• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.127-138
• /
• 2000

Differential equations and their solutions were formulated to describe the deflection of both temples and front frames and the pressure exerted by them varying parameters such as elastic modulus, thickness, length, width and shape of crosssection. The effect of such parameters on the deflections of both temples and front frames was illustrated by plotting the solutions of the derived equations. Deflection of temples was found to be maximum where the cross section was diamond-shaped and to be minimum with the rectangular cross section while thickness and cross section area of temples remain constant. The effect of parameters consisting of front frame on the deflection of front frames are very similar to those on temples. The central deflection and pressure of front frame initiated by the temple decreases as the length of temple increases. Detailed analysis of stresses at various parts of the temple will help design custom made spectacle frame as well as most comfortable frames.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.240-247
• /
• 2013

This paper proposes an optimal three-dimensional coordinate implementation of the vision sensor using two CCD cameras. The PBVS (Position based visual servoing) is implemented using the positional information obtained from images. Stereo vision by PBVS method that has enhanced every frame using calibration parameters is effective in the distance calculation. The IBVS (Image based visual servoing) is also implemented using the difference between reference and obtained images. Stereo vision by IBVS method calculates the distance using rotation angle of motors that correspond eyes and neck without enhanced images. The PBVS method is compared with the IBVS method in terms of advantages, disadvantages, computing time, and performances. Finally, the IBVS method is applied for the dual arm manipulator on the mobile inverted pendulum. The autonomous mobile inverted pendulum is successfully demonstrated using the center of the manipulator's mass.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.743-744
• /
• 2008

By using DirectX technology, an improved Visual Monitoring System implemented in this paper. The proposed Visual Monitoring System is developed based on the S3C2440 processor. The Windows CE 5.0 is adopted as an operating system, and Visual Monitoring System transfer image 15 frame per second using UDP/IP and by using AdaBoost Algorithm, detect face region and save face image.

• Journal of Korea Multimedia Society
• /
• v.22 no.4
• /
• pp.417-423
• /
• 2019

This paper presents an evaluation system to determine the completeness of a space map obtained by a visual SLAM(Simultaneous Localization And Mapping) algorithm. The proposed system consists of three parts. First, the proposed system detects the occurrence of loop closing to confirm that users acquired the information from all directions. Thereafter, the acquired map is divided with regular intervals and is verified whether each area has enough map points to successfully estimate users' position. Finally, to check the effectiveness of each map point, the system checks whether the map points are identifiable even at the location where there is a large distance difference from the acquisition position. Experimental results show that space maps whose completeness is proven by the proposed system has higher stability and accuracy in terms of position estimation than other maps that are not proven.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.86-95
• /
• 1998

Intra-frame video compression, which cannot make use of temporal predictions, requires much higher bit rates compared with inter-frame schemes. In order to reduce bit rates, intra-frame predictive coding methods in DCT domain have been studied especially within the framework of the MPEG-4 video coding standard currently being developed. In this paper, we propose novel intra-frame predictive coding methods in DCT domain with the marginal complexity increase over the conventional methods . The proposed methods consist of a DC coefficient prediction method and two AC coefficient prediction methods. The proposed methods consist of a DC coefficient prediction method and two AC coefficient prediction methods. The proposed DC coefficient prediction method makes it possible to adaptively select the prediction directions without overhead bits, by comparing gradients of DC coefficients from neighboring blocks. As the AC coefficient prediction methods, first, we present an effective method which can improve the prediction directions of the MPEG-4 scheme by considering the DC coefficient of the current block to be coded. And, we present another effective method that decision on the prediction is carried out for each AC coefficient. Simulation results show that substantial bit savings can be achieved by the proposed methods.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.9-12
• /
• 2008

Purpose: Current gas-mask is very uncomfortable structure for spectacles wearer. Improving this problem can aid military men and firemen to protect themselves and rescue other person. Methods: we changed the structure from dual type of outward lens and inward lens into a single type structure. we attached acrylic frame to gas-mask instead of outward lens and protected the gas inflow by shutting the gab of lens and frame using silicon shield, and made the frame "S" style for removing astigmatism and maintaining of vertex distance. Results: It was possible to correct visual acuity and gas shield, and could changed the lens like a common spectacles. The new type of gas-mask spectacles could remove 0.53D~1.78D astigmatism occurred from the slant of eyesight and lens surface, 0.07D~0.66D overcorrection occurred from short vertex distance, and 0.1D~0.3D astigmatism occurred from pantoscopic angle. Conclusion: Because new type of gas-mask spectacles had clear visual field, it was expected to improve fighting power and rescue ability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.1
• /
• pp.98-109
• /
• 2001

This study aimed to investigate the effect of revegetation technique for water attacking point using waterlogged prevention frame revetment. In this study, we evaluate frame revetment stability, water quality, plant growth and ecological and envirnomental changes in Mooshim streamside landscape. The results are as follows; 1) The waterlogged prevention frame revetment appeared to be stable despite of two big floods. The materials used for the revetment were not eroded on the water attacking point. Thus, we confirmed the effect of scour prevention of the frame work. 2) The effects of the frame revetment on the water quality appeared to be good for the surrounding environment. Dissolved Oxygen(DO) was higher about $0.4{\sim}0.6mg/{\ell}$ at the frame revetment than that of the main stream flow. pH value was lower about 0.4~0.5. Electric Conductivity(EC) showed lower about $0.8{\sim}1.1{\mu}s/cm$. at submersion prevent frame than the low-flow of the stream. Turbidity was lower about $0.6{\sim}1.2mg/{\ell}$. 3) As the effects on ecological and environmental conditions, we discovered a number of carassius auratus and Zacco platypus in the frame revetment area. Also, sympetrum balteata, coenagrionidae was observed frequently. 4) The plant growth did not appear to tumble or wither despite of two big floods. The visual rating of plant growth was evaluated as medium (around 5 point) 5) The landscape analysis derived four factors(i.e. the harmony, the variation, the flexibility and the provincial characteristics) from the factor analysis.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.3
• /
• pp.259-267
• /
• 2023

Objective: Rehabilitative ultrasound imaging is a safe and noninvasive technique for evaluating muscle thickness. A dual probe-fixing frame (DPF) can provide visual feedback during exercises targeting specific muscles. The purpose of this research was to verify the reliability and validity of the DPF for dual-probe ultrasound (DPU)-based visual feedback exercises, allowing users to use both hands freely. Design: This cross-sectional study used repeated measures to compare muscle thickness measurements obtained using the handheld device and DPF with DPU. Methods: Twenty healthy adults participated in the study. Measurements were taken over two sessions, with a two-day interval between the sessions. The thicknesses of the rectus abdominis (RA) and transverse abdominis (TrA) muscles were measured using DPU. The DPF with DPU developed by the research team, was used along with a laptop-based muscle viewer. Bland-Altman analysis and intraclass correlation coefficients (ICCs) calculations were used in statistical analyses to evaluate agreement and reliability, respectively. Results: The results of the Bland-Altman analysis showed small average differences between the handheld and DPF methods for both RA and TrA muscle thicknesses. Inter-rater reliability analysis showed high ICC values for DPF measurements of both RA (0.908-0.912) and TrA (0.892-741) muscle thicknesses. Intra-rater reliability analysis also showed good ICC values for measurements taken by a single examiner over two days. Conclusion: The findings of this study demonstrate that the DPF provides reliable and valid measurements of muscle thickness during visual feedback exercises using the DPU.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2013

Motion-compensated frame interpolation (MCFI) techniques in video signal processing have many application areas. Frame rate up-conversion (FRUC) or distributed video coding (DVC) technique needs an effective MCFI algorithm. For these applications, it is necessary to develop an effective post-processing technique to improve visual qualities or to reduce virtual channel noises, resulting in the reduced channel bit rate. This paper proposes a reliability evaluation method based on spatio-temporal characteristics for motion-compensated interpolated blocks. The proposed algorithm investigates the temporal matching characteristics for current frame and then is designed in such a way that it can measure temporal characteristics as well as the spatial ones. Through computer simulations, it is shown that the proposed method outperforms the conventional temporal matching method.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.201-206
• /
• 2011

FRUC (Frame Rate Up-Conversion) technique needs an effective frame interpolation algorithm using motion information between adjacent neighboring frames. In order to have good visual qualities in the interpolated frames, it is necessary to develop an effective detection and interpolation algorithms for occluded regions. For this aim, this paper proposes an effective occluded region detection algorithm through the adaptive forward and backward motion searches and also by introducing the minimum value of normalized cross-correlation coefficient (NCCC). That is, the proposed scheme looks for the location with the minimum sum of absolute differences (SAD) and this value is compared to that of the location with the maximum value of NCCC based on the statistics of those relations. And, these results are compared with the size of motion vector and then the proposed algorithm decides whether the given block is the occluded region or not. Furthermore, once the occluded regions are classified, then this paper proposes an adaptive interpolation algorithm for occluded regions, which still exist in the merged frame, by using the neighboring pixel information and the available data in the occluded block. Computer simulations show that the proposed algorithm can effectively classify the occluded region, compared to the conventional SAD-based method and the performance of the proposed interpolation algorithm has better PSNR than the conventional algorithms.