• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.159-166
• /
• 1999

A system to extract continuously the real 3-D geometric fearture information from 2-D image of an object, which is fed randomly via conveyor has been developed. Two sets of structured laser lightings were utilized. And the laser structured light projection image was acquired using the camera from the signal of the photo-sensor mounted on the conveyor. Camera coordinate calibration matrix was obtained, which transforms 2-D image coordinate information into 3-D world space coordinate using known 6 points. The maximum error after calibration showed 1.5 mm within the height range of 103mm. The correlation equation between the shift amount of the laser light and the height was generated. Height information estimated after correlation showed the maximum error of 0.4mm within the height range of 103mm. An interactive 3-D geometric feature extracting software was developed using Microsoft Visual C++ 4.0 under Windows system environment. Extracted 3-D geometric feature information was reconstructed into 3-D surface using MATLAB.

• 한국철도학회논문집
• /
• 제15권4호
• /
• pp.381-387
• /
• 2012

본 논문에서는 서울지하철 5~8호선에 운영 중인 터널모니터링 시스템의 운영성과를 분석 평가하고 개선방안을 제시하였다. 터널모니터링 시스템 도입으로 종래에는 열차운행이 끝나야만 가능했던 터널 내 시설물 점검이 주간에도 가능해졌다. TMS 도입으로 전에 비해 점검능력이 확대되었고, 정확성도 향상되었으며, 점검주기가 단축되었다. 인력활용 효율이 향상되어 중요 시설물에 대한 점검과 유지보수에 인력을 추가로 배치할 수 있게 되었다. 그 결과 예방정비 건수는 225% 증가하였고, 열차운행 장애는 53% 감소하였다.

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.119-124
• /
• 2013

Recent increasing demand on the indoor localization requires more advanced and hybrid technology. This paper proposes an application of the hybrid indoor localization method based on a position-coded pattern that can be used with other existing indoor localization techniques such as vision, beacon, or landmark technique. To reduce the pattern-recognition error rate, the error detection and correction algorithm was applied based on Hamming code. The indoor localization experiments based on the proposed algorithm were performed by using a QCIF-grade CMOS sensor and a position-coded pattern with an area of $1.7{\times}1.7mm^2$. The experiments have shown that the position recognition error ratio was less than 0.9 % with 0.4 mm localization accuracy. The results suggest that the proposed method could be feasibly applied for the localization of the indoor mobile service robots.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.240-251
• /
• 2016

This paper presents a real-time indoor location and pose estimation method that utilizes simple artificial markers and image analysis techniques for the purpose of warehouse automation. The conventional indoor localization methods cannot work robustly in warehouses where severe environmental changes usually occur due to the movement of stocked goods. To overcome this problem, the proposed framework places artificial markers having different interior pattern on the predefined position of the warehouse floor. The proposed algorithm obtains marker candidate regions from a captured image by a simple binarization and labeling procedure. Then it extracts maker interior pattern information from each candidate region in order to decide whether the candidate region is a true marker or not. The extracted interior pattern information and the outer boundary of the marker are used to estimate location and heading angle of the localization system. Experimental results show that the proposed localization method can provide high performance which is almost equivalent to that of the conventional method using an expensive LIDAR sensor and AMCL algorithm.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1168-1172
• /
• 2011

Beam projector is popularly used for presentation. In order to pay attention to local area of the beam projector display, a laser pointer is used together with a pointing device(Mouse). Simple wireless presenter has limited functions of a pointing device such as "go to next slide" or "back to previous slide" in a specific application(Microsoft PowerPoint) through wireless channel; thus, there is inconvenience to do other tasks e.g., program execution, maximize/minimize window etc. provided by clicking mouse buttons. The main objective of this paper is to implement a multi-functional laser-pointer mouse that has the same functions of a computer mouse. In order to get position of laser spot in the projector display, an image processing to extract the laser spot in the camera image is required. In addition, we propose a transformation of the spot position into computer display coordinates to execute mouse functions on computer display.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1005-1013
• /
• 2008

This paper describes a new sensor system for 3D range measurement using the structured infrared light. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and the projected infrared light are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Identification of the cells from the pattern is the key issue in the proposed method. Several methods of correctly identifying the cells are discussed and verified with experiments.

• 제어로봇시스템학회논문지
• /
• 제20권12호
• /
• pp.1189-1195
• /
• 2014

This paper addresses a Moving Target Indication (MTI) algorithm which can be used for small Unmanned Aerial Vehicles (UAVs) equipped with image sensors. MTI is a system (or an algorithm) which detects moving objects. The principle of the MTI algorithm is to analyze the difference between successive image data. It is difficult to detect moving objects in the images recorded from dynamic cameras attached to moving platforms such as UAVs flying at low altitudes over a variety of terrain, since the acquired images have two motion components: 'camera motion' and 'object motion'. Therefore, the motion of independent objects can be obtained after the camera motion is compensated thoroughly via proper manipulations. In this study, the camera motion effects are removed by using wiener filter-based image registration, one of the non-parametric methods. In addition, an image pyramid structure is adopted to reduce the computational complexity for UAVs. We demonstrate the effectiveness of our method with experimental results on outdoor video sequences.

• 센서학회지
• /
• 제21권4호
• /
• pp.249-255
• /
• 2012

Among the human senses, olfactory information still does not have a proper data presentation method unlike that regarding vision and auditory information. It makes presenting the sense of smell into multimedia information impossible, which may be an exploratory field in human computer interaction. In this paper, we propose an olfactory information presentation method, which is a way to use smell as multimedia information, and show an application for scent generation and odor display using a web service. The olfactory information can present smell characteristics such as intensity, persistence, hedonic tone, and odor description. The structure of data format based on olfactory information can also be organized according to data types such as integer, float, char, string, and bitmap. Furthermore, it can be used for data transmitting via a web service and for odor display using a scent generator. The scent generator, which can display information of smell, is developed to generate 6 odors using 6 aroma solutions and a diluted solution with 14 micro-valves and a micropump. Throughout the experiment, we confirm that the remote user can grasp information of smell transmitted by messenger service and request odor display to the computer controlled scent generator. It contributes to enlarge existing virtual reality and to be proposed as a standard reference method regarding olfactory information presentation for future multimedia technology.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.85-92
• /
• 2005

This paper describes the recognition method of small-obstacles using a camera for a mobile robot in indoor environment. The technique of image processing using a camera has been widely used for an automaton of industrial system, an inspection of inferior goods, a lookout of an invader, and a vision sensor of intelligent robot. Mobile robot could meet small-obstacles such as a small plastic bottle of about 0.5 l in quantity, a small box of $7{\times}7{\times}7cm^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the recognition of small-obstacles using a camera and program. In this paper, 2-D image processing algorism and method fur recognition of small-obstacles using a camera for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could judge the size and the position of small-obstacles accurately.

• 한국정밀공학회지
• /
• 제32권12호
• /
• pp.1039-1047
• /
• 2015

Contact type sensors (e.g., displacement sensor and strain gauge) were typically used to evaluate the safety and mechanical properties in machines and construction. However, those contact type sensors have been constrained because of measurement problems such as surface roughness, temperature, humidity, and shape. The Digital Image Correlation (DIC) measurement system is a vision measurement system. This measurement system uses the taken image using a CCD camera and calculates the image correlation between the reference image and the deformed image under external force to measure the displacement and strain rates. In this paper, we discuss methods to improve the measurement precision of the digital image correlation measurement system. A tensile test was conducted to compare the precision improvement effects, by using the universal test machine and the DIC measurement system, with the use of subpixel algorithms, i.e., the Coarse Fine Search (CFS) algorithm and the Peak Finding (PF) algorithm.