• 센서학회지
• /
• 제23권5호
• /
• pp.349-355
• /
• 2014

In this paper, we developed a new method to transmit multiple visible light channels in time division mode using the AC power line frequency in order to prevent the crosstalk between adjacent optical signals. Synchronizing pulses are generated from the 220 V power line, and one pulse period is subdivided into several time slots for visible light channels. Each channel transmits data in a predefined time slot without interfering adjacent channels. In experiments, synchronizing pulses with a repetition rate of 240 Hz were generated from the 60 Hz power line, and three VLC channels with a bit rate of 9.6 kbps transmitted data independently using the time slots between synchronizing pulses. This configuration is very useful in constructing time division VLC networks for multiple sensors.

• 센서학회지
• /
• 제26권3호
• /
• pp.192-198
• /
• 2017

In this paper, we newly developed a passive transponder for visible light identification (VLID) using ultrasonic wave. The solar cell in the transponder receives the reader light and generates current for supplying power to the transponder circuit. At the same time the solar cell detects the interrogating signal in the visible light from the reader. The transponder recognizes the interrogating signal and generates the responding signal using ultrasonic wave. In experiments, we used 40 kHz ultrasonic wave for the responding signal from the transponder. The maximum read distance was about 3.4 m when the transponder was exposed to the reader light of 24W LED array.

• 센서학회지
• /
• 제22권6호
• /
• pp.421-427
• /
• 2013

In this paper, we introduce a new synchronous visible light communication system in which the synchronizing pulse and the data bits are simultaneously transmitted using a 3-level light signal. In the transmitter, the synchronizing pulse and the data bits modulate independently two identical visible LEDs, whose output lights add in free space, make 3-level optical signal. In the receiver, a photodiode detects the light and generates a 3-level output voltage, whose positive and negative part correspond to the synchronizing pulse and the data bits, respectively. The two signals are easily separated and recovered by a simple diode circuit. This configuration provides two independent VLC channels without any multiplexing technique, simplifies the circuit design and construction of synchronous VLC systems.

• 센서학회지
• /
• 제30권4호
• /
• pp.196-203
• /
• 2021

In this study, an optical identification system was developed, wherein visible light is used to transmit the interrogating signal, and infrared is used to send the response signal. In the reader, visible light from a light emitting diode (LED) array was modulated via modified pulse width modulation for flicker-free illumination and dimming control. Moreover, the duty factor of the dimming control time was employed to control the illumination from the LED. In the transponder, the spike signal in the output of the high-pass filter was utilized to recover the interrogating signal while preventing interference from the 120-Hz noise from adjacent lighting lamps. The illumination was controlled in 26-86% range of the constant wave LED illumination by changing the duty factor from 20% to 90%. This configuration is advantageous for the construction of optical identification systems for automatic security check and car fare calculation at toll gates or parking facilities.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.430-432
• /
• 2008

Visible channel calibration method using deep convective clouds (DCCs) is developed. The method has advantages that visible radiance is not sensitive to cloud optical thickness (COT) for deep convective clouds because visible radiance no longer increases when COT exceeds 100. Therefore, once DCCs are chosen appropriately, and then cloud optical properties can be assumed without operational ancillary data for the specification of cloud conditions in radiative transfer model. In this study, it is investigated whether IR measurements can be used for the selection of DCC targets. To construct appropriate threshold value for the selection of DCCs, the statistics of cloud optical properties are collected with MODIS measurements. When MODIS brightness temperature (TB) at 11 ${\mu}$ m is restricted to be less than 190 K, it is shown that more than 85% of selected pixels show COT ${\geq}$ 100. Moreover, effective radius ($r_e$) distribution shows a sharp peak around 20 ${\mu}m$. Based on those MODIS observations, cloud optical properties are assumed as COT = 200 and $r_e$ = 20 ${\mu}m$ for the simulation of MODIS visible (0.646 ${\mu}m$) band radiances over DCC targets.

• 센서학회지
• /
• 제27권3호
• /
• pp.175-181
• /
• 2018

In this paper, we introduce a new dimming control method in a visible light communication (VLC) system wherein byteinversion is adopted for flicker-free transmission. In the VLC transmitter, the original and the inverted data were sent sequentially and the remnant time in one period was used for the dimming control of the LED light. In the VLC receiver, only the original data was recovered using the gating signal whose width was the same as the length of the original data. In our experiments, the dimming control ranges were measured to be 22%-53%, 11%-76%, and 5%-88% of the CW LED light when the data rates were 9.6, 19.2, and 38.4 kbps, respectively. In this system, we used a 240-Hz sync pulse whose period was 4.16 ms, which was shorter than the maximum flickering time period of 5 ms that is generally considered to be safe. This configuration is very simple and useful in constructing indoor wireless sensor networks using the flicker-free LED lamps with dimming control capability.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.57-60
• /
• 2001

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Retrofitted concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, We try to detect peel out effect and find the strain difference between main structure and retrofitting patch material when they separate each other.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.149-152
• /
• 2005

In order to extend the life time of building and civil infra-structure, nowadays, patch type carbon sheets are widely used as repairing meterials. Repaired concrete columns and beams with carbon sheets gain their stiffness and strength, but they lose toughness and show brittle failure behaviors. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After repairing of the structure, crack visibility is blocked by repaired carbon sheets. Therefore, structural monitoring after repairing is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, peel-out effects is detected with optical fiber sensors and the strain difference between main structure and repaired carbon sheets when they separate each other.

• 센서학회지
• /
• 제28권3호
• /
• pp.152-156
• /
• 2019

An ultraviolet (UV) image sensor is an extremely important optoelectronic device used in scientific and medical applications because it can detect images that cannot be obtained using visible or infrared image sensors. Because photodetectors and transistors are based on different materials, conventional UV imaging devices, which have a hybrid-type structure, require additional complex processes such as a backside etching of a GaN epi-wafer and a wafer-to-wafer bonding for the fabrication of the image sensors. In this study, we developed a monolithic GaN UV passive pixel sensor (PPS) by integrating a GaN-based Schottky-barrier type transistor and a GaN UV photodetector on a wafer. Both individual devices show good electrical and photoresponse characteristics, and the fabricated UV PPS was successfully operated under UV irradiation conditions with a high on/off extinction ratio of as high as $10^3$. This integration technique of a single pixel sensor will be a breakthrough for the development of GaN-based optoelectronic integrated circuits.

• 한국통신학회논문지
• /
• 제41권7호
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.