• 한국건설순환자원학회논문집
• /
• 제2권4호
• /
• pp.314-320
• /
• 2014

시멘트산업은 건설산업에의 기초소재를 공급하는 중추이지만 시멘트 제조시 고온의 소성이 필요하고 소성시의 원료 및 연료로부터 발생하는 $CO_2$와 구조물 해체시 발생하는 건설폐기물은 새로운 환경문제로 대두되고 있다. 본 연구는 폐콘크리트 미분말의 리사이클을 통해 시멘트로서 활용하기 위한 것이다. 기존의 불활성 충전재로서의 활용에서 벗어나 화학적 특성을 기반으로 배합조건을 조절하여 클링커 및 시멘트를 제조하고 미세조직 및 상분석을 실시하여 저탄소형 시멘트 개발 가능성을 타진하고자 한다. 연구결과 폐콘크리트 미분말을 활용한 저탄소형 시멘트 제조가 가능하며 유효활용을 위한 방안이 마련되어야 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.215-219
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A lot of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurity content such as sulphur, iron, ash and etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3-5 times more expensive than oil-based carbon black because of its process difficulties and requires pollutant treatment. Hydrophilic carbon is normally used far conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc.. In these applications, hydrophilic carbon must maintain its high purity. In this study magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. As results, the ash, iron and sulphur content of product decreased to less than 0.01wt.%, 0.0lwt.% and 0.3wt.% respectively, and the surface area of product was about 930 $m^2$/g.

• Carbon letters
• /
• 제11권2호
• /
• pp.131-136
• /
• 2010

Propellant waste was impregnated on the surface of activated carbon fiber and heat-treated at different temperature to introduce newly developed functional groups on the ACF surface. Functional groups of nitrogen and oxygen such as pyridine, pyridone, pyrrol, lacton and carboxyl were newly introduced on the surface of modified activated carbon fiber. The porosity, specific surface area, and morphology of those modified ACFs were changed as increasing the heat-treated temperature from 200 to $500^{\circ}C$. The optimum heat-treatment temperature was suggested to $500^{\circ}C$, because lower temperature given rise to the decrease of specific surface area and higher temperature resulted in the decrease of weight loss. Propellant waste can be used as an useful surface modifier to porous carbons.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.69-70
• /
• 2017

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.117-126
• /
• 2019

Activated carbon is carbon produced from carbonaceous source materials, such as coconut shells, coals, and woods. In this study, an activated carbon production system was analyzed by carbonization and activation in terms of environmental impact and human health. The feedstock of wood wastes for the system reduced fossil fuel consumption and disposal costs. Life cycle assessment methodology was used to analyze the environmental impacts of the system, and the functional unit was one tonne of wood wastes. The boundary expansion method was applied to analyze the wood waste recycling process for activated carbon production. An environmental credit was quantified by avoided impact analysis. Specifically, greenhouse gases discharged from 1 kg of activated carbon production system by feeding wood wastes were evaluated. We found that this system reduced global warming potential of approximately $9.69E+00kg\;CO_2-eq$. compared to the process using coals. The environmental benefits for activated carbon production from wood wastes were analyzed in contrast to other disposal methods. The results showed that the activated carbon system using one tonne of wood wastes has an environmental benefit of $163kg\;CO_2-eq$. for reducing global warming potential in comparison with the same amount of wood wastes disposal by landfilling.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.83-88
• /
• 2003

The woodceramics are porous amorphous carbon and glassy carbon composite materials. Woodceramics attracted a lot of attention in recent years because they are environmentally friendly and because of their unique functional characteristics such as catalysis, moisture absorption, deodorization, purification, carrier for microbial activity, specific stiffness, corrosion and friction resistance, and their electromagnetic shielding capacity. In this paper, we made new products of clay-woodceramics to investigate the industrial analysis and ethylene gas adsorption for basic data of building- and packging- materials keeping fruit fresh for a long time. Clay-woodceramics were carbonized for 3 h of heating in a special furnace under a gas flow of nitrogen(15 ml/min.) from 3 layers-clay-woodparticleboard made from pallet waste wood, phenol- formaldehyde resin(hereafter PF, Non volatile content:52%, resin content 30%), and clay(10%, 20% and 30%). Carbonization temperature was 400℃, 600℃ and 800℃. Experimental results shows that the higher the carbonization temperature, the higher the fixed carbon and the lower the volatile contents. The higher the clay content, the more the ash content. The higher the carbonization temperature, the more the ethylene gas adsorption. Carbonization temperature of 800℃ gave the best reslts as same as that of white charcoal and activated carbon.(800℃-clay-woodceramic: 5.36 ppm, white charcoal: 5.66 ppm, activated carbon: 5.79 ppm) The clay contents did not make difference of ethylene gas adsoption.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.47-48
• /
• 2023

In the domestic industrial sector, greenhouse gases emitted from the cement industry account for about 10%, with most of them generated during the cement clinker calcination process. During the calcination process, 57% of carbon dioxide is emitted from the decarbonation reaction of limestone, 30% from fuel consumption, and 13% from electricity usage. In response to these issues, the cement industry is making efforts to reduce carbon dioxide emissions by developing technologies for raw material substitution and conversion, improving process efficiency by utilizing low-carbon alternative heat sources, developing CO₂ capture and utilization technologies, and recycling waste materials. In addition, due to the limitations in purchasing and storing industrial byproducts generated from industrial facilities, many studies are underway regarding the recycling of construction waste. Therefore, this study analyzes the manufacture of calcium silicate cement (CSC), which can store carbon dioxide as carbonate minerals in industrial facilities, and aims to contribute to the development of environmentally friendly regenerated cement using construction waste.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.502-510
• /
• 2021

Hierarchically porous carbon materials with high nitrogen functionalities are extensively studied as high-performance supercapacitor electrode materials. In this study, nitrogen-doped porous carbon textile (N-PCT) with hierarchical pore structures is prepared as an electrode material for supercapacitors from a waste cotton T-shirt (WCT). Porous carbon textile (PCT) is first prepared from WCT by two-step heat treatment of stabilization and carbonization. The PCT is then nitrogen-doped with urea at various concentrations. The obtained N-PCT is found to have multi-modal pore structures with a high specific surface area of 1,299 m² g^-1 and large total pore volume of 1.01 cm³ g^-1. The N-PCT-based electrode shows excellent electrochemical performance in a 3-electrode system, such as a specific capacitance of 235 F g^-1 at 1 A g^-1, excellent cycling stability of 100 % at 5 A g^-1 after 1,000 cycles, and a power density of 2,500 W kg^-1 at an energy density of 3.593 Wh kg^-1. Thus, the prepared N-PCT can be used as an electrode material for supercapacitors.

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.44-49
• /
• 2010

태양전지산업으로부터 배출되는 Si waste로부터 탄소환원법을 사용하여 SiC 분말을 제조하였다. 태양광 산업의 실리콘 웨이퍼 가공 공정에서 다량의 실리콘 및 오일 포함된 폐액이 발생한다. 환경과 경제적인 측면에서 폐액으로부터 실리콘 성분을 재회수하는 기술의 개발은 매우 중요하다. 본 연구에서는 폐 실리콘를 milling하여 나노화한 후 카본 블랙과 혼합하고 진공분위기에서 $1,350^{\circ}C$로 열처리하여 100 nm크기의 균일한 입도를 갖는 SiC 분말을 제조하였다. 폐실리콘과 생성물의 물리적 특성을 SEM, XRD, 입도분석 그리고 원자 흡수 분광기를 사용하여 분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.135-143
• /
• 2015

본 연구는 반탄화 목분과 정수기 필터용 폐활성탄 분쇄물을 혼합한 혼합물을 연료로 사용하였을 경우의 그 연료적 특성을 평가하고자 하였다. 반탄화 목분은 국산 범용수종인 졸참나무와 소나무를 이용하여 급속으로 목재칩 열가공처리가 가능한 wood roaster를 이용하여 처리하였으며 처리조건은 $200^{\circ}C$에서 각 300 s, 450 s, 600 s를 적용하였다. 이때 폐활성탄과 반탄화 목분의 혼합비율은 중량대비(wt%) 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40, 80 : 20으로 하였으며, 이에 대한 연료적 특성에 평가를 위해 발열량, 원소분석, 회분함량 등을 측정하였다. 그 결과는 다음과 같다. 1. 동일시간, 온도 등의 wood roasting 처리조건에서 소나무가 졸참나무에 비해 탄소함량이 더 높았으며, 이는 낮은 온도와 짧은 시간에 최적 탄화도를 나타냄으로 소나무가 효율적인 반탄화 작업이 가능함을 알 수 있다. 2. 반탄화 목분 및 무처리 목분의 폐활성탄 첨가율이 증가할수록 총발열량 값은 급격히 증가하였고 회분함량 또한 증가하였다. 3. 반탄화 목분과 무처리 목분에 폐활성탄을 혼합한 경우에는 두 조건 모두 첨가율에 따라 총발열량은 증가하지만 무처리 보다는 반탄화 목분 그리고 졸참나무보다는 소나무가 더 높은 총발열량을 나타냈다. 4. 폐활성탄을 목분과 함께 혼합물의 원료로 사용하기 위해서는 $800^{\circ}C$, 4시간 연소조건 이상의 고온 연소조건이 필요하다고 판단된다. 이는 $800^{\circ}C$, 4시간 연소조건에서도 완전연소가 되지 않고 회분상태로 잔류하는 함량이 매우 높기 때문이다. 5. 또한 무처리 목분과 반탄화 목분에 폐활성탄을 혼합한 조건 중 무처리 목분에 폐활성탄을 혼합하는 조건이 총발열량의 증가율이 더 높게 나타났으며, 이러한 현상은 소나무보다는 졸참나무가 더 명확하게 나타났다. 최적 회분함량의 폐활성탄 첨가비율은 소나무 무처리 목분에 총 중량대비 5% 이상, 10% 미만의 조건이며 이는 1급 펠릿에 해당되는 0.7% 미만의 기준을 만족하는 것으로 나타났다.