• 제목/요약/키워드: waste oil

검색결과 530건 처리시간 0.034초

산업폐수중 유화액막에 의한 크롬(VI)의 분리 (Separation of Chromium(VI) Ion in Industrial Waste Water throunh Liquid Surfactant Membrane)

  • 초민승;강안수;우인성;이영순
    • 한국안전학회지
    • /
    • 제4권1호
    • /
    • pp.15-24
    • /
    • 1989
  • The transport of Chromium(Vl) ion from waste water throughl the liquid surfactant membrane containing tri-n-octylamine as a carrier, was analyzed by a slab model and was investigated through experiments. For the experiment of membrane stability, concentrations of surfactant and liquid parafnn oil were analyzed. Extraction euperiments were carried out to observe the effect of system variables, such as stirring speed, concentration of carrier, and NaOH in internal aqueous phase, and concentrations of H$_2$SO$_4$and initial chromium(VI) ion in external aqueous phase at $25^{\circ}C$. It is concluded that the most stable formation of liquid membrane emulsion was obtained when surfactant concentration is above 3 wt. % and liquid parafnn oil concentration is 50 vol. %. The transport of chromium(VI) ion in bacth extractor increased with increasing carrier concentration, the volume ratio of emulsion to external aqueous phases, and initial concentration of chromium(VI) ion under the optimum stirring speed of chromium(VI) ion below 2 ppm. The theoretical equation on the transport of chromium(Vl) ion agreed well with the experimental results.

  • PDF

폐패각-정유폐촉매-배연탈황석고를 사용한 Calcium Sulfoaluminate 클링커의 합성과 특성 (Synthesis and Properties of Calcium Sulfoaluminate Clinker Using Waste Shell, Spent Oil-Refining Catalyst and Desulfurized Gypsum)

  • 이건호;송태웅
    • 한국세라믹학회지
    • /
    • 제42권7호
    • /
    • pp.483-489
    • /
    • 2005
  • For the raw materials of 3CaO$\cdot$3Al$_{2}$O$_{3}$ $\cdot$CaSO$_{4}$(CSA) clinker manufacturing, the applications of industrial wastes such as waste shell, spent oil-refining catalyst and desulfurized gypsum were examined. The c1inkerbility of the raw mix and the behaviour of formation of clinker minerals were studied and then some hydraulic properties of cements containing the clinker were also investigated. By virtue of the high reactivity of thermally decomposed raw materials, CSA clinkers were obtained at relatively low temperature of 1250$^{\circ}C$ and thus oil-refining catalysts were more desirable than aluminium hydroxide as an aluminous raw material. The expansive cement samples showed somewhat lower flow value than that of OPC, but their compressive strengths were developed earlier and higher than that of OPC due to formation of ettringite in the early hydration time, which indicated the possibility of practical use of low-cost CSA clinker using industrial wastes only.

고온 고압 조건에서의 난분해성 액상폐기물 분해 특성 (Decomposition Characteristics of Non-Degradable Liquid Waste under High Temperature and High Pressure Conditions)

  • 이강우;손병현
    • 한국산학기술학회논문지
    • /
    • 제8권6호
    • /
    • pp.1572-1578
    • /
    • 2007
  • 지정폐기물은 폐산, 폐알칼리, 폐유, 폐유기용제, 폐합성수지, 먼지, 슬러지, 감염성폐기물 등이며, 이 중에서 많은 부분이 폐산, 폐알칼리, 폐유, 폐유기용제, 폐합성수지 등 액상지정폐기물이다. 이와 같은 액상지정폐기물을 적절히 분해하기 위해 먼저 액상지정폐기물에 대하여 밀도, 삼성분, 원소분석, 발열량 등 물리화학적 특성을 분석하고 0.3톤/일급의 고온고압시스템을 설계하였으며, 반응온도는 $1,200^{\circ}C$ 이상, 압력은 최대 4 $kg_f/cm^2(g)$ 조건에서 실험을 수행하였다. 폐유의 평균 밀도값은 0.93 g/mL. 폐유기용제는 0.93 g/mL, 폐합성수지는 0.91 g/mL이었으며, 삼성분과 원소분석 결과 폐유기용제는 수분 54.34%, 회분 3.35%, 가연분 42.31%이었고, 탄소 29.73%, 수소 3.82%, 산소 5.94%, 질소 2.31%, 황 0.51%이었다. 폐유의 평균 저위발열량은 8,294 kcal/kg, 폐유기용제의 경우 7,462 kcal/kg, 그리고 례합성수지는 5,809 kcal/kg으로 나타났다. 액상례기물 중 유해물질의 분해 특성을 보기 위해 대상 폐기물에 혼합한 톨루엔, TCE 그리고 톨루엔이 고온에서 분해될 때 발생하는 벤젠 3가지 물질에 대해 고온 고압 처리 전후의 양으로 각물질의 DRE를 비교한 결과, 상압조건에서 벤젠 99.73%, 톨루엔 99.73%, TCE가 99.95% 이었으며 가압조건에서 벤젠99.97%, 톨루엔 99.82%, TCE가 99.99%으로 나타나 가압조건이 상압조건보다 유해물질의 분해율이 향상된 결과를 보였다. 본 실험결과 TCE/톨루엔 혼합물의 DRE는 99.73% 이상으로 매우 높게 나타나 유해물질이 적절히 분해됨을 확인할 수 있었다.nes., CWT+35‰+Anes., NWT+15‰+Anes. 및 CWT+15‰+Anes.의 8개 실험구를 2반복으로 설정하여 경북울진∼부산까지 약 400 km (6시간)를 차량수송하였다. 수송용기는 스티로폼상자(66×42×20 cnn)로서, 여기에 해수 3 L와 액화산소를 넣은 비닐봉지에 넙치 8마리씩 수용하여 수송하였다. 혈액의 성상 및 분석항목은 수송전ㆍ후에 채혈하여 비교하였다. 수송전 hematocrit는 22.2±3.8%에서 수송후 NWT+35‰에서 15.3+3.9%, CWT+35‰은 16.7±3.0%, NWT+15‰구에서는 19.2±1.8%로 낮아졌으며, CWT+15‰구는 20.9±3.6%로 수송전과 차이가 없었다. 한편 NWT+15‰+Anes.구는 17.8±0.9%, CWT+15‰+Anes.구는 14.5±1.5%로 낮아졌다. Cortisol은 수송전 2.4±0.1 ng/ml로부터 CWT+35‰구는 16.7±12.8 ng/ml, NWT+35‰구는 47.9+19.8 ng/ml, NWT+15‰구는 43.5±13.9 ng/ml, CWT+15‰구는 26.1±8.3 ng/ml, NWT+15‰+Anes.구는 61.7±3.3 ng/ml, CWT+15‰+Anes.구는 86.1±19.0 ng/ml로 높아졌다. Glucose는 수송전 74.2±32.6 mg/dl로부터 NWT+35‰구는 197.9±27.5 mg/dl, CWT+35‰구도 272.1±29.9 mg/dl로 유의하게 높아졌다. Na/sup +/의 수송전 농도는 163.5±0.6 mEq/L로부터 NWT+35‰구와 CWT+35‰구는 각각 175.3±1.2 mEq/L, 190.0±5.0 mEq/L로 높아졌으며, 다른 실험구에서는 차이가 없었다. 본 연구 결과, cortisol과 glucose에서 수송전보다는 모든 실험구에서 높게

  • PDF

마이크로웨이브 열분해(熱分解)를 이용(利用)한 폐(廢) 폴리스티렌과 모터 오일 혼합물(混合物)로부터 고분자(高分子) 원료(原料) 물질(物質) 회수(回收)에 관한 연구(硏究) (Study on Recovery of Polymeric Raw Materials from WastePolystyrene in Motor Oil using Microwave Thermal Decomposition)

  • 강태원
    • 자원리싸이클링
    • /
    • 제15권5호
    • /
    • pp.11-16
    • /
    • 2006
  • 폐 폴리스티렌과 모터 오일의 혼합물로부터 마이크로웨이브 열분해를 이용하여 유용한 고분자 원료물질의 회수를 위한 연구를 수행하였다. 마이크로웨이브 반응기로 quartz tube를 사용하였으며 마이크로웨이브 흡수체로 실리콘 카바이드를 사용하였다. 공정 변수로 마이크로웨이브 입력 파워를 180에서 250 W까지 변화시켰으며, 마이크로웨이브 조사시간을 30분에서 1시간까지 변화시키며 실험하였다. 열분해를 통하여 얻어진 생성물을 GC/MS를 사용하여 분석한 결과 스티렌, 메틸 스티렌, 톨루엔, 그리고 에틸벤젠이 4개의 주요 회수 성분이었으며, 이 중 폴리스티렌으로부터 스티렌의 회수율은 약 50% 이었다. 열분해에 마이크로웨이브를 사용함으로써 일반 열분해 보다 훨씬 낮은 온도에서 열분해가 이루어졌다.

소결 코팅 파이프의 열전달 성능에 관한 연구 (A Study on the Heat Transfer Performances in Sintered Pipes)

  • 박기호;;김성일;정대헌
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.436-439
    • /
    • 2008
  • This paper is to research the heat transfer performance of the sintered pipe. Recently, oil prices is to be 127 $ per barrel, we expect higher costs this summer. We promote alternative fuels, after oil and gasoline prices reached record highs. The governments have made efforts to avoid future crisis by continuing the move toward renewable energy and energy saving. In this paper, we have fabricated a sintered pipe, the heat transfer performance of sintered pipe is achieved experimentally. The pipe is copper tube of outer diameter of 15.88 mm, the length of the pipe is 800 mm. Based on the experimental results, it is shown the overall heat transfer coefficient of sintered pipe is increased as compared with that of a straight pipe, is equal as compared with that of a spiral pipe. The overall heat transfer coefficient was $0.075{\sim}0.09\;kW/^{\circ}C$

  • PDF

폐플라스틱의 열분해 유화기술 개발 (Process Development of Pyrolysis Liquefaction for Waste Plastics)

  • 노남선;신대현;박소원;이경환;김광호;전상구;조봉규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.523-526
    • /
    • 2006
  • The target of this work was the process development of demonstration plant to produce the high quailty alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70t/y and the pi lot plant of 360 t/v had been developed. Main research contents in this step were the process performance test of pilot plant ot 360ton/year and the development of demonstration plant of 3 000 t/y which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/v showed components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

  • PDF

Bio-oil production using residual sewage sludge after lipid and carbohydrate extraction

  • Supaporn, Pansuwan;Ly, Hoang Vu;Kim, Seung-Soo;Yeom, Sung Ho
    • Environmental Engineering Research
    • /
    • 제24권2호
    • /
    • pp.202-210
    • /
    • 2019
  • In order to maximize the utilization of sewage sludge, a waste from wastewater treatment facility, the residual sewage sludge generated after lipid and carbohydrate extraction for biodiesel and bioethanol production was used to produce bio-oil by pyrolysis. Thermogravimetric analysis showed that sludge pyrolysis mainly occurred between 200 and $550^{\circ}C$ (with peaks formed around 337.0 and $379.3^{\circ}C$) with the decomposition of the main components (carbohydrate, lipid, and protein). Bio-oil was produced using a micro-tubing reactor, and its yield (wt%, g-bio-oil/g-residual sewage sludge) increased with an increase in the reaction temperature and time. The maximum bio-oil yield of 33.3% was obtained after pyrolysis at $390^{\circ}C$ for 5 min, where the largest amount of energy was introduced into the reactor to break the bonds of organic compounds in the sludge. The main components of bio-oil were found to be trans-2-pentenoic acid and 2-methyl-2-pentenoic acid with the highest selectivity of 28.4% and 12.3%, respectively. The kinetic rate constants indicated that the predominant reaction pathway was sewage sludge to bio-oil ($0.1054min^{-1}$), and subsequently to gas ($0.0541min^{-1}$), rather than the direct conversion of sewage sludge to gas ($0.0318min^{-1}$).

폐유를 이용한 하수슬러지 유중 건조 연구 (A Study for Drying of Sewage Sludge through Immersion Frying Using Used Oil)

  • 신미수;김혜숙;홍지은;장동순;엄태인
    • 대한환경공학회지
    • /
    • 제30권7호
    • /
    • pp.694-699
    • /
    • 2008
  • 유기성 슬러지의 직접 매립 금지와 가까운 장래에 해양투기가 금지될 전망이므로 발생되는 슬러지의 적절한 처리에 대한 발전된 기술의 연구가 필요하다. 본 연구에서는 슬러지 건조기술 중 하나인 폐유를 활용하여 하수슬러지를 유중 건조시키는 방법에 대한 연구를 수행하였다. 이 공정의 기본 원리는 오일을 가열함으로써 형성되는 급격한 압력변화에 의해 슬러지 공극을 통하여 수분이 빠르게 증발하도록 하는 것이다. 일련의 건조 실험 결과, 건조온도, 건조시간, 오일종류, 슬러지 형상 등 중요한 실험변수에 따른 건조곡선이 얻어졌다. 건조 오일로 폐식용유를 사용한 경우 건조시간에 따른 수분함유량 변화는 건조시간 10분이 지나면서 현저히 감소하기 시작하여 14분 이후에는 건조온도에 관계없이 수분함유량이 5% 이내로 감소하였다. 유중 건조 온도는 120$^{\circ}C$에 비해 140$^{\circ}C$ 이상에서 수분 증발이 급격히 증가한 것으로 나타났다. 그러나 140$^{\circ}C$ 이상에서는 큰 차이를 나타내지 않았다. 슬러지 직경이 감소할수록 효율적으로 건조되는 것으로 나타났는데 이는 단위체적당 표면적의 증가에 기인하는 것이다. 오일 종류의 변화에 따른 영향을 살펴보면 폐 엔진오일을 사용한 경우 점도가 증가함에 따라 폐식용유에 비하여 수분 증발이 현저히 지체되는 현상이 나타났다. 그러나 건조온도 140$^{\circ}C$ 이상에서는 120$^{\circ}C$에 비하여 건조시간이 경과함에 따라 수분 증발이 비교적 크게 증가하는 결과를 나타내었다. 그러므로 폐오일의 종류에 관계없이 건조온도는 140$^{\circ}C$ 이상으로 유지하는 것이 바람직한 것으로 사료된다.

Emulsion(B.C유+폐수)연료의 연소효율에 관한 실험적 연구 (An Experimental Study on the Combustion Characteristics of Wastewater-Emulsion Fuel)

  • 정진도
    • 에너지공학
    • /
    • 제12권4호
    • /
    • pp.267-273
    • /
    • 2003
  • Emulsion 연료는 연료절감과 오염방지특성에 의하여 많은 관심을 끌고 있다. 본 연구에서는 B-C유와 Emulsion 연료(B-C유와 폐수를 혼합하여 만든 연료)의 연소효율을 비교 분석하였다. 보일러의 양쪽에 R-Type Thermocouple과 광학온도계를 설치하였고, 연소가스배출구에 연소측정기를 설치하여 B-C유와 Emulsion 연료의 연소시 화염의 온도, 연소율 및 배기가스 농도를 측정 비교하였다. 이에 대한 실험 결과로서, 보일러 전$.$후반부의 화염온도는 B-C유의 화염온도보다 약 5$0^{\circ}C$ 낮았고, 이러한 온도차이의 원인은 Emulsion 연료의 폐수 속 수분 잠열로 인한 것으로 사료되어진다. 또한 Emulsion연료를 사용하였을 때 배출가스의 분석 결과는 오염물질의 같소 및 CO 농도 또한 매우 낮게 측정되어짐을 나타내고 있다. 3-C유와 Emulsion 연료의 연소 효율은 각각 85.5%와 84.8%이다.

연속식 폐 EPS 열분해 반응에 대한 잔류물의 영향 (Effect of Organic Residue on the Continuous Pyrolysis of Waste Polystyrene)

  • 윤병태;김성보;이상봉;최명재
    • Korean Chemical Engineering Research
    • /
    • 제43권1호
    • /
    • pp.125-128
    • /
    • 2005
  • 폴리스티렌의 열분해반응에서 분해반응속도 및 생성되는 오일 중에 함유된 스틸렌모노머와 부산물로 얻어지는 에틸벤젠, 알파메틸스티렌, 다이머, 트라이머 등은 반응온도 및 반응시간 등의 여러 가지 변수들에 의해 영향을 받았으며, 특히 반응시간에 따라 반응성 및 스티렌의 수율은 많은 차이를 보였다. 이 결과는 열분해 반응과정에서 생성되는 유기성 잔류물과 고화탄소의 영향 때문에 기인하였다. 연속열분해시간의 진행과 함께 생성되는 오일의 수율이 저하되었으며 오일에 함유되어 있는 스티렌의 선택도는 감소하였으며 부산물인 알파메틸스티렌, 에틸벤젠, 벤젠, 톨루엔 등의 부산물의 생성은 증가하였다. 본 연구결과로부터 새로운 연속반응을 위한 열분해반응기를 사용하였다.