This research used a questionnaire to provide basic data for the design of dressing form that enables the manufacture of senior menswear with an improved fit to match the dissatisfaction with the fit of male suits over the 50s. We used 132 questionnaires as analytical data. The results were: The item 'purchasing method of formal suits' showed that 95.5% purchased ready-to-wear jackets. The 'abdominal obesity type' and 'trunk waist type' had a high frequency of 'complaints about the size of the ready-to-wear jacket'. They choose their suits and wear them directly from the store. It is expected that senior males will complain about ready-to-wear formal suits due to the increase in girth item than normal type due to change of body shape since they consider size to also be important when purchasing suits. The most important part of the body when purchasing suits is the shoulder area, followed by the front width and back width of the fit. As for the degree of recognition of suit size, 38.1% said that they know the size and 'Suit size is hard to understand'. As a result of dissatisfaction with formal dressing, the items of 'Neck wide of get loose', 'Drag line of back neck', 'Not fit of front opening', 'Not fit of shoulder slope' and 'dissatisfaction'. Therefore, it is salient to establish suit fitting system and size system for senior men.
Although the pattern development for tight-fitting clothing has been carried out using 3D data on humans, the pattern development using 3D scan data obtained for various postures still remains an interesting subject. In this study, we have developed the 2D pattern using the 3D human body reflecting standing and cycling postures. The 3D scan data of a subject was obtained using Cyberware. 2C-AN program(Triangle simplification and the Runge-Kutta method) was used in the system to reduce the 3D scan data points and to make segmented triangular patches in a plane from 3D data. As results, surface distance and area of each body part of standing and cycling postures were also provided for the future application of the functional clothing construction. The area of center piece on the front (c.front) decreased by $106.45cm^2$(-13.08%) and that of lateral piece(s.back) on the back increased by $144.96cm^2$(18.69%) in the patterns of cycling posture. The girth of neck and waist for the cycling posture increased by 0.88cm (3.92%) and 1.56cm(4.40%) respectively, and the that of thigh decreased by 1.01cm(-2.24%). The differences between the area in the 2D pattern obtained from the 3D scan data and that in the 3D scan surface data for standing and cycling postures were very small($-10.34cm^2$(-0.32%) and $-44.33cm^2$(-1.32%)).
Journal of the Korea Fashion and Costume Design Association
/
v.9
no.1
/
pp.161-171
/
2007
The purpose of this study was to classify the lower body of the lost women and to investigate the three-dimensional characteristics of each lower body somatotype of them. The subject were ninety seven women whose. age were twenties and whose height and bust girth were in the range of mean$\pm1\delta$ of typical body size of twenties' Korean women. The forty one variables of their lower body were measured by Martin's Anthropometric Instrument. And they were analyzed for mean, standard deviations factor analysis, and cluster analysis. In the second phase of analysis, the three participants were re-selected in each type were measured by Sliding Guage and analyzed their lower body somatotype. The results were as follows; The components of lower body of 20s' women were extracted with 7 factors through factor analysis and orthogonal rotation by the method of Varimax. The rate of the cumulative contribution was 84.1% the first factor was the thickness of lower body, the second factor was the vertical size of lower body the third factor was the front shape of hip, the forth factor was the vertical size of hip, the fifth factor was the shape of abdomen, the six factor was the flat-ratio of waist and the seventh factor was flat-ratio of hip. The somatotype of 20's women's lower body can be classified into 3 types. Type 1 is the standard somatotype of 20's women's lower body and the 34.0% of the participants in the study was categorized into type 1. Type 2 is a short and corpulency type with protruded abdomen and hip and the 29.9% of the participants in the study was categorized into type 2. And the type 3 is a tall and thin type with plat abdomen and hip and the 37.1% of the participants was categorized into type 3.
This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.
As directly imported apparel brands are actively entering the domestic market, studies of the marketing aspects of these imported apparel products and their overall consumption trend have been done. However, studies of whether are not the directly imported apparel products provide Korean consumers with an appropriate fit are not as common. Therefore, this study investigates the satisfaction with and problems associated with the fit along with the recognition of and preference for directly imported US apparel brands. 100 female college students who purchased directly imported US apparel brands participated in a survey. The results of this survey showed that their recognition of, preference for, possession rate of and satisfaction with the directly imported US apparel brands tend to be high. The major purchasing motivations were the excellent 'design' and 'color' of the products. The subjects reported that they were satisfied with the quality of 'materials' and 'sewing condition'. However, they were not satisfied with the 'comfort' or the 'size'. Their level of satisfaction with the fit of these products differed depending on the specific item. Their level of satisfaction with the fit of T-shirts and knits was high, whereas the level for pants was relatively low. They complained mostly about the sleeve length and garment length of upper-body garments and coats. They were not satisfied with how the pants fit. The areas of dissatisfaction regarding the pants were the waist girth, the crotch length and the pants length.
This study aims at analyzing the silhouette, dress patterns and detail of Empire Era(1789-1825), and making use of this results for the modern stage costume construction. The dresses of Empire era were divided into X and H style. The results revealed that the bust girth of X style group was bigger than that of H style group. Such patterns as high waistline, puff sleeve, train, etc. which appeared during the peak time of Empire style period were more remarkable for H style group. This obviously indicated that more epical characteristics were observed for H style group than for X style group. Similarly to silhouette analysis, based on the results from cluster analysis conducted to put similar groups together, two groups were formed - a visually differentiated and complex group and a simple group in the absence of detail. Most dress details from Empire period had simple embellishments. Comparison of the average size of the patterns between two groups indicated that waist front length of H style was shorter than that of X style. Front interscye was even greater than back width for both groups. Such trend was quite different from today's pattern in which back width is larger than front width based on body measurements. Preference for big breast during the period was reflected on dress patterns and the side length of front side goes across the back much further for bodice patterns. Two representatives were selected and reproduced using materials similar to those of real dresses of Empire style, following two times fit test.
The purpose of this study lies in examining the characteristics of differentiated body types for plus-size women and obtaining basic data for the wide-ranging choices of ready-made clothing in a consumer's place. The results of this study displayed no significant differences for subjects in their 30s and 40s in comparison to standards by ages but showed a significant difference with subjects in their 50s when compared with the data from Size Korea (2004). Research data in the height and length categories were lower, and the majority of data from the other categories were higher. In order to analyze the characteristics of a plus-size woman's body, 4 factors were differentiated into 3 types with 17 categories: Factor 1 was the element of the thickness of the trunk, factor 2 was the element of the thickness of the lower body and legs, factor 3 was the element of shoulder size and factor 4 was the element of the upper body length. The accumulation rate was shown to be 74.47%. The characteristics for each type were as follows: Type 1 is a body type with a relatively thin waist, small width and girth of upper body and curvy lower body, type 2 is the average body type, and type 3 is a body type with big breasts and abdominal obesity. The standard body type belonged to type 2. According to the correspondency test between age and type, the characteristics of type 1 corresponded relatively close to the measures of subjects in their 40s and relatively far from subjects in their 30s to 50s while type 2 and type 3 appeared to be similar to subjects in their 50s.
Journal of the Korea Academia-Industrial cooperation Society
/
v.16
no.10
/
pp.6766-6778
/
2015
The purpose of the study is to investigate the effectiveness of the concurrent thermotherapy and intermittent fasting therapy for obesity. The experimental therapy conducted at the same time for 11 days, and had 35 adult participants. Six variables(girth, body weight, body mass index, body fat ratio, abdominal fat, and body basal metabolic rate) of participants were measured initially before the experimental therapy, and respectively after two consecutive experimental therapies (S1 and S2). The differences between the averages of the six variables in the initial measurement (C group), S1 group, and S2 group are significant and correlate each other. The differences between variables also were significant within groups and between groups. Additionally, the results show that the effectiveness of the therapy was greater after the 2nd therapy than the 1st therapy. In conclusion, these findings suggest that the concurrent therapy is effective and useful as a natural healing therapy for obesity.
Objectives: The present study was conducted to investigate associations between eating style and food intake of 45 female college students during Chuseok holidays. Methods: A ten-day food record was obtained and divided into two parts. The first five days (September 20-24, 2015) were considered as a 'Normal Day (ND 1-5)' and the subsequent five days (September 25-29) as 'Holiday (HD6-10)'. The middle three days (September 26-28) of the holidays were considered as the 'Peak Holiday (PD7- 9)'. Eating behaviors were measured using the Dutch Eating Behavior Questionnaire (DEBQ) and anthropometry was assessed in all study participants. Participants were grouped by cluster analysis according to the mean energy intake of the first three days of the Holiday. Results: Participants had a low-normal range of BMI and they were carefully restricting their food intake at Normal Day. Even the food intake did not exceed 2000 kcal per day during the Peak Holiday. External eating was the most prevalent type of eating behavior, followed by restrained eating and emotional eating. Normal energy and fat intake were correlated with the external eating subscale of the DEBQ. Restrained eating was associated with the weight, BMI, fat mass, waist, and hip girth of the subjects. Compared to the Normal Day, they overate during the Holiday with different eating styles including 'restraint', 'disinhibition', and 'fluctuation'. Therefore, neither eating behaviors nor anthropometry was associated with food intake during the Holiday. Although eating behaviors and anthropometric measures were not different among eating style clusters, the food intakes of disinhibition cluster were higher than those of restraint cluster during all the study periods. Conclusions: Subjects can be classified with the restraint, disinhibition, and fluctuation clusters. However, eating behaviors and anthropometry were not different among three clusters.
Journal of the Korean Society of Clothing and Textiles
/
v.20
no.2
/
pp.282-297
/
1996
The effective construction for ready-made clothes is one of the central concerns of both consumers and manufactuers in today's apparel industry. In order to reduce the burden of stocks and increase clothing fitness, systematic information on typical body sizes and somatotypes is essential. The purpose of this study i-: to provide basic data on young women's somatotypes for form designers and pattern makers. The subjects of the survey were 310 women of 18 to 26 years old. The study collected 84 anthropometric data for each Person. The data was analyzed by using of the multivariate method. The factor analysis was utilized in regard to the 65 items obtained from anthropometric measurement respectively. The principal component analysis was applied to the data with orthogonal rotation after extraction. The factor scores used in the factor analysis became the basis of determining the value of each variable of the cluster analysis. The cluster analysis was applied for identifying typical somatotypes. Ward's minimum variance method was applied for the purpose of extracting distance metrix by the standardized Euclidean distance. The element forming each cluster can be subdivided into several sets by crosstabulation which is obtained by the fastclus of the SAS. This research has demonstrated 3 distinctive types of silhouette contour of the trunk. Incidentally it also identified 4 of the lower body from the waistline to thigh contour respectively. The discriminant analysis showed that the most significant discriminant factor of the trunk classification were side neck point -1 scapular -1 waistiline length and waist girth. In Korea, the average somatotype of female college students tends to be tall, slim and straight. Reviewing the relationship between the classifications of three parts of body, they are related to each other to some extent but their distribution are not constant. Therefore, in view of clothing construction, a proper separation of the body surface is a necessity.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.