• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.770-774
• /
• 1994

The volume of an acoustic source is important in determining various acoustic parameters. One of the suggested techniques is the internal pressure method incorporating a loudspeaker attached to a chamber wall and a microphone inserted into the cavity. Although the method is easy to handle with a very simple measurement setup, the coupling effects between the dynamic system of the loudspeaker and acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field should be considered for precise result. In this study, higher order modes due to the discontinuities of loudspeaker and microphone boundaries are included and the electro-acoustic coupling effects are compensated for by using the results of two cylinders with different lengths. The volume velocity of a loudspeaker thus obtained agrees very with that measured by laser sensor.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.9-13
• /
• 2019

본 논문에서는 원가 절감을 위한 개선된 $165^{\circ}$ 12 스텝 제어를 고려한 브러시리스 DC 전동기의 최적화 설계에 대하여 논한다. 개선된 12 스텝 제어는 기존 제어의 도통각 $150^{\circ}$을 확장시켜 전동기의 출력을 향상 시킬 수 있다. 향상된 전동기 출력을 고려한 반응 표면법을 이용한 최적화 설계를 통해서 회전자, 고정자 및 영구자석의 부피를 감소시켜 원가절감이 가능한 설계를 제시한다. 제안된 설계는 기존 전동기의 요구 사양 및 효율 향상을 만족하고 기존 전동기 중량의 약 3.5%를 저감하였다. 유한요소법을 이용한 전자계 해석을 통해 최적화 설계의 타당성을 입증하였다.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.121-128
• /
• 2009

본 연구는 기존 정주기식 신호제어로 인하여 비효율적으로 운영되고 있는 3지 교차로의 문제점을 보완하는 방안으로써 반감응 신호제어를 기본으로 하고 보행자작동신호기를 사용하는 신호운영방식의 효율성을 분석하였다. 반감응 신호제어의 경우 부도로에 교통량이 적을 때 주도로의 교통소통을 원활히 하여 교차로 내 지체를 감소시킬 수 있으며, 보행자작동신호기는 보행자가 없음에도 불구하고 보행자 신호를 작동시켜 발생하는 불필요한 대기시간을 줄일 수 있는 장점을 가지고 있다. 위의 두 가지의 장점을 모았을 경우 기존의 정주기식 신호제어와 반감응식 신호제어에 비하여 얼마나 효과가 있는지 미시적 시뮬레이션 프로그램인 VISSIM을 사용하여 정량화된 차량당 평균지체 감소의 정도를 분석하고자 하였다. 본 연구는 인천의 1개 3지 교차로를 대상으로 현장조사를 실시하였고 각각의 신호제어 방식에 따라서 보행자 교통량을 변화시켜 민감도 분석을 실시하였다. 시나리오 별 분석을 통하여 차량당 평균지체시간을 비교한 결과, 대상교차로는 정주기식 신호제어에 비하여 보행자작동신호기를 이용한 신호제어방식이 최소 3.7초(10%), 최대 6초(16%)의 감소효과를 나타내었으며 반감응식 신호제어와의 비교에서는 보행자교통량이 측정교통량의 20% 이하일때보다 효율적인 것으로 나타났다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제22권3호
• /
• pp.1-9
• /
• 2016

볼륨 가시화의 샘플링 단계에서는 보통 선형 보간이 사용된다. 선형 보간은 일반적으로 좋은 화질의 영상을 생성하지만 의료영상 소프트웨어는 높은 화질의 영상이 필요하기 때문에 경우에 따라 높은 기대에 미치지 못한다. 본 연구는 샘플링 단계에서 B 스플라인을 기반으로 하는 삼차 보간을 수행한다. 기존의 B 스플라인은 제어점을 지나지 않는 근사 함수이므로, 본 연구는 제어점을 이동하여 생성된 곡선이 원래의 제어점을 지나도록 하였다. 가시화 단계에서는 속도를 향상하기 위해 빈공간 도약을 적용 가능하다. 빈공간을 파악하기 위해서는 각 블록에 대한 최대값과 최소값을 계산해야 한다. B 스플라인은 볼록포 성질이 있어서, 제어점의 값을 최대값과 최소값으로 사용할 수 있다. 그 결과로 삼차 보간 기반의 볼륨 가시화가 대화적 속도로 가능하다.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.336-341
• /
• 2019

The gas adsorption isotherm requires accurate measurement for the analysis of porous materials and is used as an index of surface area, pore distribution, and adsorption amount of gas. Basically, adsorption isotherms of porous materials are measured conventionally at 77K and 87K using liquid nitrogen and liquid argon. The cold volume calibration in this conventional method is done simply by splitting a sample cell into two zones (cold and warm volumes) by controlling the level sensor in a Dewar filled with liquid nitrogen or argon. As a result, BET measurement for textural properties is mainly limited to liquefied gases (i.e. $N_2$ or Ar) at atmospheric pressure. In order to independently investigate other gases (e.g. hydrogen isotopes) at cryogenic temperature, a novel temperature control system in the sample cell is required, and consequently cold volume calibration at various temperatures becomes more important. In this study, a cryocooler system is installed in a commercially available BET device to control the sample cell temperature, and the automated cold volume calibration method of temperature variation is introduced. This developed calibration method presents a reliable and reproducible method of cryogenic measurement for hydrogen isotope separation in porous materials, and also provides large flexibility for evaluating various other gases at various temperature.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.15-22
• /
• 2001

A pressure-based, unstructured finite volume method has been applied to couple the chemical kinetics and fluid dynamics and to capture effectively and accurately the steep gradient flame field. The pressure-velocity coupling is handled by two methodologies including the pressure-correction algorithm and the projection scheme. A stiff, operator-split projection scheme for the detailed nonequilibrium chemistry has been employed to treat the stiff reaction source terms. The conservative form of the governing equations are integrated over a cell-centered control volume with collocated storage for all transport variables. Computations using detailed chemistry and variable transport properties were performed for two laminar reacting flows: a counterflow hydrogen-air diffusion flame and a lifted methane-air triple flame. Numerical results favorably agree with measurements in terms of the detailed flame structure.

• 소음진동
• /
• 제9권2호
• /
• pp.285-294
• /
• 1999

Transient analysis for compressible fluid flow has been performed experimentally and analytically to study the dynamic characteristics of the end volume transmission lines following a sudden pressure change a its entrance. The numerical method was developed based on the method of characteristics. The sudden pressure at its entrance was generated by rupture of diaphragm in a shock tube. The sudden pressure was used to obtain the response, as input signal for the numerical analysis. The response to the sudden pressure at the end volume was measured using a pressure transducer. The experimental result shows good agreements with the numerical result. The effects of tube length, its diameter and end volume magnitude are evaluated on the responses of the pressure and on the damping factor. It is found that the viscous damping effects on the response through the transmission pipeline becomes larger with increasing pi;eline length and decreasing diameter of the pipe and the fluid-elastic stiffness decreases with increasing the terminal volume. The numerical approach presented in this paper can be very useful in designing the instrument and control system.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.458-463
• /
• 2004

This paper presents a fast IA(integer ambiguity) resolution method that determines the IA within short epochs with guaranteed reliability. Based on the fact that the search volume and the cost function are influenced by the selection of primary IAs in the plane intersection method, an IA resolution method is proposed that evaluates IA candidates repeatedly in an epoch with different combinations of primary IAs. In order to guarantee the reliability of the resolved IA with a certain probability, an inequality condition for selecting differencing operator is derived. Experiment results show that the proposed method consistently provides the true IA estimates within short time.

• 농업과학연구
• /
• 제44권4호
• /
• pp.487-494
• /
• 2017

Spinosad and spinetoram are widely used insecticides for the control of lepidopteran larvae, leaf miners, and thrips; however, they might also have low toxicity toward beneficial insects like bees. Because these pesticides are easily photolyzed by ultraviolet radiation, the QuEChERS method, with its simple pretreatment procedure, is often used for analyzing residues of spinosad and spinetoram. The present study performed a residue analysis using a modified QuEChERS method by pretreating with ammonium salt. The limit of detection (LOD) of the modified method was 0.05 mg/kg and the limit of quantification (LOQ) was 0.25 mg/kg. The coefficient of determination ($R^2$) for the calibration curve was 0.999. Also, we examined any change in the adhesion of spinosad and spinetoram on the plants depending on a spray volume. The adhesion was approximately 70% when the spray volume was increased from 60 L to 120 L per 10 a whereas the adhesion was approximately 37% when the spray volume was increased from 125 L to 250 L. This showed that the amount of adhesion decreased with the higher spray volume. The efficacy result of spinetoram was that over 90% of Frankliniella occidentalis was controlled with the application volume of 125 L per 10 a. Therefore, the result of this study indicates that control of insects is effective and sufficient with a spray volume of 125 L per 10 a in paprika cultivation facilities.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.13-19
• /
• 2016

PURPOSE : The purpose of this study was to determine whether tredmill exercise increases pulmonary function and decreases body mass index of the 20s obesity. METHOD : Thirty obesity in their 20s were randomly assigned to on experimental group (n=15) or control group (n=15). Over the course of four weeks, the experimental group participated in tredmill exercise for 30 minutes three times per week and the control group participated in auto-med exercise for 30 minutes three times per week. Subjects were assessed pre-test and post-test by measurement of pulmonary function (tidal volume, inspiration reserve volume, expiratory reserve volume, vital capacity) and body mass index. RESULT : Our findings show that the experimental group had significant difference in expiratory reserve volume and vital capacity and body mass index (p<.05). In the comparison of the two groups, the experimental group had higher pulmonary function and lower body mass index than the control group. CONCLUSION : In this study, the experimental group showed greater improvement in pulmonary function than the control group, which indicates that the tredmill exercise is effective at increasing the pulmonary function and body mass index 20s obesity.