• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.26-34
• /
• 2018

This research is a pre-research to find out profit module of 20 students in a classroom. I researched the widths of passages in the 30 classrooms of 5 elementary schools in Nothern Kyeonggi-do. I found the conclusions as follows. 1st, the area of 1 student's unit is $650(W){\times}950(D)$ 2nd, most of classrooms' students table placements are one-way types(77%). U-types are 13%. group study-types are 7% 3rd, The width between blackboard and front student's table is 2.08m. The width of passage between back seat and backboard is 1.12m. The width of passage between side wall and near student's table is 0.89m. The width of passage between window and near student's table is 0.74m. The width of vertical passage(A) between student's tables is 0.68m. The width of vertical passage(B) between student's tables is 0.7m. 4th, The area of teachers' is $2.1m{\sim}2.25m{\times}2.1m=4.41{\sim}4.73m^2$

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.9
• /
• pp.55-66
• /
• 2018

This study aims to propose color affective model of indoor space by evaluating subjects' physiological responses according to the types of behavioral and affective system. 99 subjects(44 females, 55 males) in their 20s, who had no disorders in visual perception, participated in the experiment. To categorize the subjects based on behavioral and affective system, BAS/BIS scale and Affective scale were used. Color stimuli were composed of five basic colors and three tones: vivid, pale and dull tone of R, Y, G, B, P. For physiological experiment, right and left prefrontal alpha activity was measured to analyze prefrontal EEG asymmetry. Participants were exposed to fifteen color stimuli for 20 seconds each other under the positive and negative emotional condition in a research room with the natural light blocked. The results and conclusion of this study are as follows. Along with factors of behavioral and affective system, cluster analysis was carried out and four types were classified. Type A had high BAS sensitivity, especially high 'drive' trait, and showed high levels of 'anxiety' and 'anger'. Type B had low BAS sensitivity, especially low 'fun seeking' and low 'drive' trait, and showed low levels of 'anxiety' as well as low levels of 'happiness'. Type C had low BIS sensitivity and showed high levels of 'happiness' and low levels of 'sadness'. Type D had high BIS sensitivity and showed high levels of 'lethargy' and 'sadness'. As a result of EEG signal analysis of color stimuli, Type B, Type C, and Type D showed significant differences in prefrontal alpha asymmetry under the negative emotional stimuli. Type B showed more left prefrontal activation in the spaces with pale R and dull G. Type C showed more left prefrontal activation in the spaces with vivid Y and B, pale R, and dull R, G, P. Type D showed more left prefrontal activation in the spaces with vivid Y and P, pale R, Y, P, and dull R, Y, G, B, P. The group of high BAS sensitivity was not influenced by color stimuli under the emotional conditions, whereas the group of high BIS sensitivity was affected by color stimuli under the negative emotional conditions. They showed left prefrontal activation when they were exposed the spaces with vivid, pale, dull tones of Y and P wall.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.173-182
• /
• 2018

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field. As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler. To propose the design technique and the execution manual of the high efficiency dredging material transport technic, this research have confirmed flow status changing depending on a soil material kind under electro-magnetic field and analyze the effect of electro-magnetic field which affects to each dredged soil material transportation. For achieving this research, EMF(Electro-Magnetic Field) generator is installed on the dredger(20,000HP) and through monitored flow status, dredging soil flow rate and sampled material specification is confirmed. Also dredger operating condition is measured and dredger power for soil transportation, hydraulic gradient and flow rate are compared, as transportation efficiency is calculated by this parameter, it is possible to check transportation efficiency improvement depending on each dredged soil material under electro-magnetic field. To verify the technique of dredged soil transfer using electromagnetic field, which is the core technique of the high efficiency dredged soil transfer, and the technique of expert system for pipeline transfer and the flow state. This could lead to a verification of transfer efficiency according to the characteristics of the dredged soil (sand, clay, silt) and the transfer distance (5km, 10km, 15km), which is planned to be used for a technology development of pump power reduction and long-distance transfer applying the high efficiency dredged soil transfer technology.

• Journal of Korean Living Environment System
• /
• v.24 no.5
• /
• pp.654-664
• /
• 2017

The use of environmentally friendly finishing materials allows us to create a space where we can feel nature and to have stability and peace in the city center. In this paper, we examined the sensitivity of people to the three café spaces where wooden finishing materials are used in the space elements that change according to people's demands for environmentally friendly space due to pollution of living environment. First, we examined the wood and finishing materials and emotional vocabulary through literature review and previous research. Second, the values of L ^*, a ^*, b^* and sR, sG and sB values were extracted by using a line spectrophotometer (Ci6X). Third, we conducted a 7 - point scale questionnaire based on the extracted 13 pairs of emotional vocabulary. Using SPSS 21, frequency analysis by descriptive statistics, crossover analysis by visiting purpose and intention, and emotional lexical factor analysis were performed. Through the study, the following points were found. First, CB (The Coffee Bean), SB (Starbucks) and HS (Hollys Coffee) showed differences in CB (65%), SB (40%) and HS (37%) in the spatial analysis. Second, CB gave color similar to the color of wall and furniture wood, but HS changed the color or brightness of wood finishing color of furniture. HS or SB showed favorable use of wood color scheme. Third, SB (26.3%) and HS (19.7%) were selected by taste. Fourth, there were differences in the items of CB, 'local-exotic' and SB 'dark-bright' in the factor value. The use of wood finishing materials differed in the atmosphere evaluation depending on the spatial factors and the color of the furniture. However, in this study, there are many factors that are insufficient in the accuracy of the ratio of the applied wood finishing material to the space element and the amount of the survey. If we further study the evaluation of emotional image according to the ratio of wood finishing materials, we think that it is necessary to study now that interest in environmentally friendly is increasing.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.803-811
• /
• 2024

Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Korea Science and Art Forum
• /
• v.37 no.1
• /
• pp.249-260
• /
• 2019

Recently, the proportion of single-person households is on the increase in Korea, expected to reach 34.6% in 2035. Among the single-person households, Young single family households are facing greater difficulties due to high house prices in Korea. The government is expanding its support to Young single family, executing various policies such as public lease housings, private lease housings for youth, youth dormitory, etc. The purpose of this study is to understand the exact housing requirement of Young single family households who have different lifestyles with other age groups and provide base line data for youth house planning which will be in use later on. Study methods are shown below. First, this research studied the status and characteristics of Young single family households by looking into literature. Second, by studying previous studies concerned with life style and housing preferences of youth, the tool for investigating preferences and needs of housing environment by Young single family households was composed. Third, survey on characterstics of space usage, preferences and needs on flat composition, and preferences of interior design were conducted based on lifestyle of Young single family-households. The survey was conducted as an online survey using SNS for 150 Young single family holds from the age of 20 and 39, including students and office workers from December 2018 to January 2019. The results are as following. (1) Looking into the space usage characteristics, considering that various activities other than basic functions take place in bedroom and living room of small-sized Young single family households, we need to consider this additionally when planning the housing. (2) Looking into the preferences and composite needs of flat composition, the subjects demand separate bed room and more living room space, and also demand expansion of living room space where various activities take place and additional storage such as dress room in bed room (3) The preferences toward interior design show preferences toward modern style and achromatic color, a representative color. The subjects also prefer floor finishing materials normally used for living spaces, and indirect, soft lighting that uses wall. Also, there are differences between interior design preferences between students (20's) and office workers(30's) due to their different lifestyles. Research is needed to propose practical residential environment requirements and plans through a case study of actual public rental housing and a wider range of users.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.1
• /
• pp.76-89
• /
• 2012

This study aimed at carrying out a semantic interpretation of the core Design language that seemed to influence deeply in the creation of the ChwuiseokJeong wonlim of Gochang. Especially, this paper aimed at inferring how the spiritual culture of seclusion of the 16th century influenced the creation of the wonlim by understanding the metaphor and symbolism by grasping the transmission meaning and reception meaning of the creators and the people concerned with keywords like Eunil(隱逸: seclusion), Chwuiseok(醉石), and Chilseongam(七星巖). 'Building up a wall' was intentionally carried out in order to represent 'Seven Stars(The Big Dipper)' inside of the wonlim. This is a kind of two-dimensional 'enframement', and a result of active creation of a meaningful landscape. From Chilseongam that was created by assembling, we presumed that Kyung-Hee Kim, Nohgye(蘆溪), the creator showed the recognition and thoughts of astronomy as a Confucian scholar that the ChwuiseokJeong Wonlim where he secluded is the center of the universe. The interpretation of words in Nohgyezip, an anthology, showed that the articles and writtings of Nohgye, his decsendants, and the people of ChwuiseokJeong included alcohols, Chwuiseok, Yeon-Myung Do, and Yuli(栗里) where Do secluded; this means that Nohgye ranked himself with Do because Nohgye also lived in peace by drinking alcohols and enjoying nature like Do did. 'Drinking' was what expressed the mind of Nohgye who wanted to be free and have the joy of enjoying mountains, water, and their landscape like Do did. In other words, 'Drinking' is the symbol of freedom that makes him forget himself and equate himself with nature. These are the representation, imitation, and mimesis of respecting Yeon-Myung Do. As the alegory of 'speaking something with other things' suggested, it is possible to read 'Chwuiseok', came from the story of Yeon-Myung Do, in multiple ways; it superficially points out 'a rock on which he laid when he was drinking', but it also can be interpreted as 'an object' that made him forget his personal troubles. In addition, it means freewill protecting unselfish mind with the spiritual aberration of drinking, 'Chwui(醉)', mentally; also, it can be interpreted metaphorically and broadly as a tool that makes Nohgye reach to the state of nature by the satisfied mind of Yeon-Myung Do. 'Chwuiseok' was a design language that showed the situation of Nohgye by comparing his mind with the mind of Yeon-Myung Do from the Confucian point of view, and a kind of behavioral mimesis based on his respect to Do and 'aesthetic representation of objective reality.' It is not coincidental that this mimesis was shown in the engraved words on Chwuiseok and the creation of ChwuiseokJeong that has the same name with Chwuiseok in Korea and China.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.85-96
• /
• 2018

Developed nations have implemented various policies to reduce greenhouse gases since the 1997 Kyoto Protocol in order to minimize the effects of global warming. Korea should also reduce energy consumption in the industrial sector, and the transportation and building sectors in order to achieve its greenhouse gas reduction target of 37 percent compared to the Business As Usual levels. The government implements various laws and regulations for reducing energy consumption. To reduce energy consumption in the building sector, in particular, the Energy Conservation Design Standards are enforced according to the 'Enforcement Support for Green Building Construction'. The amount of electricity used to maintain room temperature at $28^{\circ}C$ in these buildings have a 30% reduction (measured on the walls and rooftop) in power usage compared to buildings not required to meet these standards. Although the effect of these energy savings on landscaping is proven, this demonstration is not effective for energy saving since it is not a suitable method for the 'Energy Saving Design Standards of Buildings'. For landscaping to be effective as far as a component of energy reduction, the perfusion rate of the building should be calculated based on the thermal conductivity of the component materials for the energy saving designs with respect to the basis of Article 14 of the Green Building Act. Therefore, the purpose of this study is to ensure that the planting-based mats currently being widely used in the landscape industry can have insulating performance suitable for the 'Energy Saving Design Standards' of Buildings according to the 'Enable Green Building Construction Methods'.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.45-66
• /
• 1997

This thesis is a study on the kaftan styles iin Asia. The purpose of he study was to examine the origin o the kaftan concentrating on the history and cultural backgrounds of nomads in he Western Central and North Eastern Asia. Secondly for more thorough study and expla-nation on how these kaftans contributed to East-West trade along the silk road. wall paintings and miniature illuminations along Oasis roads persia and Saracen period were compared, Also real kaftans were compared and analyzed the characteristics of Western (Turkey palestine) Central(Kazakistan Uz-bekistan Tadzhistan Qyrgyztan Turkmenistan) and the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the style classifications according to their peculiarities of the various kaftans as well as how kaftan gave important influences on custumes of different religious sects. The kaftan is a long coat-like garment with front openings fastened with long sash having an extra long sleeves which were worn by middle and high class nomadics throughout the West Central and North Eastern Asia This type of kaftans were a basic clothing for nomadics since they were constantly moving fromone to another areas on their horse back riding. They also wore tight trousers with boots. Kaftans seem to be originated from nomads of Steppe around B.C. 800 On B. C 400 west asian areas such as Solokha Kul-oba Kulogan had pictures sculptues on vases showing kaftans of half coat type length with front opening tied with band. Also the materials used were the products of animals such as wool or felt with animal designs showing Scythian nomads. In the North Eastern Asia Hsiung-Nu were active in Kazakha North Altai and Mongol The Clothing and fabrics exfavated near Noin-ula Pazyrik showed many samples of kaftan with trousers with other interment be-longings with a corpse around B.C 300 to A. D 100 when trades along the silk roads were proven by many historians Kaftans excavated in this area wore red front opening silk materials which suggesting settling down of nomads. in he central Asia Dol-gull near Altai mountain area were mainly miners who later had many trades with Persia and Bizantine. After Dol-gull Bezeklik temple Samarkant Kizil cow Budda sculture wall paintings of Astana tomb showed typical kaftan of this re-gion. These were both hip covered length as well as long coat with narrow sleeves. Es-pecially they had different color band fron the main kaftan with grogeously and splendously designed silk. In perusia during A. D 1400 to 1600 minia-ture illumination showed kaftan as a high class symbol more than clothing purpose. They had best quality silk with extra long sleeves draping and had a layers of kaftans one on top of anther as a symbol of wealth These Kaftans with different colors and designs were even more beautiful with their effective combinations and contrast of colors. On the other hand the lower class common people and servants wore simple kaftan with the front part of the kaftan were slipped into the belt in order to be more active and con-venient to work, The real kaftans discovered at Topkapi Saray palace of Turkey from A. D 1300 to 1900 were also compared. These kaftans were very numerous in numbers as well as designs The materials and designs used were also vari-ous such as Chinese to Italian silk. The shaped and pattern itself were not much different from the previous nomad's Kaftans. The Palestian kaftans remained were from the beginning of 19th and 20th century. Since this area is hot and dry desert they used black and navy blue colors mostly in order to exclude the sun lights. The patterns used were similar to Nomads and Bedouin with cross stiches and patch work decorations. In the central Asia they had similar life style and natural environmental cnditions with Turkish tribe which resulted in similar kaftan styles as nomads. Mongols conserved basic patterns of kaftan since Cinggis Khan with deep folding in order to keep warm. At last the kaftans studided in this thesis were classified in to four such as half coat long coat jacket and vest style. A pattern used in the Central Asia were zigzag and ani-mal design whereas in the West Asia were floral plant arabesk and circle pattern. As I discussed previously kaftan styles of nomads in the Asia maintained its basic pat-tern throughout the history except slight changes in color gusset sleeve shapes. These slight changes were made according to the need to adapt the need of environmental natu-ral conditions, The reason for aboriginality of kaftan in Asia was its simplicity and con-venience Most interesting fact is that for all these years Mongols are still wearing kaftan in their life ensuring us that they art the preserves of old kaftan. Since this thesis dealt enormous Asian regions I had a limitation of not being able to cover the Far Esatern asian areas such as Korea China and Japan how these kaftans were influenced in their clothing history as well as Eastern and Western culture. This topic along with the studies on materials and designs of patterns of kaftan will be another research project in the future.