• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.561-564
• /
• 2009

A cryptographic dongle, which is capable of transmitting encrypted voice signals over the CDMA/GSM voice channel, was designed and implemented. The dongle used PIC microcontroller for signals processing including analog to digital conversion and digital to analog conversion, encryption and communicating with the smart phone. A smart phone was used to provide power to the dongle as well as passing the encrypted speech to the smart phone which then transmits the signal to the network. A number of tests were conducted to check the efficiency of the dongle, the firmware programming, the encryption algorithms, and the secret key management system, the interface between the smart phone and the dongle and the noise level.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.2
• /
• pp.82-94
• /
• 2007

Wireless sensor networking technology is one of the basic infrastructures for ubiquitous environment. It enables us to gather various sensory data such as temperature, humidity, gas leakage, and speed from the remote sensor devices. To support these networking functions, IEEE WPAN working group makes standards for PHY and MAC, while ZigBee Alliance defines the standards for the network, security, and applications. The low-rate WPAN was emerged to have the characteristics of network resilience, low cost, and low power consumption. It has a broad range of applications including, but not limit to industrial control and monitoring, home automation, disaster forecast and monitoring, health care. In order to provide more intelligent and robust services, users want voice-based solutions to accommodate to low-rate WPAN. In this paper, we have evaluated voice quality of an IEEE 802.15.4 standard compliant voice node. Specifically, it includes the design of a voice node and experiments based on the prediction of voice quality using the E-model suggested by ITU-T G.107, and the network communication mechanisms considering beacon-enabled and nonbeacon-enabled networks for real-time voice communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.804-811
• /
• 1997

In the CDMA mobile communication system, reverse power control can be used to minimize the interference level for a good quality of the voice channel, and used to maxmize the system capacity. In this paper, we have analyed the environment of the K-parameter and the access procedure for the mobile station, and proposed a new algorithm for the access probe procedure of the station. K-parameter is determined according to the environment of the base station and access probe can adaptively control the power according to the position changes of the mobile station or the rapid and various state changes of the channel. Simulation results in the limited test environment show that it can increase the system capacity and decrease the power comsumption of the mobile station while maintaining the good and stable quality of the voice channel.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2012

The voice coil linear force motor is a kind of a direct drive motion device that uses a permanent magnetic field and coil winding to produce force. In order to design a voice coil linear force motor, an exact calculations of the required force, the flux density in air gap and the flux pathway are needed. A conventional method can be used usually to calculate the flux density in air gap, but with this method it is needed to find a magnetic circuit revision constant. In this paper a voice coil linear force motor is designed by conventional design method and analyzed by 3D simulation program "Flux". For the prototype linear force motor, the results of the calculated by conventional design method and the analyzed by 3D simulation program are compared with the test result. Finally it is showed that the magnetic circuit revision constant which is found by comparing of the analyzed and the measured data can be used for the design of the voice coil type linear force motor to minimize the trial and error.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.56-62
• /
• 2013

Recently with smart phones and tablets, next generation mobile communication systems have supported various multimedia contents services. Thus, multimedia communication systems have been gradually increased compared to voice communication systems. Since the growth of multimedia services has increased users' duration on systems and decreased systems' effectiveness on power, a study on effective usage of power needs to be researched. Furthermore, radio shadow areas under heavy urban environments have generated unnecessary power consumption which reduces the usage duration of power on next generation mobile communication systems. This paper has reviewed the communication network architecture on next generation mobile communication systems and the unnecessary power consumption in radio shadow areas. This paper has also proposed the method of the effective power usage and analyzed the effective power usage on next generation mobile communication systems with simulation.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.2
• /
• pp.42-53
• /
• 2014

Robust voice recognition (RVR) is essential for a robot to communicate with people. One of the main problems with RVR for robots is that robots inevitably real environment noises. The noise is captured with strong power by the microphones, because the noise sources are closed to the microphones. The signal-to-noise ratio of input voice becomes quite low. However, it is possible to estimate the noise by using information on the robot's own motions and postures, because a type of motion/gesture produces almost the same pattern of noise every time it is performed. In this paper, we propose an RVR system which can robustly recognize voice by adults and children in noisy environments. We evaluate the RVR system in a communication robot placed in a real noisy environment. Voice is captured using a wireless microphone. Navigation Strategy is shown Obstacle detection and local map, Design of Goal-seeking Behavior and Avoidance Behavior, Fuzzy Decision Maker and Lower level controller. The final hypothesis is selected based on posterior probability. We then select the task in the motion task library. In the motion control, we also integrate the obstacle avoidance control using ultrasonic sensors. Those are powerful for detecting obstacle with simple algorithm.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1181-1186
• /
• 2022

In this study, we have researched for a high-efficiency display with low power, less complicated configuration, and more attractive features than using conventional displays (CRT, LCD, LED, etc.) by manufacturing a propeller display using the POV(Persistence of Vision) phenomenon. After setting the reference point using the Hall sensor, the channel recognition signal and voice recognition signal are transmitted to the display using Bluetooth through the mobile phone application created based on the App program, and the display performs different operations according to the commanded Bluetooth signal. Finally, it was confirmed that the desired information is expressed on the display screen at a motor speed of 1,030 rpm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.413-420
• /
• 2020

The Tactical Information and Communication Network system provides real-time multimedia services such as voice and data by utilizing the Mobile Subscriber Access Point. At this time, an external transmission path is constructed through the Low Capacity Trunk Radio and the High Capacity Trunk Radio system. The communication devices of each wireless transmission system are mounted on a tactical vehicle and a secondary battery is used to prevent a power interruption when the supply power to the tactical vehicle is transferred to the integrated power control device. In this paper, the basic design of the Wireless Power Transfer device for charging the battery of the integrated power control system of the mobile base station system using the Loading Distribution Method and checking the number of primary windings and the core material selection by the air gap through the Finite Elements Method.

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.19-25
• /
• 2010

We developed a RFID terminal to voice guide the blind who have difficulties in reaching out to the pharmaceutical information. In this work, we used RFID technology to instruct the pharmaceutical information to the blind. The voice guidance reader was made to read the RFID tag attached to the drugs and announced the pharmaceutical information matching to the tag specific ID. We had the reader to obtain the pharmaceutical information from the ezDrug site operated by Korea Food & Drug Association. The voice guidance reader was fabricated as necklace type for the easy carry, and we added mp3 player as dual uses. ARM series Cortex M3 chip was used for the reader's core chip and low power MFRC523 chipset of NXP was used to construct RFID circuit. MFRC523 chip uses low power to meet the mobile application. We used VS1003B MP3 Decoder IC to make the voice generation circuit and CC2500 chipset for the wireless communication to the pharmaceutical information server. We also developed the system that can support ISO 14443A type and ISO 14443B type so that the system can be used to extend to various RFID protocols. Utilization of this system can conveniently convey the pharmaceutical information to the blind and reduce the drug abuse.