• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.183-195
• /
• 2007

이차원 범프 유동에 대한 다양한 예조건화 행렬의 수렴 특성을 살펴 Choi 와 Merkle 의 예조건화 행렬을 선택하여, 압축성 및 예조건화 Roe의 Riemann 해법의 수치 소산항을 수학적으로 비교하였다. 이 결과 코드의 구조는 동일하게 유지한 채, 고유치의 작은 수정만으로 압축성 해법을 예조건화 해법으로 이전할 수 있는 방법을 알 수 있었다. 아울러 점성 유동 영역에서의 안정성 및 정확성을 향상시키기 위하여 von Neumann 안정 조건 및 점성 자코비안을 고려하였으며, 개발된 코드는 표준 검증 문제에 적용하여 검증을 수행하였다.

• 에너지공학
• /
• 제26권1호
• /
• pp.9-22
• /
• 2017

A combined thermal and flow analysis was carried out to study the behavior and performance of a small, commercial LTD (Low-Temperature-Differential) heat engine. Laminar-flow solutions for annulus and channel flows were employed to estimate the viscous drags on the piston and the displacer and the pressure difference across the displacer. Temperature correction factors were introduced to account for the departure from the ideal heat transfer processes. The analysis results indicate that the work required to overcome the viscous drags on engine moving parts and to move the displacer is much smaller than the moving-boundary work produced by the power piston for temperature differentials in the neighborhood of $20^{\circ}C$ and engine speeds below 10 RPS. A comparison with experimental data reveals large degradations from the ideal heat transfer processes. Thus, heat-transfer devices inside the displacer cylinder are recommended.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.240-252
• /
• 1998

The purpose of this study is to develop a method for predicting the aerodynamic performance of the low speed airfoils in the 2-dimensional, steady and viscous flow. For this study, the airfoil geometry is specified by adopting the longest chord line system and by considering local surface curvature. In case of the inviscid incompressible flow, the analysis is accomplished by the linearly varying strength vortex panel method and the Karman-Tsien correction law is applied for the inviscid compressible flow analysis. The Goradia integral method is adopted for the boundary layer analysis of the laminar and turbulent flows. Viscous and inviscid solutions are converged by the Lockheed iterative calculating method using the equivalent airfoil geometry. The analysis of the separated flow is performed using the Dvorak and Maskew's method as the basic method. The wake effect is also considered by expressing its geometry using the formula of Summey and Smith when no separation occurs. The computational efficiency is verified by comparing the computational results with experimental data and by the shorter execution time.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.229-240
• /
• 1991

본 연구에서 사용한 이론과 제시된 방법의 타당성을 검토하기 위하여 익열 간 극이 무한대인 단일 익형 주위의 유동장을, 최근에 개발된 계산방법인 Lambda방법을 사용한 Dadone의 해석결과와 비교하였고, 범용의 압축기 익형인 NACA65게열 익열 유동 에 대한 Herrig의 실험값, 그리고 미분해석에 의한 점성-비점성 상호작용 방법을 사용 한 Hansen의 계산값고, 이들 조건과 동일한 상태에서 본 연구에서 제시한 방법으로 계 산한 결과와 만족할 만한 일치를 얻었다.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.1-10
• /
• 1997

본 연구는 실제 선박 주위의 점성 유동에 대해 RANS방정식을 사용하여 해석함으로써 그 계산 방법의 타당성 및 선형 설계에의 유효성을 입증하고, 모형선 크기에 따른 점성 유동의 영향, 즉 척도효과에 대한 기초 연구를 목적으로 하였다. 높은 레이놀즈수에서의 난류유동을 계산하기 위해 k-${\varepsilon}$ 난류모형을 채용하였으며, 물체 근처에서는 벽법칙을 사용하였다. 선체의 3차원 형상을 효과적으로 처리하기 위해 물체적합좌표계를 이용하여 실제영역에서 유도된 지배방정식을 계산영역으로 변환시켰으며, 유한체적법을 사용하여 이산화시켰다. 압력 계산은 SIMPlE법을 사용하였으며, 이산화된 식들은 TDMA를 이용한 선순법으로 해를 구하였다. 실제 계산대상 선박은 4410 TEU급 콘테이너 운반선과 50,000 DWT급 살물 운반선으로 모형선 크기와 실선 크기에 대해 점성유동을 해석하여 비교하였으며, 모형선에 대해서 저항시험, 프로펠러 면에서의 반류분포 조사 시험, 그리고 한계유선 조사시험을 수행하여 계산결과와 비교 검토하였다. 계산결과는 선미 유동장에서의 평균속도와 압력 분포에 있어서 선미 형상에 따른 효과와 척도효과를 잘 묘사하고 있다. 특히, 계산된 프로펠러 변에서의 반류분포와 선체 표변에서의 한계유선 분포는 실험과 정성적으로 잘 일치하고 있으며, 점성저항 추정에 있어서는 실험 값과 ${\pm}5%$ 이내로 예측하고 있음을 보여 주고 있어 선형 개발의 설계 도구로 활용될 수 있음을 알 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2292-2314
• /
• 2006

Efficient numerical method is developed for the prediction of aerodynamic noise generation and propagation in low Mach number flows such as aeolian tone noise. The proposed numerical method is based on acoustic/viscous splitting techniques of which acoustic solvers use simplified linearised Euler equations, full linearised Euler equations and nonlinear perturbation equations as acoustic governing equations. All of acoustic equations are forced with immersed surface dipole model which is developed for the efficient computation of aerodynamic noise generation and propagation in low Mach number flows in which dipole source, originating from unsteady pressure fluctuation on a solid surface, is known to be more efficient than quadrupole sources. Multi-scale overset grid technique is also utilized to resolve the complex geometries. Initially, aeolian tone from single cylinder is considered to examine the effects that the immersed surface dipole models combined with the different acoustic governing equations have on the overall accuracy of the method. Then, the current numerical method is applied to the simulation of the aeolian tones from twin cylinders aligned perpendicularly to the mean flow and separated 3 diameters between their centers. In this configuration, symmetric vortices are shed from twin cylinders, which leads to the anti-phase of the lift dipoles and the in-phase of the drag dipoles. Due to these phase differences, the directivity of the fluctuating pressure from the lift dipoles shows the comparable magnitude with that from the drag dipoles at 10 diameters apart from the origin. However, the directivity at 100 diameters shows that the lift-dipole originated noise has larger magnitude than, but still comparable to, that of the drag-dipole one. Comparison of the numerical results with and without mean flow effects on the acoustic wave emphasizes the effects of the sheared background flows around the cylinders on the propagating acoustic waves, which is not generally considered by the classic acoustic analogy methods. Through the comparison of the results using the immersed surface dipole models with those using point sources, it is demonstrated that the current methods can allow for the complex interactions between the acoustic wave and the solid wall and the effects of the mean flow on the acoustic waves.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.247-253
• /
• 2012

Dam-break flows, a type of very shallow gravity-driven flow, are substantially influenced by resistance forces due to viscous friction and turbulence. Assuming turbulent flow, the main focus of this study is to validate the increase of drag forces caused by surface roughness and especially turbulence intensity. A Reynolds Averaged Navier-Stokes(RANS) approach with the standard k-${\varepsilon}$ turbulence model is used for this study, where the free surface motion is captured by using a volume of fluid(VOF) method. Surface roughness effects are considered through the law of the wall modified for roughness, while the initial turbulence intensity which determines the lowest level of turbulence in the flow domain of interest is used for the variation of turbulence intensity. It has been found that the numerical results at higher turbulence intensities show a reasonably good agreement with the physical aspects shown by two different dam-break experiments without and with the impact of water.

• International Journal of Fluid Machinery and Systems
• /
• 제6권2호
• /
• pp.94-104
• /
• 2013

This paper describes the design to increase the blade loading factor of a low speed axial flow fan from normal 0.42 to highly loaded 0.55. A three-dimensional viscous solver is used to model the flows in the highly-loaded and normal loaded stages over its operation range. At the design point operation the static pressure rise can be increased by 20 percent with a deficit of efficiency by 0.3 percent. In the highly loaded fan stage, the rotor hub flow stalls, and separation vortex extends over the rotor hub region. The backflow, which occurs along the stator hub-suction surface, changes the exit flow from the prescribed axial direction. Results in this paper confirm that the limitation of the two dimensional diffusion does not affect primarily on the fan's performance. Highly loaded fan may have actually better performance than its two dimensional design. Three dimensional designing approaches may lead to better highly loaded fan with controlled rotor hub stall.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.16-28
• /
• 2000

The steady rotating flows in eccentric annulus has been studied by a numerical method based on the spectral collocation method. The inner cylinder has a constant angular velocity while the outer on e is stationary. Flow between eccentric cylinders is of considerable technical importance as it occurs in journal bearings. In the present work, the governing equations for laminar flow are expressed as Navier-Stokes equations, including the non-linear convection terms. The solutions were utilized i, estimate the effects of the nonlinear terms on the load acting on the rotating cylinder. Based on the half and the full Sommerfeld methods, the load on the rotating cylinder is evaluated with eccentricity, by integrating the pressure and skin friction around the cylinder. The attitude angle and Sommerfeld reciprocal are calculated from the load. Also, the torque on the rotating inner cylinder was calculated. considering the skin friction. The attitude angle and Sommerfeld reciprocal are decreased with eccentricity. Viscous damping coefficient due to the skin friction becomes larger with decreasing the annular space. It is found the non-linear effects of the convection terms on the flow and the load are important. especially on the attitude angle, for relatively wide annular configurations however, the effects on those are minor for very narrow annular ones.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.72-78
• /
• 2014

A hybrid particle-mesh method as the combination between the Vortex-In-Cell (VIC) method and penalization method has been achieved in recent years. The VIC method, which is based on the vorticity-velocity formulation, offers particle-mesh algorithms to numerically simulate flows past a solid body. The penalization method is used to enforce boundary conditions at a body surface with a decoupling between body boundaries and computational grids. The main advantage of the hybrid particle-mesh method is an efficient implementation for solid boundaries of arbitrary complexity on Cartesian grids. However, a numerical simulation of flows in large domains is still not too easy. In this study, a multi-domain approach is thus proposed to further reduce computation cost and easily implement it. We validate the implementation by numerical simulations of an incompressible viscous flow around an impulsively started circular cylinder.