• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.23-35
• /
• 1994

To investigate phytotoxic substances in Artemisia argyi, the donor plant, and their biological activities, seed germination and seedling growth of receptor plants such as Arundinella hirta, Echinochloa crus-galli, Rumex crispus and Lactuca sativa were examined at different concentrations of aqueous extracts of the donor plant. Germination of four receptor species was inhibited by the extracts, while seedling growth was decreased to a lesser degree than in the germintion test. Germination, seedling growth and dry weight growth of Achyranthes japonica grown in pot were proportionally inhibited by the extracts. Volatile substances emitted from A, argi plant caused slight inhibition in the germination and seedling growth of the receptor species. Essential oil of the plant extracted by Karlsruker's apparatus inhibited growth of microorganisms and callus growth of Pinellia ternata and Oryza sativa. The GC /MS method was employed for analysis and identification of allelochemicals from A. argyi leaves. Sixty-one chemical substances such as a-pinene, camphene, 1. 8-cineol, etc. were identified from essential oil of A. argyi. The results of this experiment on seed germination, seedling growth, microorganism culture and tissue culture indicated that naturally occurring chemical substances from A. argyi would be responsible for the growth inhibition of plants studied.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.89-95
• /
• 2017

Although the global coffee market is growing every year and the demand for coffee wrapping paper is increasing accordingly, research on the effect of PE material and PP material on the coffee aroma used in the sealant layer, which will directly contact the product, is lacking. In this study, we studied the change of aroma patterns and flavor materials by adding coffee to PP and PE pouches. In addition, we observed changes in aroma patterns depending on the temperature and the presence of the deoxidizer. As a result, it was found that the PP type packaging material was slightly better than the PE type packaging material, but the performance was hardly changed by the material. Rather, the change in the aroma pattern due to temperature was dominant rather than the material. It is ideal that refrigerated distribution ($4^{\circ}C$) is the best storage temperature and sales are done within a short period of time. Among the indicators, pyridine was the most suitable material to study and there are many data about pyridine. Therefore, it is expected that the results can be derived by using pyridine.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.373-378
• /
• 1993

A rapid gas chromatographic profiling method for the simultaneous analysis of free fatty and other acids was applied to vegetable oils. Oil samples were dissolved in dichloromethane and the free acids were extracted with saturated $NaHCO_3$ solution. The aqueous extract was acidified and then loaded onto the Chromosorb P column for the extraction. The acids were eluted with diethyl ether selectively from Chromosorb P column and were treated with triethylamine to prevent the losses of volatile acids. Several long chain fatty acids were detected from soybean oil, rice-bran oil, sesame oil and perilla oil. Various organic acids including odd number fatty acids were detected in crude oil, especially sesame oil. Arachidic acid from perilla oil and vanillic acid from sesame oil, which were not reported before were detected. The content ratio of free linoleic acid to oleic acid was $1.02{\sim}1.18$, which was similar to the reported data. When the GC profile of organic acids were simplified to their corresponding retention index spectra of bar graphical forms, they presented characteristic pattern of each vegetable oil that can be quickly recognized.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.280-289
• /
• 2015

Anaerobic digestion is an efficient and renewable energy technology that can produce biogas from a variety of biomasses such as animal manure, food waste and plant residues. In developing countries this technology is widely used for the production of biogas using local biomasses, but there is little information about the value of these biomasses for energy production. This study was therefore carried out with the objective of estimating the biogas production potential of typical Vietnamese biomasses such as animal manure, slaughterhouse waste and plant residues, and developing a model that relates methane ($CH_4$) production to the chemical characteristics of the biomass. The biochemical methane potential (BMP) and biomass characteristics were measured. Results showed that piglet manure produced the highest $CH_4$ yield of 443 normal litter (NL) $CH_4kg^{-1}$ volatile solids (VS) compared to 222 from cows, 177 from sows, 172 from rabbits, 169 from goats and 153 from buffaloes. Methane production from duckweed (Spirodela polyrrhiza) was higher than from lawn grass and water spinach at 340, 220, and 110.6 NL $CH_4kg^{-1}$ VS, respectively. The BMP experiment also demonstrated that the $CH_4$ production was inhibited with chicken manure, slaughterhouse waste, cassava residue and shoe-making waste. Statistical analysis showed that lipid and lignin are the most significant predictors of BMP. The model was developed from knowledge that the BMP was related to biomass content of lipid, lignin and protein from manure and plant residues as a percentage of VS with coefficient of determination (R-square) at 0.95.This model was applied to calculate the $CH_4$ yield for a household with 17 fattening pigs in the highlands and lowlands of northern Vietnam.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.807-817
• /
• 2008

Steers with ad libitum access to rice straw were assigned to four diets to evaluate the effects of maize or soybean hull supplementation on intake, in vivo digestibility, ruminal pH, VFA, ammonia-nitrogen ($NH_3-N$) and in situ ruminal disappearance of feed nutrients by cattle consuming rice straw. Supplement treatments were: no supplement (RS); soybean meal at 0.127% BW (SBM); cracked maize at 0.415% BW plus 0.044% BW soybean meal (MAIZE); or soybean hulls at 0.415% BW plus 0.044% BW soybean meal (HULLS). The MAIZE and HULLS diets were formulated to provide approximately 4 MJ of $NE_m$ per kg of diet. Rice straw DMI was not affected (p = 0.34) by supplement. Apparent dry matter (DM) digestibility was greater (p<0.001) for MAIZE and HULLS (56.6 and 60.0%, respectively) than for steers consuming SBM or RS (51.8 and 44.4%, respectively). Apparent NDF digestibility was greater (p<0.0004) for HULLS than MAIZE (61.7 vs. 58.0%, respectively) and apparent ADF digestibility was greater (p<0.0008) for HULLS than MAIZE (61.1 vs. 49.2%, respectively). There was no difference in apparent hemicellulose digestibility (p = 0.43). Analysis of ruminal fluid collected 0, 2, 4, 6, and 8 h post-feeding revealed ammonia-nitrogen was greatest (p<0.05) for steers on SBM and HULLS diets at 2 h (24.08 and 22.57 mg/dl, respectively) and total volatile fatty acids was greatest (p<0.05) for HULLS at 4 h (230 mM/L). In situ disappearance, measured at 0, 2, 4, 6, 8, 16 and 24 h, indicated that SBM, MAIZE and HULLS tended to enhance the digestibility of DM and fiber components of rice straw. In situ disappearance of rice straw DM was greatest for SBM and/or HULLS from 4 to 24 h (p = 0.03). Rice straw NDF and ADF disappearance was enhanced by supplementation from 16 to 24 h (p<0.02). Rice straw DM, NDF and ADF disappearances at 24 h were similar for MAIZE and HULLS treatments. When feeding cattle rice straw diets, energy and protein-based supplements are essential. This study showed that fiber-based supplements are just as, if not more, effective as starch-based supplements in rice straw utilization. This study shows that soybean hulls, in spite of their high fiber content, are as efficient as maize for supplementing rice straw primarily because fiber in soybean hulls is highly digestible as shown by in vivo digestibility and in situ disappearance.

• Atmosphere
• /
• v.27 no.1
• /
• pp.41-54
• /
• 2017

Organic carbon (OC) and elemental carbon (EC) in $PM_{2.5}$ were measured using Sunset OC/EC Field Analyzer at Seoul Hwangsa Monitoring Center from March to April, 2016. The mean concentrations of OC and EC during the entire period were $4.4{\pm}2.0{\mu}gC\;m^{-3}$ and $1.4{\pm}0.6{\mu}gC\;m^{-3}$, respectively. OC/EC ratio was $3.4{\pm}1.0$. The average concentrations of $PM_{10}$ and $PM_{2.5}$ were $57.4{\pm}25.9$ and $39.7{\pm}19.8{\mu}g\;m^{-3}$, respectively, which were detected by an optical particle counter. The OC and EC peaks were observed in the morning, which were impacted by vehicle emission, however, their diurnal variations were not noticeable. This is determined to be contributed by the long-range transported OC or secondary formation via photochemical reaction by volatile organic compounds at afternoon. A conditional probability function (CPF) model was used to identify the local source of pollution. High concentrations of $PM_{10}$ and $PM_{2.5}$ were observed from the westerly wind, regardless of wind speed. When wind velocity was high, a mixing plume of dust and pollution during long-range transport from China in spring was observed. In contrast, pollution in low wind velocity was from local source, regardless of direction. To know the effect of long-range transport on pollution, a concentration weighted trajectory (CWT) model was analyzed based on a potential source contribution function (PSCF) model in which 75 percentiles high concentration was picked out for CWT analysis. $PM_{10}$, $PM_{2.5}$, OC, and EC were dominantly contributed from China in spring, and EC results were similar in both PSCF and CWT. In conclusion, Seoul air quality in spring was mainly affected by a mixture of local pollution and anthropogenic pollutants originated in China than the Asian dust.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.288-303
• /
• 2012

In this study, real time measurements of particle number size distribution in urban Gwangju, coastal Taean, and industrial Yeosu in Korea were conducted in 2008 to understand the occurrence of ultrafine particle (UFP) (<100 nm) events, the variation of its concentration among different sampling sites, and UFP formation pathways. Also, to investigate seasonal and long-term variation of the UFP number concentration, data were collected for the period of 5 years (2007, 2008, 2010, 2011, and 2012) in urban Gwangju. Photochemical and combustion events were found to be responsible for the formation of UFP in the urban Gwangju site, whereas only photochemical event led to the formation of UFP in the coastal Taean site. The highest UFP concentration was found in industrial Yeosu (the average UFP number fractions were 79, 59 and 58% in Yeosu, Gwangju, and Taean, respectively), suggesting that high amount of gas pollutants (e.g., $NO_2$, $SO_2$, and volatile organic carbon (VOC)) emitted from industries and their photochemical reaction contributed for the elevated UFP concentration in the industrial Yeosu site. The UFP fraction also showed a seasonal variation with the peak value in spring (61.5, 54.5, 50.5, and 40.7% in spring, fall, summer, and winter, respectively) at urban Gwangju. Annual average UFP number concentrations in urban Gwangju were $5.53{\times}10^3\;cm^{-3}$, $4.68{\times}10^3\;cm^{-3}$, $5.32{\times}10^3\;cm^{-3}$, $3.99{\times}10^3\;cm^{-3}$, and $2.16{\times}10^3\;cm^{-3}$ in the year 2007, 2008, 2010, 2011, and 2012, respectively. Comparison of the annual average UFP number concentration with urban sites in other countries showed that the UFP concentrations of the Korean sites were lower than those in other urban cities, probably due to lower source strength in the current site. TEM/EDS analysis for the size-selected UFPs showed that the UFPs were classified into various types having different chemical species. Carbonaceous particles were observed in both combustion (soot and organics) and photochemical events (sulfate and organics). In the photochemical event, an internal mixture of organic species and ammonium sulfate/bisulfate was identified. Also, internal mixtures of aged Na-rich and organic species, aged Ca-rich particles, and doughnut shaped K-containing particles with elemental composition of a strong C with minor O, S, and K-likely to be originated from biomass burning nearby agricultural area, were observed. In addition, fly ash particles were also observed in the combustion event, not in the photochemical event.

• The Journal of Korean Medicine
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2010

Objective: The aim of this prospective, case-controlled study was to assess the difference of the amount of tongue coating between halitosis and non-halitosis patients using a digital tongue diagnosis system (DTDS). Methods: Sixty-five patients complaining of oral malodor were recruited for the study. The level of volatile sulfur compounds (VSC) in the oral cavity of the patients was measured by a portable gas chromatography. All patients were then divided into two groups, the halitosis group ($H_2S{\geq}1.5ng$/10ml, or $CH_3SH{\geq}0.5ng$/10ml) and the non-halitosis group ($H_2S$<1.5ng/10ml and $CH_3SH$<0.5ng/10ml), according to the VSC level criteria published by Tonzetich. Tongue images of the two groups were acquired and analyzed by DTDS, followed by the analysis of the tongue coating scores. Results: The tongue coating scores of the halitosis group were significantly higher than of the non-halitosis group (P=0.033). Furthermore, the difference of the posterior tongue coating between the two groups was more significant (P=0.000). Conclusions: Halitosis patients were shown to have a thicker tongue coating than those in the non-halitosis group. Moreover, the posterior dorsum of the tongue should be observed more cautiously when dealing with halitosis patients. Also, the progress and state of the patient's symptom of halitosis as diagnosed objectively by the portable gas chromatography could also possibly be analyzed instead by the DTDS tongue coating score.

• Environmental Analysis Health and Toxicology
• /
• v.10 no.1_2
• /
• pp.1-14
• /
• 1995

The purpose of this research is to assess the health risk of pollutants in drinking water and recommend the guidelines and management plans for maintaining good quality of drinking water. This study has been funded as a national project for three years from 1992 to 1995. This study(the second year, 1993-1994) was conducted to monitor 32 species of carcinogenic chemicals such as volatile organic compounds(VOCs), polynuclear aromatic hydrocarbons(PAHs), pesticides and heavy metals of drinking water at some area in six cities of Korea, and evaluate health risk due to these chemicals through four main steps of risk assessment in drinking water. In hazard identification, 32 species of carcinogenic chemicals were identified by the US EPA classification system. In the step of exposure assessment, sampling of raw, treated and tap water from the public water supply system had been conducted from 1993 to 1994, and 32 chemicals were analyzed. In dose-response assessment, cancer potencies, unit risk estimates and virtually safe doses of carcinogens were obtained by TOX-RISK (Version 3.1). In risk characterization of detected chemicals, health risk due to carcinogens such as vinyl chloride, carbon tetrachloride, dichloromethane, 1, 2-dichloromethane, chloroform, benzene and arsenic of tap water in several cities exceeded 10$^{-5}$ level. We suggest that non-regulated chemicals which exceed 10$^{-5}$ excess cancer risk level, such as vinyl chloride, carbon tetrachloride and 1, 2-dichloroethane, should be monitored periodically and be regulated by the Drinking Water Management Act, and database for exposure parameter of our own situation should be established.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.415-421
• /
• 2013

To increase specific surface property of activated carbon fiber(ACF), chemical activation(CA) using alkali metals and surface treatment(ST) using oxidant was widely used. The CA and ST process developed micro-pore on the surface of ACF by chemical reaction of the alkali metals and oxidative of oxidant, respectively. To improve the efficiency of CA process for developing micro-pores on the surface of ACF, the ST process was adopted as an pre-treatment method. After treatment of ST process, ACF properties was investigated depending on the ST pre-treatment process. FT-IR, TG and elemental analysis of the ACF are carried out, and an adsorption property of ACF was also evaluated using toluene(which in typical volatile organic matter). Once the single CA process is used, the surface area and adsorption capacity of ACF were increased from 1,483 to 1,988 $m^2/g$ and from 0.22 to 0.27 $g_{-Tol.}/g_{-ACF}$, respectively. On the other hands, once the ST and CA processes are used successively, the surface area and adsorption capacity of ACF are greatly increase(where the surface area is 2,743 $m^2/g$ and the adsorption capacity is 0.37 $g_{-Tol.}/g_{-ACF}$). It indicates that the combined process of ST and CA can improve the surface process properties of ACF.