• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1717-1722
• /
• 2021

This study is devoted to the ability of carbon fiber material samples impregnated with various amounts of barium iodide and triethylenediamine to remove radioactive methyliodide from air streams. The main sorption characteristics of impregnated UVIS® carbon fiber were determined and the use of this material for purifying of technological gas flows at nuclear power plants was evaluated. The methyliodide trapping efficiency by samples impregnated with barium iodide, TEDA, and their mixture was 83.4 ± 0.8%; 93.1 ± 0.6% and 93.5 ± 0.7% respectively, under the same conditions. The study established a significantly higher capacity (8.3 ± 0.07 mg/cm²) of samples impregnated simultaneously with both chemical compounds toward methyliodide. Under the same test conditions, the values of this parameter for the samples impregnated separately with TEDA and BaI₂ were 2.85 ± 0.05 mg/cm² and 0.86 ± 0.04 mg/cm², respectively.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2016

In this article, the foamed body of glass was manufactured from the waste borosilicate glass produced by wet pulverization process without additional pretreatment which can be used as a recycling method for waste LCD panel glass. Each 100 g of pulverized waste borosilicate glass with the size of less than 270 mesh were mixed with 0.3 weight fraction of carbon and 1.5 weight fraction of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ and let them foamed for 20 minutes at $950^{\circ}C$ to manufacture the foamed body having the density of less than $0.3g/cm^3$. Additionally, adding $SiO_2$ or $H_3BO_3$ to the mixture enabled the foamed body to have efficient formation of open pores which showed the possibility for producing the foamed body with new functionalities such as sound absorption.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.50-57
• /
• 2021

In this study, the engineering charateristics of recycled cold asphalt mixtures using waste glass and red mud were examined as part of the development of low carbon road pavement materials using large amounts of waste. It also examined the satisfaction of the performance criteria specified in the standard. As a result of the study, it was found that RCA using waste glass were not met standard of GR since strain resistance reduced. Therefore, it has been shown that improvements in the composition of the mixture are needed. It has also been shown to significantly improve the performance of the mixture when adding red mud. In addition, it was found that the quality standards for stability, flow value, indirect tensile strength and tensile strength ratio as specified by GR are satisfied.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.250-255
• /
• 2005

Trichoderma inhamatum KSJ1, a filamentous fungus, isolated from rotten wood showed high ability to hydrolysis of cellulosic materials. Enzyme productivity by strain KSJ1 was high in the cultivation using carbon sources such as cellulosic materials and lignocellulosic wastes as rice straw and paper waste. In previous study peptone was one of optimum organic nitrogen sources in producing cellulases for saccharification of food wastes. However, it was too expensive using peptone as organic nitrogen source, so, in this study, soybean and yeast were applicated to substitute peptone. Yeast showed producing high enzyme activity, so it was estimated that yeast is available in producing cellulase using Trichoderma inhamatum KSJ1 at industrial Production.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.58-63
• /
• 2012

CFRP chip is the byproduct from carbon fiber reinforced plastic (CFRP) processing. CFRP chip is not simply a waste mainly composed of fine carbon fiber and epoxy resin. CFRP chip keeps matrix to maximize their reinforcing effect. To obtain a uniform length of carbon fiber in CFRP chip, chip was chopped ina mortar. CFRP chip should be purified to get better interface adhesion. Epoxy resin on the carbon fiber was removed by $H_2O_2$ surface etching treatment. Optimal dispersion and fabrication conditions of CFRP chip embedded in phenolic resin were determined by thermal stability for fire retardant applications. CFRP chip-phenolic composite exhibits better mechanical and thermal properties than neat phenolic resin. Surface condition of CFRP chip-phenolic composite was evaluated by static contact angle measurement. Contact angle of CFRP chip-phenolic composite was greater than neat phenolic due to heterogeneous condition of fine carbon fibers. From the evaluation for fire retardant (ASTM D635-06) test, thermal stability of CFRP chip-phenolic composite was found to be improved with higher concentration of CFRP chip.

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.745-756
• /
• 2023

Growing stringent global regulations in Korea poses a threat to corporate sustainability. Companies must respond strategically to navigate these regulations and avoid greenwashing. Objective of this research was to analyze how Korean companies are responding to the global trend of reducing plastic use and propose improved management strategies. Seven indicators were developed to assess companies' post-plastic strategies and applied to analyze the sustainability reports of Amore Pacific and LG Household & HealthCare. These indicators included, 1) disclosure of plastic raw materials used by weight or volume, 2) disclosure of recycled plastic raw materials used by weight or volume, 3) disclosure of waste recycling, reuse amounts, and disposal using waste treatment method 4) strategies to reduce environmental impact of plastics, 5) plastic packaging, reduce, recycle, reuse, and composting (in the real environment), 6) plastic management roadmap for the circular economy, and 7) education for sustainable plastic management. Based on the review of considered companies, we propose in-listed sustainable plastics management strategies: disclosing the ratio of plastic raw materials and recycled raw materials for all products, considering recycling rate throughout the product value chain, and not only for the production phase, reviewing carbon dioxide emissions based on life cycle assessment rather than reducing plastic consumption, studying the biodegradability of biodegradable plastics in natural environment such as soil, considering the consumer's perspective.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.259-264
• /
• 2023

As the demand for lithium-ion batteries, a key power source in electric vehicles and energy storage systems, continues to increase for achieving global carbon neutrality, there is a growing concern about the environmental impact of disposing of spent batteries. Extensive research is underway to develop efficient recycling methods. While hydrometallurgy and pyrometallurgy methods are commonly used to recover valuable metals from spent cathode materials, they have drawbacks including hazardous waste and complex processes. Hence, alternative recycling methods that are environmentally friendly are being explored. However, recycling spent cathode materials still remains complex and energy-intensive. This study focuses on a novel approach called solid-state synthesis, which aims at regenerating the performance of spent cathode materials. The method offers a simpler process and reduces energy consumption. Optimal heat treatment conditions were identified based on experimental results, contributing to the development of sustainable recycling technologies for lithium-ion batteries.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.149-158
• /
• 2021

Advances in food packaging play an important role in keeping food manufacturing and food supply safe. Food packaging facilitates the storage, handling, transportation and preservation of food, and also contributes to the minimization of food waste. On the other hand, food packaging materials have high production volumes, short usage times, and accelerate the occurrence of environmental problems related to waste. The circular economy has already been introduced to pursue sustainability through resource conservation and recycling, and to reduce waste and carbon emissions. By activating an eco-friendly economic system that minimizes resource depletion and environmental pollution, reducing, reusing, recycling and redesigning the goals of the circular economy will reduce the impact of food packaging on the environment. This review focused on the safety aspects of recycled food packaging as recycling is currently considered an important means of packaging waste management. Assessing the safety of recycled packaging is very important because recycling can increase the levels of potentially hazardous chemicals in packaging and in the food after they are migrated. Various food packaging materials such as plastic, paper and cardboard, aluminum, steel, and multi-material multi-layers packaging are commonly used, but only the recycling safety of plastic food packaging materials, which is the most used and has a significant increase in post-use problem, is discussed in this review.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.74-83
• /
• 2018

This study conducted the Life Cycle Assessment(LCA) on waste rubber recycling technology for recovering rubber product from the waste tires. Environmental impacts were assessed for the five categories of impacts: global warming, resource depletion, acidification, eutrophication, photochemical oxide production, and ozone layer depletion. When recycling 1ton of waste tire containing rubber, global warming impact was 1.77E+02 kg $CO_2-eq.$, resource depletion impact was 1.23E+00 kg Sb-eq., acidification impact was 5.92E-01 kg $SO_2-eq.$, eutrophication impact was 1.23E-01 kg $PO{_4}^{3-}-eq.$, photochemical oxide production impact was 3.42E-01 kg $C_2H_4-eq.$, and ozone layer depletion impact was 1.87E-04 kg CFC11-eq. In terms of overall environmental impacts, carbon, softener and electricity the greatest impact, so it is necessary to compare the environmental impacts of the raw materials to replace carbon and softener, and a method to reduce the filler usage in the process is needed. In addition, it is necessary to improve energy efficiency, change to low-energy sources, and apply renewable energy.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.