• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.104-123
• /
• 2019

Various European countries were active rather early on in the formation and research of Korean ceramics, which are considered a representative genre of Korean art. Of these, England is especially noteworthy due to its relatively large volume of extant archival material related to the procurement of Korean ceramics in modern Britain. The material is important in that it contributes to our understanding of the formation and economic worth of these collections. Especially meaningful are the previously unknown documents dating to the period when institutions such as the British Museum and the Victoria & Albert Museum were most actively collecting Korean ceramics. These documents provide insight into the circumstances-process, prices, standards, perceptions, etc.-of procurement for the Korean ceramics now in British collections. The changes in the perception of Korean ceramics and the intention for forming such collections in modern Britain can be divided into three periods. The first, starting from the late 1870s and ending in the late 1880s, is categorized by the collectors' misguided ideal of Korean ceramics in the absence of a true understanding of the subject. During the late 1880s up until 1910, the Korean ceramics entering British collections were mostly ethnographic in nature and examples of implements used in Koreans' daily lives. Lastly, from 1910 to 1940, Korean ceramics were regarded as art objects to be collected, and Goryeo celadons formed the core of many of the British collections being assembled at the time. As for the matter of collecting standards and processes, the matter is examined through the study of three individuals who visited Korea and acquired Korean ceramics in the early 20th century. After 1910, the British started to make trips to the Far East via boat or the Trans-Siberian Express and purchase Korean ceramics during their travels. It has been confirmed that former bureaucrats were able to acquire 'good and old Goryeo ceramics' at reasonable prices from either tomb robbers or through direct visits to regions where such wares were being excavated. In addition, this study also focuses on the previously unfamiliar company Kavanaugh & Co, which made important sales and provided transport of various objects, including Korean ceramics, to its Western clients. The final part of this study examines the standards of appraisal for the Korean ceramics collected in modern Britain. The main criterion the balance between form and price of the piece. In other words, the best pieces were those that were of superior quality but acquired at the cheapest prices. British collectors particularly valued not only the Goryeo celadons favored by the Japanese but also Joseon ceramics for their innovative form, design, and technique. These standards of aesthetic and form were important factors that influenced the formation of diverse Korean ceramic collections in modern Britain.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.263-270
• /
• 2008

Purpose: This study aimed to quantitatively measure the movement of tumors in real-time and evaluate the treatment accuracy, during the treatment of a liver tumor patient, who underwent radiosurgery with a Synchrony Respiratory motion tracking system of a robot CyberKnife. Materials and Methods: The study subjects included 24 liver tumor patients who underwent CyberKnife treatment, which included 64 times of treatment with the Synchrony Respiratory motion tracking system ($Synchrony^{TM}$). The treatment involved inserting 4 to 6 acupuncture needles into the vicinity of the liver tumor in all the patients using ultrasonography as a guide. A treatment plan was set up using the CT images for treatment planning uses. The position of the acupuncture needle was identified for every treatment time by Digitally Reconstructed Radiography (DRR) prepared at the time of treatment planning and X-ray images photographed in real-time. Subsequent results were stored through a Motion Tracking System (MTS) using the Mtsmain.log treatment file. In this way, movement of the tumor was measured. Besides, the accuracy of radiosurgery using CyberKnife was evaluated by the correlation errors between the real-time positions of the acupuncture needles and the predicted coordinates. Results: The maximum and the average translational movement of the liver tumor were measured 23.5 mm and $13.9{\pm}5.5\;mm$, respectively from the superior to the inferior direction, 3.9 mm and $1.9{\pm}0.9mm$, respectively from left to right, and 8.3 mm and $4.9{\pm}1.9\;mm$, respectively from the anterior to the posterior direction. The maximum and the average rotational movement of the liver tumor were measured to be $3.3^{\circ}$ and $2.6{\pm}1.3^{\circ}$, respectively for X (Left-Right) axis rotation, $4.8^{\circ}$ and $2.3{\pm}1.0^{\circ}$, respectively for Y (Crania-Caudal) axis rotation, $3.9^{\circ}$ and $2.8{\pm}1.1^{\circ}$, respectively for Z (Anterior-Posterior) axis rotation. In addition, the average correlation error, which represents the treatment's accuracy was $1.1{\pm}0.7\;mm$. Conclusion: In this study real-time movement of a liver tumor during the radiosurgery could be verified quantitatively and the accuracy of the radiosurgery with the Synchrony Respiratory motion tracking system of robot could be evaluated. On this basis, the decision of treatment volume in radiosurgery or conventional radiotherapy and useful information on the movement of liver tumor are supposed to be provided.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.255-264
• /
• 2009

To evaluate the effects of chemical pretreatments of lignocellulosic biomass on enzymatic hydrolysis process, Populus euramericana was pretreated for 1 hr with 1% sulfuric acid ($H_2SO_4$) at $150^{\circ}C$ and 1% sodium hydroxide (NaOH) at $160^{\circ}C$, respectively. Before the enzymatic hydrolysis, each pretreated sample was subjected to drying process and thus finally divided into four subgroups; dried or non-dried acid pretreated samples and dried or non-dried alkali pretreated samples and chemical and physical properties of them were analyzed. Biomass degradation by acid pretreatment was determined to 6% higher compared to alkali pretreatment. By the action of acid ca. 24.5% of biomass was dissolved into solution, while alkali degraded ca. 18.6% of biomass. However, reverse results were observed in delignification rates, in which alkali pretreatment released 2% more lignin fragment from biomass to the solution than acid pretreatment. Unexpectedly, samples after both pretreatments were determined to somewhat higher crystallinity than untreated samples. This result may be explained by selective disrupture of amorphous region in cellulose during pretreatments, thus the cellulose crystallinity seems to be accumulated in the pretreated samples. SEM images revealed that pretreated samples showed relative rough and partly cracked surfaces due to the decomposition of components, but the image of acid pretreated samples which were dried was similar to that of the control. In pore size distribution, dried acid pretreated samples were similar to the control, while that in alkali pretreated samples was gradually increased as pore diameter increased. The pore volume which increased by acid pretreatment rapidly decreased by drying process. Alkali pretreatment was much more effective on enzymatic digestibility than acid pretreatment. The sample after alkali pretreatment was enzymatically hydrolyzed up to 45.8%, while only 26.9% of acid pretreated sample was digested at the same condition. The high digestibility of the sample was also influenced to the yields of monomeric sugars during enzymatic hydrolysis. In addition, drying process of pretreated samples affected detrimentally not only to digestibility but also to the yields of monomeric sugars.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.60-68
• /
• 2015

The study of waste activated sludge (WAS) solubilization has been increased for sludge volume reduction and enhancing the efficiency of anaerobic digestion. Microwave (MW)-assisted solubilization is an effective method for the solubilization of WAS because this method can lead to thermal, nonthermal effect and ionic conduction by dielectric heating. In this study, the solubilization of WAS by MW heating and conductive heating (CH) was compared and to enhance the MW-assisted solubilization of WAS at low MW output power, chemical agents were applied such as $H_2SO_4$ as the strong acid and $CaCl_2$, NaCl as the ionic materials. Compared to the COD solubilization of WAS by CH, that by MW heating was approximately 1.4, 6.2 times higher at $50^{\circ}C$, $100^{\circ}C$, respectively and the highest COD solubilization of WAS was 10.0% in this study of low MW output power condition. At the same MW output power and reaction time in chemically agents assisted experiments, the COD solubilization of WAS were increased up to 18.1% and 12.7% with the addition of $H_2SO_4$ and NaCl, however, that with the addition of $CaCl_2$ was 10.7%. This result might be due to the fact that the precipitation reaction occurred by calcium ion ($Ca^{2+}$) and phosphate ion (${PO_4}^{3-}$) produced in WAS after MW-assisted solubilization. In this study, $H_2SO_4$ turned out to be the optimal agent for the enhancement of MW efficiency, the addition of 0.2 M $H_2SO_4$ was the most effective condition for MW-assisted WAS solubilization.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.502-508
• /
• 1997

Rice bran dietary fiber extract, which was obtained after termamyl treatment of defatted rice bran contained $27.3{\sim}30.5%$ protein, $49.7{\sim}54.1%$ insoluble dietary fiber, and $1.9{\sim}2.7%$ soluble dietary fiber. Extrusion decreased the insoluble dietary fiber content but increased the soluble dietary fiber content, while roasting did not. Influence those content. Each mineral element content was depended upon heat processing method. Extrusion increased the water binding capacity and L value, while roasting reduced the water binding capacity and L value. Scanning electron microscopy showed damaged cell walls for extruded sample compared to roasted one which had fully collapsed cell walls. The increase of water absorption, developing time, and stability and the of MTI of wheat flour-dietary fiber extract composites with addition of dietary fiber extract were observed by Farinograph. Rice bran dietary fiber extract had an effect on the bread making resulting in increase of bread weight and color of crumb and crust, and decrease of bread volume and texture. As a result of sensory evaluation, appearance, texture, overall acceptability were significantly different from control but flavor and taste were not different significantly up to 6% level. Heat treated samples had differences in mean values, but not significant differences statistically.

• Sijohaknonchong
• /
• v.23
• /
• pp.133-159
• /
• 2005

This thesis is about Sijo(traditional Korean poem) made-up of 35 volumes and 45 poems written by Han Yong-un. The aim of this study is reappraise the Sijo which is not known to Korean people. There are four thesis about Sijo so far. Ko Myeong-su divided Sijo into separate subjects and researched it very deeply. After I read the Chinese Poems of Han Yong-un, I researched the relationships between subject matter and its theme. The relationships are between the moon and religion, spring and aspiration, autumn and grief or lose, and the sword and patriotism. I chose to discuss a Sijo 'Mugunghwa Shimeukwajeo'(무궁화(無窮花)를 심으과저) shich deals with the moon and religion. The main subject matter of this S is the moon. There are three poems in this volume. They are all about the moon. There is a Mugunghwa (無窮花) on the moon. This poem asserts that the moon is good for love, and it is the subject matter of the poet's religion. The moon in the Chinese poem 'Okjungkamwhiy'(獄中感懷) believes there is hope in prison. The moon in 'Wolbang(月方中) is Buddhist thinking. I researched 'Geochon'(早春) tee poems about spring and aspiration. The first poem is about the independent movement against the Japanese. Autumn is about the feeling of lose in the life. Sijo 'Chuyamong' (秋夜夢) is lose the lover. The second poem is about conquering all difficulties of the poet's current circumstance. The third poem is about the feeling of vacuum in his life. The fourth poem is about deploring losing his mind. 'Nam-a'(男兒) and 'Urinim'(우리님) are books about patriotism. These poems have the subject matter of a sword for song patriotism. 'Kiharksaeng'(寄學生), 'Anhaeju'(安海州), and 'Hwangmaecheon'(黃梅泉) are patriotic poems. In this study, I found that the subject matter and the theme in the Chinese poems of Han Yong-un(韓龍雲) are related. Mainly he used the metaphor of the moon for religion, spring for aspiration, autumn for grief or lose, and sword for patriotism.

• Journal of Ginseng Research
• /
• v.31 no.2
• /
• pp.93-101
• /
• 2007

The purpose of this study is to examine the improvement of endurance exercise performance by taking mixtures of Ginseng Radix rubra and Paeonia Radix. For this purpose, time of exhaustion, $V0_2max$, heart rate, and blood lactate was used as improvement index. The experiments were executed to thirty eight men in their twenties. They were randomly assigned into four groups[CG: control group(n=10), IG: ingestion mixtures group(n=9), TPG: ingestion placebo+training group(n=9), TIG: ingestion mixtures+training group(n=10)]. IG and TIG took mixtures of Ginseng Radix rubra and Paeonia Radix for four weeks, and TPG and TIG exercised once a day, three times a week, exercised for 25 minutes during the first week and added 2 minutes by week during four weeks up to 75% of their maximum heart rate. Time of exhaustion showed statistically significant increase for IG, TPG and TIG. TIG had the longest time of exhaustion and IG the shortest. In case of $VO_2max$, no statistically significant change was found among four groups. However, IG, TPG, TIG showed small increase in $VO_2max$. Similarly, no significant change was found for heart rate in rest even though TIG and TPG appear to have decreasing trend. For maximum heart rate, no significant change was found either, but IG, TPG and TIG showed increase. In case of blood lactate from rest to exercise until 18 minutes, no group had significant decrease. In case of blood lactate in exhaustion, IG, TPG and TIG had significant increase. Blood lactate recovery volume at 5 minutes, 10 minutes, 20 minutes showed no significant results for all four groups, but TIG and TPG had a small increase.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2014

Purpose: Fibrous dysplasia is related to the mutation of gene encoding the alpha-subunit of a signal-transducing G-protein and has variable clinical course. Operation can be performed to prevent functional disorder or structural deformity. After curettage, autologous bone graft were used to fill the defects after curettage. The aim of this study is to compare the result of autogenous cancellous bone grafting and allogenic bone grafting for fibrous dysplasia. Materials and Methods: Among the patients who visit our hospital during the period of April, 1997 to October, 2013, we selected 34 patients who diagnosed fibrous dysplasia and visited our clinic over 1 year. There were 13 males and 21 females. Average age was 26.4 (range 2 to 57) years old. Autogenous bone graft (group I) in 5 cases, Non-autogenous bone graft (group II) in 30 cases. Iliac bone is used in all cases of autogenous bone graft. There were no significant difference in age, follow-up period, preoperational laboratory finding between two groups. Radiographic image was done to evaluate the recurrence of fibrous dysplasia or secondary degeneration. Results: There were four cases in recurrence (group I: 1 case, group II: 3 cases, p=0.554). In all recurrent cases, reoperations were done using curettage and autogenous iliac bone graft. There was no re-recurrence after reoperation. One case of secondary aneurysmal bone cyst was confirmed (group II) and 1 cases of pathologic fractures had developed (group I: 0 case, group II: 1 cases, p=0.559). No malignant change occurred. Conclusion: There were no significant difference between autogenous bone graft group and non-autogenous bone graft group. Our result suggested that autogenous bone graft seems to be good method to treat fibrous dysplasia, in the case of small volume of tumor lesion or non-weight bearing portion.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.