17 no.4
• /
• pp.396-402
• /
• 2002

Biodiesel has attracted considerable attention during the past decade as a biodegradable, nontoxic, and renewable fuel, Several processes for the production of biodiesel have been developed, among which transesterification under alkali-catalysis gives high level yield of methyl esters in short reaction times. In this research, response surface method was applied to optimize the transesterification reaction under alkali-catalysis. It was found that reaction temperature, reaction time, and agitation rate of reactor had profound effects among the seven variables affecting on biodiesel conversion. The optimal temperature, reaction time, and agitation speed were 67$^{\circ}C$, 68 minutes, and 94 rpm, respectively. Under the optimal conditions, the experimental value of biodiesel conversion was 99.7%.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.1
• /
• pp.29-37
• /
• 2013

In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1099-1104
• /
• 2008

Recent year, mean energy consumptions of a people are higher than other country. And international oil price became over 120 dollar. This energy environment as well as energy war. Maybe, the Meteorological Administration is going to enforce scorching heatwave special report system from that come summer. Besides, 2008 summer, maximum demand power is expected by 64,240,000kW. The electric power equipment reserve rate appeared in to keep 12.5% level. Chilled water storage system witch is one of electric load administration system. Heat pump system used cooling tower heat recovery is advantage that use is possible to summer in small a public bath building. In this paper, we suggest that heat pump system by heat recovery using cooling tower when it is heating operation of ambient air temperature. To apply cooling tower heat recovery heat pump to chilled water heat storage type and achieved performance evaluation about operation. As a result, performance of heat pump system that about 121% in cooling mode, 138% in heating mode higher than KEPCO standard. And heating operation possible to ambient air temperature about $23^{\circ}C$, which of appear cooling tower outlet temperature about $13^{\circ}C$.

• Clean Technology
• /
• v.24 no.2
• /
• pp.119-126
• /
• 2018

This study introduced a treatment process that was developed to treat Indonesian low-rank coal with high-ash content, which has the same characteristics as residual coal from the biosolubilization process. The treatment process includes separation of ash, solid-liquid separation, pelletizing, and drying. To reduce the ash content, flotation was performed using 4-methyl-2-pentanol (MIBC) as frother, and kerosene, waste oil, and cashew nut shell liquid (CNSL) as collectors. The increasing amount of collector had an effect on combustible coal recovery and ash reduction. After flotation, a filter press, extruder, and an oven drier were used to make a dried coal pellet. Then another coal pellet was made using asphalt as a binder. The compressive strength and friability of the coal pellets were tested and compared.