• Korean Journal of Veterinary Research
• /
• v.34 no.3
• /
• pp.635-645
• /
• 1994

The environmental pollution by heavy metals has become a significant hygenic problem. Recently it is said the garlic supplementation in diet have protective effect on the heavy metal accumulation in tissue of rat by a researcher. In this study two experiments were undertaken. Firstly, dogs were fed diet supplemented with cadmium of cadmium plus 7% of raw garlic for 50 days. on the 50th day of experiment all dogs were euthanasied and the cadmium content of various tissue were measured by atomic absorption spectrophotometeric method. Secondly, in order to find out the toxic effect of garlic dogs were fed diet supplemented with 7% of raw garlic for 50 days and hematological or hematochemical observations were undertaken at 10 day intervals. The results obtained from these experiments were summarized as follows; 1. In dogs treated with cadmium and cadmium plus garlic cadmium was accumulated in renal cortex, liver, and muscle. However the concentrations of cadmium showed no significant between the two group. 2. In dogs fed diets supplemented with 7% of raw garlic significant decrease of erythrocyte count, packed cell volume and hemoglobin content and significant increase of Heinz body erythrocyte and reticulocyte count were recognized. 3. The garlic-treated dogs and control dogs had normal asparate aminotransferase, alanine aminotransferase, alkaline phosphotase, blood urea nitrogen value. The value showed no significant difference between the two group. 4. From these results it may be concluded that the garlic have protective effect for cadmium accmulation in tissue and excess garlic in diet could induce hemolytic anemia in dogs.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2013

The number of pedestrians is considered essential information which can be used to control a person who makes a entrance or a exit into a building. The number of pedestrians, also, can be used to help to manage pedestrian traffic and the volume of pedestrian flow within the building. Due to the fact there is incorrect detection by occluded, shadows, and illumination, however, difficulty can arise in existing system which is for detection and counts of a person who makes a entrance or a exit into a building. In this paper, it is minimized that the change of illumination and the effect of shadow through the transmitted image from camera which is created and processed with great adaptability. The accuracy of the calculations can be increase as well by using Kalman Filter and Mean-Shift Algorithm in order to avoid overlapped counts. As a result of the test, it is proved that the count method that shows the accuracy of 95.4% should be effective for detection and counts.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.429-436
• /
• 2018

Electronic documents are efficient to be created and managed, but they are liable to lose their originality because copies are created during distribution and delivery. For this reason, various security technologies for electronic documents have been applied. However, most security technologies currently used are for document management such as file access privilege control, file version and history management, and therefore can not be used in environments where authenticity is absolutely required, such as confidential documents. In this paper, we propose a method to detect document forgery and tampering through analysis of file system without installing an agent inside the instance operating system in cloud computing environment. BubbleDoc monitors the minimum amount of virtual volume storage in an instance, so it can efficiently detect forgery and tampering of documents. Experimental results show that the proposed technique has 0.16% disk read operation overhead when it is set to 1,000ms cycle for monitoring for document falsification and modulation detection.

• The Journal of Korean Physical Therapy
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2017

Purpose: This study aimed to demonstrate reduction in stroke symptoms by analyzing the changes in respiratory function and activities of daily living (ADL) after respiratory muscle strengthening exercise in patients who had a stroke and thereby, propose an efficient exercise method. Methods: Twenty patients with hemiplegic stroke were divided into two groups, with 10 patients in each. The control group (CG) received the traditional exercise therapy, and the experimental group (EG) received the traditional exercise therapy combined with expiratory muscle strengthening training. The training continued for 6 weeks, 5 days a week. Forced vital capacity (FVC) and forced expiratory volume at 1 second (FEV1) were measured with a spirometer, $SpO_2$ was measured with a pulse oximeter, and ADL were assessed by using the modified Barthel index (MBI). A paired t test was applied to compare the differences before and after the intervention, and an independent t test was used to compare the differences between the groups. The level of statistical significance was set as ${\alpha}=0.05$. Results: The changes in the FVC and FEV1 values within the group showed significant differences only in the EG (p<0.01). The between-group difference was statistically significant only for FVC and FEV1 in the EG (p<0.01). The changes in $SpO_2$ and MBI within the group showed significant differences only in the EG and CG (p<0.01). Between-group differences were statistically significant only for $SpO_2$ and MBI in the EG (p<0.05). Conclusion: The interventions with active patient involvement and combined breathing exercises had a positive impact on all the functions investigated in this study.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.199-204
• /
• 2005

The nose is the most prominent area of the face, therefore susceptible to trauma and skin cancer. When small sized defect is in nasal tip, it results in disturbance of the facial harmony even if replantation, composite graft, skin graft or median forehead flap has been used for the reconstruction. So it is needed that the best method reconstruction is performed according to the degree of defect or deformity. And at the same time the physiology and anatomy of nose were clarified and its aesthetic subunits were employed. How can we cover the about 3 cm sized nasal defect in nasal tip with cartilage exposure? At first, we can think forehead island flap is most appropriate. We performed 7 cases of the forehead island flap for reconstruction of the defect in nasal tip(4 cases: cancer, 3 cases: trauma) from March, 2001 to August, 2004. This result was satisfactory in the point of texture, color, donor scar, and there were no complication such as wound disruption, infection, flap atrophy, and hematoma. The advantages of forehead island flap are: 1) No injury of deep vessel and nerve, 2) control of shape and volume, 3) Short operation time, 4) primary closure of donor site, 5) one stage operation. Also, forehead island flap can cover the defect in nose where skin graft and local flap can not cover. But, operator always must take care for flap congestion and donor site scar. We thought forehead island flap is one of the best option of reconstruction of nasal tip defect.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.268-275
• /
• 1993

A series of parametric investigations are performed in order to resolve the flow characteristic of a Quebec city stoker incinerator. The parameters considered in this study are five internal configurations of the Quebec city stoker itself and its modified ones, primary air velocity, the injection velocity and angle of the secondary air, and the reduction of the stoker exit area. A control-volume based finite-difference method by Patankar together with the power-law scheme is employed for discretization. The resolution of the pressure-velocity coupling is made by the use of SIMPLEC algorithm. The standard, two equation, k-$\varepsilon$ model is incorporated for the closure of turbulence. The size of recirculation region, turbulent viscosity, the mass fraction of the secondary air and pressure drop are calculated in order to analyze the characteristics of flow field. The results are physically acceptable and discussed in detail. The flow field of the Quebec city stoker shows the strong recirculation zone together with the high turbulence intensity over the upper part of the incinerator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2018

The HEC-HMS model was applied to identify the rainfall-runoff processes for the Anseongchun basin, where the lower part of the stream has been damaged severely by tropical storms in the past. Modeling processes include incorporating with the SCS-CN model for loss, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated through an optimization technique using a trial and error method. Sensitivity analysis after calibration was performed to understand the effects of parameters, such as the time of concentration, storage coefficient, and base flow related constants. Two storm water events were simulated by the model and compared with the corresponding observations. Good accuracy in predicting the runoff volume, peak flow, and the time to peak flow was achieved using the selected methods. The results of this study can be used as a useful tool for decision makers to determine a master plan for regional flood control management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.60-67
• /
• 2010

Delay reduction of vehicles at the intersection is highly dependent on the signal operation method. Most previous traffic operations have focused on minimizing delay by adjust traffic offset. However, these methods have limitation in solving traffic problem if the volume reaches or exceeds the capacity. In this paper, it was analyzed that the effectiveness of various signal operation methods such as left-turn prohibition, and using protected mixed with permitted left turn using the traffic data from Daejeon city. In case of the left-turn prohibition of a intersection, the control delay reduced from 54.2 seconds to 22.7 seconds and especially, the delay of the southbound was drastically reduced. In addition, the delay was highly reduced from 27.0 seconds to 12.1 seconds when the operation system was changed to use protected mixed with permitted left turn.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.249-252
• /
• 2008

In recent large-scale structures, as mass concrete type structure is frequently applied to the building, temperature crack due to hydration heat needs to be considered. Since a volume change is internally or externally restricted in a mold after placing concrete, temperature crack of mass concrete takes place. By this reason, the reduction method to control this crack is required. In this study, low heat mixture and hydration heat difference is used to execute the analysis of hydration heat, considering the changes of heat transfer coefficient according to curing conditions and block placement of mass concrete. For the analytical modelling, original portland cement and concrete of low heat mixture are placed in the upper and lower payer, respectively. A convection boundary condition is fixed because mass concrete of block placement is characterized by the difference of mold form and curing condition. Through the analysis results considering the changes of low heat mixture, block placement, and heat transfer coefficient, we check out the temperature and stress distribution and analyze the temperature crack reduction effect.