• Preventive Nutrition and Food Science
• /
• v.13 no.3
• /
• pp.245-248
• /
• 2008

The effects of native sweet potato starch (NSPS) and sweet potato starch modified by acetylation (MSPS) on dynamic rheological properties of surimi sols were investigated by small-deformation oscillatory measurements. Dynamic frequency sweeps of surimi sols at $10^{\circ}C$ showed that the addition of NSPS and MSPS resulted in a reduction of storage modulus (G') and loss modulus (G"). The tan $\delta$ values (ratio of G"/ G') of all samples were in the range of $0.15{\sim}0.54$ over a wide range of frequency, indicating that all surimi sols are more elastic than viscous. The characteristic G' thermograms of surimi sols during heating from 10 to $90^{\circ}C$ were influenced by the addition of starch. The tan $\delta$ values of all samples were maintained nearly constant above $45^{\circ}C$, showing that the G' is proportional to the G" irrespective of starch effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.198-203
• /
• 2000

A highly viscous biopolymer from Bacillus coagulans CE-74 was purified and its rheological properties were studied The rheological properties of biopolymers produced by Bacillus coagulans CE-74 were studied at the temperature ranges with 20~8$0^{\circ}C$, at the concentration of 0.5~4.0%, at the pH ranges from 3 to 1 and at the shear rate fo 7.34~73.38 sec-1. The apparent viscosity of biopolymer was decreased with increasing shear rate, and thereby biopolymer showed pseudoplastic characteristics. Biopolymer solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1%, the consistency index and the flow behavior index were shown at 2.64 poise. sec11 and 0.8571, respectively. All dispersions were pseudoplastic fluids described accurately by Herschel-Bulkley model. The change of the biopolymer viscosity on pH showed the highest value at the pH 7.0 and it showed lower at acidic conditon that at alkaline condition comparatively.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.129-138
• /
• 2006

Using a strain-controlled rheometer, the steady shear flow properties of aqueous xanthan gum solutions of different concentrations were measured over a wide range of shear rates. In this article, both the shear rate and concentration dependencies of steady shear flow behavior are reported from the experimentally obtained data. The viscous behavior is quantitatively discussed using a well-known power law type flow equation with a special emphasis on its importance in industrial processing and actual usage. In addition, several inelastic-viscoplastic flow models including a yield stress parameter are employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models is also examined in detail. Finally, the elastic nature is explained with a brief comment on its practical significance. Main results obtained from this study can be summarized as follows: (1) Concentrated xanthan gum solutions exhibit a finite magnitude of yield stress. This may come from the fact that a large number of hydrogen bonds in the helix structure result in a stable configuration that can show a resistance to flow. (2) Concentrated xanthan gum solutions show a marked non-Newtonian shear-thinning behavior which is well described by a power law flow equation and may be interpreted in terms of the conformational status of the polymer molecules under the influence of shear flow. This rheological feature enhances sensory qualities in food, pharmaceutical, and cosmetic products and guarantees a high degree of mix ability, pumpability, and pourability during their processing and/or actual use. (3) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have equivalent ability to describe the steady shear flow behavior of concentrated xanthan gum solutions, whereas both the Bingham and Casson models do not give a good applicability. (4) Concentrated xanthan gum solutions exhibit a quite important elastic flow behavior which acts as a significant factor for many industrial applications such as food, pharmaceutical, and cosmetic manufacturing processes.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.441-454
• /
• 2022

This study aimed to determine the effect of enzyme, guar gum, and pressure processing on the digestibility and physicochemical properties of age-friendly liver sausages. Liver sausages were manufactured by adding proteolytic enzyme (Bromelain) and guar gum, and pressure-cooking (0.06 MPa), with the following treatments: control, without proteolytic enzyme; T1, proteolytic enzyme; T2, proteolytic enzyme and guar gum; T3, pressure-cooking; T4, proteolytic enzyme and pressure-cooking; T5, proteolytic enzyme, guar gum, and pressure-cooking. The pH was high in the enzyme- and pressure-processed groups. The pressure-processed groups had lower apparent viscosity than other cooking groups, and it decreased during enzyme treatment. Hardness was lower in the enzyme- and pressure-processed groups than in the control, and the T4 was the lowest. Digestibility was the highest in T4 at 82.58%, and there was no significant difference with that in T5. The general cooking group with enzyme and guar gum also showed higher digestibility than the control (77.50%). As a result of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme- and pressure-treated groups (T4, T5) were degraded more into low-molecular-weight peptides (≤37 kDa) than the control and other treatments. Viscoelasticity showed similar trends for viscous and elastic moduli. Similarly, combined pressure processing and enzymatic treatment decreased viscoelasticity, while guar gum increased elasticity but decreased viscosity. Therefore, the tenderized physical properties and improved digestibility by enzyme and pressurization treatment could be used to produce age-friendly spreadable liver sausages.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.216-223
• /
• 2012

Dextran was produced by $Leuconostoc$ $mesenteroides$ SM with various contents of yeast extract and its rheological properties were modulated, via an addition of hydroxypropyl methylcellulose (HPMC) of different viscosities. The conversion yield reached 90% after adding 3% yeast extract, which remained constant, thereafter. The acidity of the cultures was approximately 1.4 and 0.9% after fermentation for 24 h at 25 and $30^{\circ}C$, respectively. The total dextran content (107.3 g/kg) was the highest in the presence of the 3% yeast extract. Under the same conditions, the consistency, viscous modulus (G"), and elastic modulus (G') of the cultures were $37.6\;Pa{\cdot}s^n$, 38 Pa, and 50 Pa, respectively. The rheological properties of the culture were changed drastically by the fortification with HPMC of higher concentration and viscosity. The addition of 10% HPMC (4,000 cp) resulted in a significant increase in G" to 1,950 Pa. Furthermore, adding HPMC to a viscous culture resulted in a remarkable increase in both hardness and firmness.

• Journal of Food Hygiene and Safety
• /
• v.10 no.1
• /
• pp.33-39
• /
• 1995

The antibacterial and antifungal effect of grapefruit seed extract(GFSE) was investigated for its purpose of application to a diverse spectrum of field as sanitizers, disinfectants and preservatives. GFSE showed coparatively high content of such flavoniods as naringin and hesperidin and ascorbic acid. GFSE containing a low level of organic acids is a heavy viscous and water-soluble liquid. As a result of the antimicrobial test of GFSE, Bacillus subtilis and Aspergillus oryzae did not survive at detectable levels when treated with more than 100 ppm of GFSE. The minimum inhibitory concentrations of GFSE for a wide variety of pathogenic and putrefactive bacteria, fungi and yeasts were 100 ppm and 250 ppm, respectively. In the comparable electron micrograph of microbial cells treated with GFSE or not, we could conclude that GFSE destroy microorganisms by disrupting the functions of the cell wall membrane and microbial spores.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.475-480
• /
• 1989

The extracellular polysaccharide was isolated from the culture of Ps. delafieldii and its rheological property was evaluated. The aqueous solution was extremely viscous and shows pseudoplastic behaviour. The flow behaviour index and apparent viscosity of 1 ％solution were 0.09 and 1169 mPa·s. The solution was stable over pH change but did not have thermal stability. The activation energy of flow of 1 ％ solution was 4.44 kcal/mole. The concentration dependency could be expressed double logarithmically.

• Preventive Nutrition and Food Science
• /
• v.9 no.4
• /
• pp.295-299
• /
• 2004

Alpha-tocopherol was thermally oxidized and degraded at high temperatures and the resulting products were chromatographically separated and identified by LC-MS. Alpha-tocopherol dissolved in glycerol was heated at 200^{\circ}C for 30 min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase $\mu$-Bondapak $C_{18}-column$ with two kinds of elution solvents: a mixture of acetonitrile and methanol (3:2), and of acetonitrile, methanol, 2-propanol, chloroform and methylene chloride (3:2:5:0.5:0.5) in a gradient mode. The isolated thermal. products of alpha-tocopherol were more viscous than alpha-tocopherol, and dark brown in color. Major thermal degradation products of alpha-tocopherol were identified by LC-MS, and the structures of thermal products were proposed. Alpha-tocopherol and its thermal degradation products were degraded into fragments, mainly at the non-aromatic parts. The degradation products of alpha-tocopherol. were combined with oxidized product (tocopherylquinone) to make thermal. products through dimerization.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.303-308
• /
• 1989

A bacterium synthesizing extracellular polysaccharide was isolated from soil and identified as Enterobacter agglomerans. The polysaccharide was found to be glucan polymer containing glucose and galactose in a molar ratio of 1 : 1.1. The aqueous solution was very viscous. The viscosity of 1% solution was 264 mPa.s. at $42\;sec^{-1}$ and yield stress was 4.89 Pa. The polysaccharide solution did not have thermal stability but pH and salt stability.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.722-727
• /
• 2007

Mucilage containing ${\gamma}-polyglutamic$ acid (PGA) was efficiently generated by the solid-state fermentation (SSF) of soybean grit by Bacillus firmus NA-1. B. firmus NA-1 was shown to be a glutamate-dependent strain for PGA production. The SSF of soybean grit was optimized in order to produce mucilage with a fortification of 5% glutamate, resulting in higher levels of mucilage production (6.14%) and a higher consistency index ($1.1\;Pa\;sec^n$). The sticky mucilage was comprised of 38% PGA, 7% levan, and some biopolymers. With regard to the viscoelastic properties of the mucilage solution, the viscous modulus (G") obtained from soybean grit fortified with 5% glutamate was approximately 64 times higher titan that of the mucilage solution obtained without glutamate. Although the addition of glutamate in the SSF of soybean grit influenced the rate of PGA production, the molecular weight of PGA remained unaltered, and was detected in a range between 1,400-1,440 kDa.