• 한국안전학회지
• /
• 제12권3호
• /
• pp.30-37
• /
• 1997

This paper deals with the residual stress of carburized spur gears is calculated being on the assumption that the main cause of residual stress is the volume difference between case and core due to the martensitic transformation in cooling. A formula is proposed to estimated the residual stress from the hardness and the amount of retained austenite. The estimated residual stress is close to the stress measured by X-ray method. The estimated residual stress is applied to the analysis of the fracture mechanics of carburized spur gear teeth. The stress intensity factor due to the residual stress is demonstrated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in Carburized gear tooth.

• ETRI Journal
• /
• 제38권1호
• /
• pp.141-148
• /
• 2016

This paper proposes a method to estimate directly the incoherent scattered intensity and radar cross section (RCS) from the effective permittivity of a random media. The proposed method is derived from the original concept of incoherent scattering. The incoherent scattered field is expressed as a simple formula. Therefore, to reduce computation time, the proposed method can estimate the incoherent scattered intensity and RCS of a random media. To verify the potential of the proposed method for the desired applications, we conducted a Monte-Carlo analysis using the method of moments; we characterized the accuracy of the proposed method using the normalized mean square error (NMSE). In addition, several medium parameters, such as the density of scatterers and analysis volume, were studied to understand their effect on the scattering characteristics of a random media. The results of the Monte-Carlo analysis show good agreement with those of the proposed method, and the NMSE values of the proposed method and Monte-Carlo analysis are relatively small at less than 0.05.

• Computers and Concrete
• /
• 제10권1호
• /
• pp.19-33
• /
• 2012

The performance of a concrete is significantly influenced by its mixture proportion and the coating thickness on aggregate surface. The concrete in this study is designed by estimating the blending ratio of aggregate using a densified mixture design algorithm (DMDA) based on an ideal grading curve and estimating the paste volume as the sum of the amount of paste needed to provide an assigned coating paste thickness. So as to obtain appropriate concrete amount, and thus can accurately estimate the property of concrete. Deduction of this mix design formula is simple and easy understanding, and meanwhile to obtain result is fast. This estimation model of mix design is expected to reward to industry and effectively upgrade concrete quality.

• 한국통신학회논문지
• /
• 제36권4C호
• /
• pp.254-264
• /
• 2011

본 논문에서는 실내에서 무선으로 위치를 추정하는데 사용되는 삼변측량과 최소제곱법의 정확도 향상을 위한 두 가지 알고리즘을 제안한다. 본 논문에서는 삼변측량을 사용하여 위치를 추정할 때 상대적으로 큰 위치 추정 오차를 발생시킬 수 있는 경우, 즉 3개의 원이 교직선을 형성하지 못하는 경우를 사면체를 위한 헤론의 공식을 적용하여 분류하고, 분류과정에서 얻어진 부피의 절댓값을 이용하여 측정된 추정 거리를 신뢰성 있는 추정 거리로 변환하는 알고리즘을 제안한다. 또한 Anchor node의 개수가 3개 이상인 경우에 사용하는 최소제곱법의 변형된 알고리즘인 RWGH의 연산량을 개선하면서 더 좋은 성능을 낼 수 있는 가중치를 이용한 무게 중심 알고리즘을 제안하고 시뮬레이션을 통해 성능을 검증한다.

• 한국농공학회지
• /
• 제29권4호
• /
• pp.59-72
• /
• 1987

Although long-term runoff analysis is important as much as flood analysis in the design of water works, the technological level of the former is relatively lower than that of the latter. In this respect, the precise estimation model for the volume of successive runoff should he developed as soon as possible. Up to now, in Korea, Gajiyama's formula has been widely used in long-term runoff analysis, which has many problems in applying in real situation. On the other hand, in flood analysis, unit hydrograph method has been exclusively used. Therefore, this study aims at trying to apply unit hydrograph method in long-term runoff analysis for the betterment of its estimation. Four test catchment areas were selected ; Maesan area in Namlum river as a representative area of Han river system, Cheongju area in Musim river as one of Geum river system, Hwasun area in Hwasun river as one of Yongsan river system, and Supyung area in Geum river as one of Nakdong river system. In the analysis of unit hydrograph, seperation of effective rainfall was carried out firstly. Considering that effective rainfall and moisture condition of catchrnent area are inside and outside of a phenomenon respectively and the latter is not considered in the analysis, Initial base flow(qb)was selected as an index of moisture condition. At the same time, basic equation(Eq.7) was established, in which qb can take a role as a parameter in relating between cumulative rainfall(P) and cumulative loss of rainfall(Ld). Based on the above equation, computer program for estimation model of qbwas seperately developed according to the range of qb, Developed model was applied to measured hydrographs and hyetographs for total 10 years in 4 test areas and effective rainfall was estimated. Estimation precision of model was checked as shown in Tab- 6 and Fig.8. In the next stage, based on the estimated effective rainfall(R) and runoff(Qd), a runoff distribution ratio was calculated for each teat area using by computerised least square method and used in making unit hydrographs in each test area. Significance of induced hydrographs was tested by checking the relative errors between estimated and measured runoff volume(Tab-9, 10). According to the results, runoff estimation error by unit hydrograph itself was merely 2 or 3 %, but other 2 or 3 % of error proved to be transferred error in the seperation of effective rainfall. In this study, special attentioning point is that, in spite of different river systems and forest conditions of test areas, standardized unit hydrographs for them have very similar curve shape, which can be explained by having similar catchinent characteristics such as stream length, catchinent area, slope, and vegetation intensity. That fact should be treated as important factor ingeneralization of unit hydrograph method.

• 한국측량학회지
• /
• 제20권3호
• /
• pp.265-272
• /
• 2002

지금까지 토공량계산을 위한 많은 방법들이 단순식에서부터 복잡한 방법으로 개발되어 왔다. 일찍이 토공량계산을 위한 기본적인 방법은 상부면적을 x, y방향으로 뻗은 경계선의 사각격자로 나누어 계산한다. 그러나 이들 방법은 많은 측량현장에서 요구되는 토공량견적을 정확하게 계산할 수 없다. 1998년 Easa는 x, y 각 방향으로 같은 선상을 따라 사각격자를 나누었다. 이 방법은 격자 양방향으로 3차의 Hermite 다항식을 이용하였다. 이것은 반드시 동일한 x, y방향의 경계를 따라 표고데이터가 존재해야 하므로 지형의 최대, 최소점 같은 점의 선택을 불가능하게 한다. 이 연구에서 제시된 토공량 계산법은 Easa(1998)방법의 단점을 피하고 장점을 결합시켰다. 제안된 방법은 가로x, 세로y 방향의 각 경계를 따라 3차의 Hermite 다항식을 이용하지만 각각의 부등간격의 격자는 양방향으로 일정하지 않고 부분적으로 비격자형태로 이루어져 있다. 새롭게 제시된 방법은 다른 재래식 방법보다 더 나은 정확도를 제공한다.

• 물과 미래
• /
• 제24권3호
• /
• pp.71-82
• /
• 1991

수질원 부존량의 평가를 위한 월유출량의 추정방법은 통상 경험식에 의한 방법, 물수지분석에 의한 방법 그리고 회귀분석에 의한 방법등이 있다. 본 연구는 수위계측지점의 유출자료를 사용하여 다중회귀분석으로 회귀모형을 수립함으로서, 장기 수자원 개발계획의 수립에 필요한 월유출량의 추정을 가능토록하였다. 사용한 자료는 총 48개 수위관측소의 월유출량 및 기상,지상 인자 이며 이중 43개 지점은 모형의 개발에, 나머지 5개 지점은 모형의 검증에 이용하였다. 또한 모형을 유역별모형과 전체모형, 평균치모형과 개별자료모형으로 구분하여 모형-1, 모형-2, 모형-3 그리고 모형-4의 4개 모형을 수립하였으며, 검증결과 모형-2가 가장 적절한 모형으로 판단되었다. 선정된 회귀모형과 기존의 가지야마공식의 적용성을 통계적 방법에 의해 비교한 결과 본 다중회귀모형이 연유출량 뿐아니라 월별유출량의 변화성향을 매우 잘 나타내고 있으며, 적용 또한 용이함이 입증되었다.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.45-51
• /
• 2012

Sea ice properties have been considered a key indicator in the structural design criteria of icebreaking vessels and arctic offshore platforms to estimate design ice load and resistance for their safety management in Arctic Ocean. A measurement study of sea ice properties was conducted during July to August of 2011 with the Korean icebreaking research vessel "Araon" around Chukchi Borderland. The sea ice concentration appears to be rapidly decreasing during this cruise. Ice condition seems to be thick second-year ice and multi-year ice and then, a lot of melt ponds were observed in the surface of ice floe. Calculated flexural strength of sea ice was about 250~550kPa, ice thickness was roughly 1.3~3.0m. In this research we performed field experiment to measure ice temperature along the depth, thickness, density, salinity, brine volume ratio and crystal structure. Apparent conductivities derived with the electromagnetic induction instrument were compared to drill hole measurement results and accuracy of sea ice thickness estimation formula was discussed.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.122-129
• /
• 2020

The circumference of the body is not only an indicator in order to buy clothes in our life but an important factor which can increase the effectiveness healing properly after figuring out the shape of body in a hospital. There are several measurement tools and methods so as to know this, however, it spends a lot of time because of the method measured by hand for accurate identification, compared to the modern advanced societies. Also, the current equipments for automatic body scanning are not easy to use due to their big volume or high price generally. In this papers, OpenPose model which is a deep learning-based Skeleton Tracking is used in order to solve the problems previous methods have and for ease of application. It was researched to find joints and an approximation by applying the data of the deep camera via reference data of the measurement parts provided by the hospitals and to develop a program which is able to measure the circumference of the body lighter and easier by utilizing the elliptical circumference formula.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.611-621
• /
• 2009

This paper first reviews the physical meanings and the expressions of two representative strain rate models: CSM (Cowper-Symonds Model) and JCM (Johnson-Cook Model). Since it is known that the CSM and the JCM are suitable for low-intermediate and intermediate-high rate ranges, many studies regarding marine accidents such as ship collision/grounding and explosion in FPSO have employed the CSM. A formula to predict the material constant of the CSM is introduced from literature survey. Numerical simulations with two different material constitutive equations, classical metal plasticity model based on von Mises yield function and micromechanical porous plasticity model based on Gurson yield function, have been carried out for the stiffened plates under impact loading. Simulation results coincide with experimental results better when using the porous plasticity model.