• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.46-57
• /
• 1996

The direct injection stratified charge(DISC) engine enhances the fuel tolerance and the antiknock tendency. This enhanc3d antiknock tendency allows use of a higher compression ratio which results in higher thermal efficiency. But its actual utilization is prevented by high emission combustion time and wall quenching will be the main causes of increasing unburned hydrocarbons in DISC system. In order to solve this problem, small aount of hydrogen was added to the charging air or injected fuel. The effects of hydrogen addition were examined experimentally by radial fuel injection using a pancake-type constant volume bomb. In case of the hydrogen addition to the charge of air, the combustion the amount of hydrogen. In case of the hydrogen addition to the fuel, the combustion pressure was significantly increased.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.469-478
• /
• 2010

Fire resistance of new hybrid timber framed wall systems was evaluated in this study. These wall systems are composed of two major structural parts. One part is a heavy timber frame part designed to take charge of whole vertical load using heavy timber post and beam, and the other is an infill wall structure, designed to take charge of whole horizontal load and to provide an established level of fire resistance. A basic concept of this hybrid wall is adopted from a typical furniture structure with frame. A timber post and beam frame is constructed with Japanese Larch solid timber post(180mm by 180mm) and beam(180mm by 240mm). As infill wall systems, two types of walls are applied. One is a typical light timber framed wall with solid blocking and another is a structural insulated panel wall, in which polystyrene insulation is filled between two structural panels to make single structure. For all tested walls, two layers of 12.5mm thick type-X gypsum boards are used on fire exposed side. Prior to tests for hybrid walls, only infill walls are tested without heavy timber frame. All fire resistance tests are carried out in accordance with KS F 2257, and temperatures on several points within wall structure and unexposed wall surface are measured during fire tests. It is considered that the reinforcement of heavy timber frame is significantly efficient for improving the fire resistance of timber framed walls.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.209-216
• /
• 1999

In tunneling and road cuts by blasting, it is of the utmost importance that the remaining rock is of high quality in order to avoid rockfall, rockslides and excessive maintenance work. Therefore, numerous blasting techniques which make use of decoupled charge or shock wave superposition effect have been used to control overbrake. In this paper. some approximate method for the determination of blast load according to the charge condition was introduced at first and, instrumented tests were conducted in small scale transparent material to investigate the shape and amplitude of blast load around the bore hole. Compare to the fully coupled charge, low amplitude of blast load around the bore hole was observed in the decoupled charge and explosion gas pressure was important in the shape of blast load. Therefore, quasi-static behaviour of the crack pattern was shown due to low loading rate.

• Childhood Kidney Diseases
• /
• v.19 no.2
• /
• pp.65-70
• /
• 2015

It is well known that proteins present in the primary urine are reabsorbed in the renal proximal tubules, and that this reabsorption is mediated via the megalin-cubilin complex and the neonatal $Fc{\gamma}$ receptor. However, the reabsorption is also thought to be influenced by an electrostatic interaction between protein molecules and the microvilli of the renal proximal tubules. By analyzing the charge diversity of urinary IgG, we showed that this reabsorption process occurs in a cationic charge-preferential manner. The charge-selective molecular sieving function of the glomerular capillary walls has long been a target of research since Brenner et al. demonstrated the existence of this function by a differential clearance study by using the anionic dextran sulfate polymer. However, conclusive evidence was not obtained when the study was performed using differential clearance of serum proteins. We noted that immunoglobulin (Ig) A and IgG have similar molecular sizes but distinct molecular isoelectric points. Therefore, we studied the differential clearance of these serum proteins (clearance IgA/clearance IgG) in podocyte diseases and glomerulonephritis. In addition, we studied this differential clearance in patients with Dent disease rather than in normal subjects because the glomerular sieving function is considered to be normal in subjects with Dent disease. Our results clearly showed that the charge-selective barrier is operational in Dent disease, impaired in podocyte disease, and lacking in glomerulonephritis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.237-237
• /
• 1999

전극폭 300um, 전극간격 100um, 격벽높이 130um로 자체 제작한 테스트 패널에서 방전개시전압과 최소 방전유지전압 사이에서 방전유지전압 변화에 따른 벽전하, 벽전압을 측정하였다. 이 실험에서는 Ne가스와 Ne-Xe 혼합가스를 이용하였다. 이 결과로부터 방전유지전압 변화에 따른 벽전하, 벽전압을 통하여 최적의 방전유지전압 조건을 결정할 수 있으며, 이는 AC-PDP의 효율 향상에 기여할 것으로 판단되어 진다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.715-719
• /
• 1996

Dietary fibers consist mostly of complex carbohydrates such as cellulose, hemicelluloses and pectins, and also included are carbohydrate-based gums or hydrocolloids exampled as alginate, carrageenan, galactomannan xanthan, etc. Due to structural diversity, dietary fibers can be classified by various ways i.e., source, plant function, solubility, charge and topology. Understanding on the plant cell wall structure is of primary importance, since physicochemical properties of dietary fibers are dependent on the existence patterns in the cell wall. Depending on the four distinct observational dimensions, the physical parameters of dietary fibers were discussed in terms of raw sources, bulky & complex plant cell wall materials, individually separated hydrocolloid materials and specifically designed materials. Each existence state possesses the distinct physical parameters governing a variety of physiological properties of dietary fibers.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.368-376
• /
• 2009

Studies on the effect of the wall-ion, wall-water, water-ion and ion-ion interaction on properties of water and ions in nano-channels have been performed through the use of different kinds of ions or different models of potential energy between wall-ion or wall-water. On this paper, we address the effect of water-wall interaction potential on the properties of confined aqueous solution by using the molecular dynamics (MD) simulations. As the interaction potential energies between water and wall we employed the models of the Weeks-Chandler-Andersen (WCA) and Lennard-Jones (LJ). On the MD simulations, 680 water molecules and 20 ions are included between uniformly charged plates that are separated by 2.6 nm. The water molecules are modeled by using the rigid SPC/E model (simple point charge/Extended) and the ions by the charged Lennard-Jones particle model. We compared the results obtained by using WCA potential with those by LJ potential. We also compared the results (e.g. ion density and electro-static potential distributions) in each of the above cases with those provided by solving the Poisson-Boltzmann equation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.155-158
• /
• 2000

Influence of sustain pulse-width on electro-luminous efficiency is experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and rising time of 300 ns has been used in the experiment. It is found that the firing voltage is decreased as the pulse-width is increased from 2 ${\mu}s$ to 8 ${\mu}s$ with sweeping frequency range of 10 kHz to 50 kHz. It has been found that the optimal sustain pulse-width is in the range of $3{\sim}4{\mu}s$ under driving frequency range of 30 kHz and 50 kHz, based on observation of memory coefficient, wall charge, and wall voltage as well as luminous efficiency.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.5-10
• /
• 2011

The spatial fuel vapor distribution of the homogeneous charge by a 6-hole injector was examined in a optically accessed single cylinder direct injection spark ignition(DISI) engine. The effects of in-cylinder charge motion, and fuel injection pressure, and coolant temperature were investigated using a planar LIF (Laser Induced Fluorescence) technique. It was confirmed that the in-cylinder tumble flow played a little more effective role in the spatial fuel vapor distribution than the swirl flow during the compression stroke at 10 mm and 2 mm planes under cylinder head gasket and the increased fuel injection pressure activated spatial distributions of the fuel vapor. In additions, richer mixtures were concentrated around the cylinder wall by the increase of the coolant temperature.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1004-1009
• /
• 2003

Electroosmotic flow induced by an applied electrostatic potential field in microchannel is analyzed in this study. The electroosmotic flow is an alternative to pressure driven flow in microchannels, but the usage has been limited to the simple cases. In this study, We analyze electroosmotic flow driven by inhomogeneous surface charge on the channel wall. The surface charge varies along a direction perpendicular to the electric field in order to generate the electroosmotic flow. A numerical results substantiate the highly efficient mixing performance. It is highly the beneficial to fabrication process since only straight microchannel rather than complex geometry is enough to yield efficient mixing.