• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.553-557
• /
• 2013

Roof and exterior wall are designed and constructed in a manner that prevents the accumulation of water within the wall and roof assembly in the formal building. However, in a freeform building there is no clear distinction between exterior wall and roof. In other words, the exterior walls and roof systems of the freeform building are integrated as a surface, unlike the formal building envelope. Therefore, freeform architecture needs a systemized envelope design method to perform functions of exterior wall and roof. However, in many cases, construction methods for roof and exterior wall are applied to freeform buildings without necessary alterations, which lead to incomplete design, leakage, cracks and other problems. Freeform architecture is thus designed and constructed differently from formal buildings. In order to more easily and inexpensively actualize freeform architecture, Building Information Modeling (hereinafter referred to as BIM) has recently been applied in the construction industry. The studies and case analysis are not sufficient to identify the implications and contributions of freeform buildings in future similar projects. Therefore, this research will study design and construction methods for freeform surfaces. This study attempts to analyze the pros and cons of each method for the concrete surface frame, and then presents the panel options for envelope system of the freeform architecture.

• 농촌계획
• /
• 제18권4호
• /
• pp.61-67
• /
• 2012

Recently, brick walls are being widely introduced in rural areas. Walls are a very important design element of space. However, most brick wall works do not consider the human psychological characteristics. The purpose of this study was to investigate psychological characteristics on brick wall bonds such as the stack bond, running bond, english bond, flemish bond, america bond. The results of the research can be summarized as follows: 1)There is no statistical difference of psychological evaluation results among student groups using the semantic differential scale method using 10 adjectives. 2)Stack bonds have an uninspiring, artificial, simple, restful, boring and ordered psychological characteristic. Running bonds have an uninspiring, restful and ordered psychological characteristic. America bonds have a unique and modernistic psychological characteristic. English bonds have a unique, modernistic, complex and chaotic psychological characteristic. Flemish bonds have no critical psychological characteristics. 3)The running bond earned the highest score in preference, while the stack bond scored the lowest. Employment of brick wall bonds on this study was not highly preferred, hence it is necessary to develop a new brick wall bond design. 4)In conclusion, the proper selection of brick wall bonds is very important and we should consider human psychological characteristics in the design of rural areas.

• Structural Engineering and Mechanics
• /
• 제68권2호
• /
• pp.237-245
• /
• 2018

This study proposes an empirical formulation to predict the maximum deformation of offshore blast wall structure that is subjected to impact loading caused by hydrocarbon explosion. The blast wall model is assumed to be supported by a simply-supported boundary condition and corrugated panel is modelled. In total, 1,620 cases of LS-DYNA simulations were conducted to predict the maximum deformation of blast wall, and they were then used as input data for the development of the empirical formulation by regression analysis. Stainless steel was employed as materials and the strain rate effect was also taken into account. For the development of empirical formulation, a wide range of parametric studies were conducted by considering the main design parameters for corrugated panel, such as geometric properties (corrugation angle, breadth, height and thickness) and load profiles (peak pressure and time). In the case of the blast profile, idealised triangular shape is assumed. It is expected that the obtained empirical formulation will be useful for structural designers to predict maximum deformation of blast wall installed in offshore topside structures in the early design stage.

• 한국실내디자인학회논문집
• /
• 제33호
• /
• pp.19-26
• /
• 2002

This study analyzed the characteristics of spatial expression in the Barcelona Pavilion to be based on tectonics. Mies pointed out the image of materiality about the material rather than the process of tectonics using the material, and he also expressed demateriality in the image of each material through the reflection. To be liberated from structural matters, the wall has been introduced. He intended to show the design plan as the independent structural system, however, the wall actually seems to be supporting the roof that shows rather clearly self-contradictory because of the expression of materiality in the material. In terms of architectural elements; wall, roof, column, floor, and so forth, tectonic expression and abstract aesthetics stands face to face, because of hiding the productional process and transforming to line and surface in the image of materiality. The interior of the glass wall seems fairly closed space from the exterior, because materiality and reflection of materials of columns and podium. The character of experiential space is inconsistent and fragmentary because of the splendid images from maternality and reflection on the wall, and collision with the reality and the image the wall reflects, even though the geometrical space of the Pavilion's plan has the mutual penetrability and organic character.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.230-242
• /
• 2012

Recently the Permanent Uni-wall System (PUS) has been developed which improved the disadvantage of the Cast-In-Place Concrete Pile (CIP) and could be used as permanent retaining wall. In this study, joints between PUS and floor systems were developed. From analyses of the characteristics of design and construction of PUS, shear friction reinforcements with couplers were adopted for shear design of the joints. Twelve types of joints were developed which were classified according to the types of floor structures, wale, and piles of PUS. Two typical joints were tested and the joints showed satisfactory behaviors on the points of shear strength, stiffness, and serviceability. Especially the shear strengths were much higher than the design strengths due to the shear keys which were by-products in splicing shear reinforcements. However, the shear strength of the joint is recommended to be designed by only shear friction reinforcement because shear key is not reliable and too brittle.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.31-42
• /
• 2019

In this study, the results of an analytical investigation on the seismic behavior of two residential 4-story bearing wall buildings with pilotis, each of which has symmetric or unsymmetric wall arrangement at their piloti level, are presented. The dynamic characteristics and lateral resistance of the piloti buildings were investigated through linear elastic and nonlinear static analyses. According to the results, the analytical natural period of vibration of the piloti buildings were significantly shorter than the fundamental period calculated in accordance with KBC 2016. In the initial elastic behavior, the walls resisting in-plane shear contributed to the lateral stiffness and strength, while the contribution of columns resisting flexural moments in double curvature was limited. However, after the shear cracking and yielding of the walls occurred, the columns significantly contributed to the residual strength and ductility. Based on those investigations, design recommendations of low-rise bearing wall buildings with piloti configuration are given.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.755-767
• /
• 2018

This paper uses a finite element based approach to provide a comprehensive understanding to the behaviour and the design performance of buried uPVC pipes with different diameters. It also investigates pipes with good and poor haunch support and proposes minimum safe wall thicknesses for these pipes. The results for pipes with good haunch support showed that the maximum pipe wall stress and deformation increase as the diameter increased. The results for pipes with poor haunch support showed an increase in the dependency of the developed vertical displacement on the haunch support as the diameter or the backfill height increased. Additionally, poor haunch support was found to increase the soil pressure, with the effect increasing as the diameter increased. The design of uPVC pipes for both poor and good haunch support was found to be governed by critical buckling. A key outcome is a new design chart for the minimum wall thickness, which enables the robust and economic design of buried uPVC pipes. Importantly, the methodology adopted in this study can also be applied to the design of flexible pipes manufactured from other materials, buried under different conditions and subjected to different loading arrangements.

• 한국조경학회지
• /
• 제30권1호
• /
• pp.44-51
• /
• 2002

The objective of this project is to improve the environment of the estuary dike on the Youngsan-River through Re-landscaping. An estuary dike of the Youngsan-River, the largest in the Orient, was constructed in 1981 and connects Mokpo City and Youngam-Gun province. Twenty years ago, when this dike was completed, this place was one of the famous tourist attractions of Korea. It symbolized the development and growth of Korea. But this dike at present is only a dreary sight as a huge concrete construction element. Therefore, a wall painting on the estuary dike was planned to improve this image. The site, an estuary dike of the Youngsan-River, is located in Mokpo City and its length is about 1,360m. The planning focus of this re-landscaping, which is a proposed improvement design through the analysis of characteristics and problems in conventional facilities, is as follows: (1) Introduction of a wall painting that is a symbol of the sea and river (by the creation of an illusion), (2) Production of the wall painting which is under consideration to create a friendly atmosphere of the circumference view and (3) Preparation of a design to establish an approach to the waterfront. By following these steps, an estuary dike can function as a tourist attractions and can be transformed in to cultural space for civilian. This project is good example of environment design that is completed with the regional residents participation through community input in the planning and initiation of a wall painting. The concept of environment design which involves the residents participation and re-landscaping in Korea has not been established up to now on. However, as this projects has proven, consideration for regional residents is a very important factor for the administrative office and planing specialist to address. In the future, it will have a direct influence on the development of design planning. If the establishment of space that can be accepted by residents with love, affection and self-confidence is possible, environment design in which residents participate actively, can be realized.

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.530-539
• /
• 2002

전단벽의 연성도 확보를 위한 단부횡보강 설계에 있어서, 현재 설계기준들은 경험적이며 강제적이다. 즉, 현재 설계기준은 연성도 요구량에 관계없이 단부횡보강영역과 상세를 정해 놓고 있으며, 따라서 성능기초설계에 부적합하다. 본 연구의 목적은 성능기초설계에 적합한 전단벽의 연성도 설계방법을 개발하는 것이다. 단부횡보강영역에 따른 전단벽의 연성도변화를 조사하기 위하여 실험연구를 수행하였으며 압축대를 모델링하기 위하여 각기 다른 횡보강영역을 갖는 시험체에 편심축하중을 가력하였다. 실험연구를 통하여 횡보강된 벽체 압축대의 강도, 연성도, 파괴모드 등을 연구하였으며, 벽체 단면 전체에서 단부 횡보강으로 인하여 발생하는 연성도 및 파괴시점을 조사하기 위하여 비선형 수치해석을 수행하였다. 실험과 해석연구 결과를 기반으로 하여 전단벽의 연성도 설계방법을 개발하였다. 제안된 설계방법을 이용하여, 주어진 연성도 요구량에 맞게 단부횡보강영역과 횡보강량을 정확히 결정할 수 있으며, 따라서 벽체의 연성거동을 보장하는 동시에 경제적인 벽체설계가 가능하게 되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.201-209
• /
• 2002

Crib wall system은 일반적으로 segmental crib type의 옹벽형식으로 stretcher라는 전 후면 가로보와 세로 방향으로 header라는 버팀보를 연속적으로 쌓아 올리는 공법이다. 이때, stretcher와 header로 구성된 골격 내부에는 흙으로 속채움을 하여 다져, 본 구조체가 일체거동이 가능한 강성체(rigid body)를 형성시킴으로써 배면의 토압에 대하여 저항하는 구조물이다. 따라서, 안정성 해석은 일반적으로 기존의 철근콘크리트 옹벽과 같이 전체 옹벽이 하나의 강성체로 작용한다고 가정하여 토압이론에 의하여 평가하고 있다. 그러나, 변형문제에 있어서 본 구조물은 단순히 하나의 구조체로 가정하여 해석하기가 곤란하다. 왜냐하면, stretcher와 header는 일반 보강토옹벽의 전면 벽체 부재와는 달리 뒷채움재 내에 어떠한 인장 보강재도 삽입되지 않기 때문에 독립된 변위거동을 나타낸다. 또한, 각각의 독립부재로 구성된 재료와 내부채움재의 힘과 변형은 3차원적으로 거동하며 수평토압에 의하여 복합적인 상호거동을 일으키기 때문이다. 따라서, 본 연구는 Crib wall system의 변위경향을 보다 엄밀하게 해석하기 위하여 Brandl(1985)의 full scale 시험 결과를 바탕으로 수치해석 모델을 제시하였다.