• 전기학회논문지
• /
• 제61권10호
• /
• pp.1399-1411
• /
• 2012

The grid frequency is controlled cooperatively by the governor of the Turbine-Generator and the automatic generation controller(AGC) of the KPX(Korea Power Exchange). It is a basic requirement that the reliability of the governor is verified to enhance the power system stability but it is not easy to confirm the response characteristics of the governor because all generators are operated in the grid system that has the constant voltage and frequency. Therefore, it is necessary to study a new test method in order to examine the governor dynamic characteristic in the similar fault conditions. A study has shown that it is verified to simulate the turbine-generator power control system, the governor response characteristic under limited conditions and contribution of AGC with the gas turbine generator simulation model as well as demonstrate the dynamic response of the governor with the developed governor dynamic characteristic tester based on digital controller while the turbine-generator is connected to the grid system. This tester is constructed by the built-in functions of the turbine-generator main controller. In this treatise, the theoretical background, development method and the results of both simulations and demonstrations are described as another way to verify the turbine-generator governor dynamic characteristics.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권5호
• /
• pp.80-86
• /
• 1995

This paper proposes the design of new digital controller to improve control performance of automation system. The proposed controller improves response time and steady state error in the driving a system to generate a output voltage proportional to the frequency difference of reference input signal and feedback signal, holds good stability and higher accuracy designing an adaptive line density selector and a quantized level controller of slope-varied type. A theoretical and experimental studies have been carried out. Th presented results how the improved performance in the position control of automation system.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.443-450
• /
• 2010

An enhanced control strategy for variable-speed unbalanced stand-alone doubly-fed induction generator-based wind energy conversion systems is proposed in this paper. The control scheme is applied to the rotor-side converter to eliminate stator voltage imbalance. The proposed current controller is developed based on the proportional-resonant regulator, which is implemented in the stator stationary reference frame. The resonant controller is tuned at the stator synchronous frequency to achieve zero steady-state errors in rotor currents without decomposing the positive and negative sequence components. The computational complexity of the proposed control algorithm is greatly simplified, and control performance is significantly improved. Finally, simulations and experimental results are presented to verify the feasibility and the robustness of the proposed control scheme.

• 연구논문집
• /
• 통권33호
• /
• pp.81-88
• /
• 2003

A metal jet printing system based on ink jet printing technique is one of the effective equipments for manufacturing elements of display devices, electrical devices, information processing systems, and so on. In order to develop an actuator of the metal jet printing system, bimorph type PZT actuator(length 25.2mm, width 7.2mm, thickness 0.5mm, shim thickness 0.2mm) and its controller(voltage range $\pm24v$, built-in fast recovery diode) were suggested and investigated. Performance tests and characteristic analysis, such as displacement, force, hysteresis and frequency, were carried out. The results show that the suggested actuator and controller are suitable for the metal jet printing system.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.161-169
• /
• 2013

This paper proposes a novel control strategy for a unified power quality conditioner (UPQC) including a series and a shunt active power filter (APF) to compensate the harmonics in both the distorted supply voltage and the nonlinear load current. In the series APF control scheme, a proportional-integral (PI) controller and a resonant controller tuned at six multiples of the fundamental frequency of the network ($6{\omega}_s$) are performed to compensate the harmonics in the distorted source. Meanwhile, a PI controller and three resonant controllers tuned at $6n{\omega}_s$(n=1, 2, 3) are designed in the shunt APF control scheme to mitigate the harmonic currents produced by nonlinear loads. The performance of the proposed UPQC is significantly improved when compared to that of the conventional control strategy thanks to the effective design of the resonant controllers. The feasibility of the proposed UPQC control scheme is validated through simulation and experimental results.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.387-396
• /
• 2013

This paper investigates the droop control of parallel inverters for an islanded mode of microgrid. Frequency and voltage droop control is one of power control and load demand sharing methods. However, although the active power is properly shared, the reactive power sharing is inaccurate with conventional method due to the unequal line impedances and the power coupling of active - reactive power. In order to solve this problem, an improved droop method with virtual inductor concept and a voltage and current controller properly designed have been considered and analyzed through the PSiM simulation. The performance of improved droop method is analyzed in not only low-voltage line but also medium voltage line.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.151-156
• /
• 2002

The output voltage of Synchronous Generator is regulated constantly by field current control in excitation system. A synchronous generator is equipped with an automatic voltage regulator(AVR), which is responsible for keeping the constant output voltage under normal operating conditions about various levels. High frequency PWM converter (Current Mode Control Buck converter) type excitation system for synchronous generator is able to sustain output voltage level properly when the fault condition happened. This paper deals with the design and evaluation of the excitation system controller for a synchronous generator to improve the steady state and transient stability. The simulation and experimental results show that the proposed excitation system is improve the respons time by the AVR(automatic voltage regulator) of 50kW synchronous generator that is applied the current mode control excitation system.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.46-52
• /
• 2021

This study proposes a feedforward compensation control method to reduce 120 Hz output voltage ripple in a single-phase AC/DC rectifier system composed of PFC and LLC resonant converters. The proposed method compensates for the voltage ripple of the DC-link by using the AC input and DC output power difference, and then reduces the final output voltage ripple component of 120 Hz through feedforward compensation based on the linearized frequency gain curve of the LLC resonant converter. Through simulation and experimental results, the validity of the ripple reduction performance was verified by comparing the conventional PI controller and the proposed feedforward compensation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1954-1956
• /
• 1997

In this paper, a variable structure current control scheme for field-oriented induction motor drive is presented. The current controller based on space voltage vector PWM scheme consists of feedforward, decouple and variable structure control. The proposed current controller tracks reference value quickly, has robust property against parameter variation and disturbance, reduces switching frequency and improves performance of induction motor drive. Finally, the proposed current controller is verified by digital simulation

• 한국정보통신학회논문지
• /
• 제14권10호
• /
• pp.2299-2304
• /
• 2010

유도 모터의 센서리스벡터 제어시스템은 모터의 시정수를 이용하여 자극의 위치를 추정하는 제어 시스템으로서 중 고속영역의 경우 벡터 제어가 잘 구현된다. 그러나 저속의 경우 모터로부터 얻는 전압정보가 너무 작아서 벡터 제어기의 구현이 어렵다. 본 논문에서는 슬립 주파수 추정을 이용하여 저속에서의 센서리스벡터제어 문제점을 개선시켜 광범위한 속도 영역에서 벡터제어가 가능한 센서리스 벡터제어기를 설계하였다. 제어기의 성능은 실험을 통하여 확인하였다.