• Solar Energy
• /
• v.8 no.2
• /
• pp.19-25
• /
• 1988

[ $SnO_2$ ] thin films have been deposited on the pyrex glasses and silicon wafers by CVD method. Tin oxide films had a good transmittance above 80% in the visible region and the lowest sheet resistance at $520^{\circ}C$. When the ratio of $SbCl_3$ was 2wt%. The optimum conditions were obtained at the oxidation time of 3 minutes in the case that Voc and Jsc were 0.40V and $33.5mA/cm^2$ respectively and the corresponding conversion efficiency was 6.07%.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1701-1706
• /
• 2004

FRT design aims at high-tech vehicles of high efficiency and cleanness, it must materialize the meaning and role as new added value by applying car design aesthetics of a new future-oriented concept. In addition, different from ordinary vehicle design, FRT involves invisible factors such as pleasantness, safety, accessibility, controllability, movability, conveniency, culture, identity, brand image and fashionableness. Because FRT vehicles are transportation means used by various groups of people, they must be approached with the barrier-free design concept. Therefore, in order to enhance the potential of future transportation culture emphasizing creativity based on diversity, it is important to establish core design factors that create new added values and to apply new concepts to their roles.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3686-3690
• /
• 2012

Photochemical degradation of dimethyl phthalate (DMP) in Fe(III)/tartrate/$H_2O_2$ system was investigated utilizing fluorescent lamps as the primary light source. Effects of initial pH, light source, and initial concentration of each reactant on DMP photodegradation was examined. The results show that the system was able to effectively photodegrade DMP utilizing visible light. Fluorescent lamp, halide lamp, UV lamp and sunlight could all be used as the light sources. The optimal pH ranged among 3.0-4.0 for the system. Increases of the initial concentrations of Fe(III) and $H_2O_2$ accelerated the photodegradation of DMP, whereas excessively high initial tartrate concentration resulted in the decrease of photodegradation efficiency and rate of DMP.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.371-375
• /
• 2013

To improve the utilization efficiency of solar energy, a new solar optical concentrating system composed of a parabolic reflector with a square cross-section, a hyperbolic reflector with a square cross-section and two converging convex lenses has been designed. The proposed method can simultaneously focus and shape sun light into a square pattern on the solar panel. In addition, the total reflection property of photonic crystal within the range of the visible sunlight spectrum has been analyzed. Finally, the relationship between solar concentrating multiples and the diameter of the primary mirror has been discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2002

The world at the end of the $20^{th}$ Century has become "blue" Indeed, this past decade has witnessed a "blue rush" towards the development of violet-blue-green light emitting diodes (LEDs) and laser diodes (LDs) based on wide bandgap III-Nitride semiconductors. And the hard work has culminated with, first, the demonstration of commercial high brightness blue and green LEDs and of commercial violet LDs, at the very end of this decade. Thanks to their extraordinary properties, these semiconductor materials have generated a plethora of activity in semiconductor science and technology. Novel approaches are explored daily to improve the current optoelectronics state-of-the-art. Such improvements will extend the usage and the efficiency of new light sources (e.g. white LEDs), support the rising information technology age (e.g. high density optical data storage), and enhance the environmental awareness capabilities of humans (ultraviolet and visible photon detectors and sensors). Such opportunities and many others will be reviewed in this presentation.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.461-465
• /
• 2011

An aluminum doped zinc oxide (AZO) film for front contacts of thin film solar cells, in this work, were deposited by r.f. magnetron sputtering, and then etched in diluted hydrochloric acid solution for different times. Effects of surface texturing on the electro-optical properties of AZO films were investigated. Also, to clarify the light trapping of textured AZO film, amorphous silicon thin film solar cells were fabricated on the textured AZO/glass substrate and the performance of solar cells were studied. After texturing, the spectral haze at the visible range of 400 ~750 nm increased substantially with the etching time, without a change in the resistivity. The conversion efficiency of amorphous Si solar cells with textured AZO film as a front electrode was improved by the increase of short-circuit current density ($J_{sc}$), compared to cell with flat AZO films.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.336-345
• /
• 1996

A theoretical and experimental study was conducted in order to design highly efficient solar air heaters using porous material. Radiative characteristics of glass windows and porous absorbing media were correlated through spectral transmittances measured by the UV-Visible and the FT-IR spectrometers. Using those characteristics the efficiencies of collectors were numerically calculated with the use of the two-flux radiation model. Based on the theoretical results, an experimental solar collector was designed and constructed. Experimental results under various conditions show that the daily efficiencies are over 60% in general and agree well with the theoretically calculated ones.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.727-731
• /
• 2001

Conjugated-non-conjugated alternating block copolymers containing distyrylarylene units were synthesized via Wittig reaction for chemiluminescent fluorophores. The polymers were differentiated from others by the presence of aromatic unit in the chromophoric block. When UV-VIS, photoluminescence and chemiluminescence spectra of these materials were compared with copolymers, a strong bathochromic effect was observed. A more pronounced red shift and higher chemiluminscence efficiency were observed in the polymer with anthracene ring. Sodium salicylate-catalyzed reaction of bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate with hydrogen peroxide produced a strong chemiluminescence from blue to yellow-green light emission with wavelength of 450-537 nm in the presence of the fluorophore. The chemiluminescent intensity decayed exponentially. The glow of chemiluminescence maintained more than l2 hr and was visible with the naked eye.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.27-31
• /
• 2017

AZO/Ag/AZO multi-layer films deposited on glass substrate by RF magnetron sputtering and thermal evaporator have a much better electrical properties than Al-doped ZnO thin films. The multi-layer structure consisted of three layers, AZO/Ag/AZO, the electrical and optical properties of AZO/Ag/AZO were changed mainly by thickness of Ag layers. The optimum thickness of Ag layers was determined to be $90{\AA}$ for high optical transmittance and good electrical conductivity. The Ag layers thickness $90{\AA}$ is an optical transmittance greater than 80% of visible light and the obtained multilayer thin film with the low resistivity of $8.05{\times}10-3{\Omega}cm$ and the low sheet resistance $5.331{\Omega}/sq$. Applying to TCO and Solar electrode will improve efficiency.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.252-256
• /
• 2019

Fullerene oxide[$C_{60}(O)_n$, ($n{\geq}1$)] was synthesized by dissolving fullerene[$C_{60}$] and 3-chloroperoxybenzoic acid in toluene under refluxing condition for 5 h. Hybrid fullerene oxide-silver nanoparticle composites were synthesized by dissolving fullerene oxide and silver nitrate[$AgNO_3$] in diethylene glycol under ultrasonic irradiation for 3 h. The synthesized hybrid nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, and ultraviolet-visible[UV-vis] spectroscopy. The catalytic activity for the reduction of various nitroanilines[NAs] was identified by UV-vis spectrophotometer. The efficiency of the catalytic reduction by the synthesized hybrid nanocomposites has an order of 4-NA > 2-NA > 3-NA.