• Composites Research
• /
• 제16권5호
• /
• pp.39-44
• /
• 2003

복합재료에 삽입된 점탄성 재료는 복합재구조물의 감쇠물성을 크게 증가시킨다. 일반적으로 점탄성 재료는 등방성이므로 모든 방향의 감쇠물성이 동일하다. 최근 재료의 방향에 따라 감쇠물성이 변하는 이방성 감쇠재료의 개발이 요구되고 있다. 이방성 감쇠재료는 점탄성 재료 내부에 얇은 섬유를 삽입하여 제작한다. 삽입된 섬유는 댐핑재료의 강성에 큰 영향을 주며 강성은 고전 적층판 이론을 따르게 된다. 본 논문에서는 Ni와 Adams의 이론을 이용하여 손실계수를 평가하였다. 그리고 방향성 있는 감쇠재료의 영향을 평가하기 위해 저속충격 거동해석을 수행하였다. 해석결과로부터 방향성 있는 감쇠재료는 복합적층판의 진동 및 감쇠특성에 큰 영향을 줌을 보였다

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.286-289
• /
• 2008

Damping materials are widely used to reduce vibration or noise generation of structures. To understand their damping capability and for use in numerical simulations, their viscoelastic properties should be measured in the frequency range of interest. In this study, experimental setup is proposed to measure materials properties of very compliant polymer materials. The polymer materials used in this study are difficult to form into rod shapes, and typical resonance methods are not applicable. In the proposed measurement setup, the damping materials were modeled as a simple viscoelastic support at one end of the beam. Their properties were measured through analysis of their effects on the wave propagation characteristics of the beam structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.35-41
• /
• 1997

Viscoelastic materials shows the characteristics of elasticity and viscosity. Unlike metals which show negligible damping value, the damping characteristics of viscoelastic materials like rubber mounts is very important in the analysis of the dynamic system. So there has been a great interest in measuring the damping characteristics of viscoelastic materials. There are two kinds of methods which the damping characteristics can be measured. One is the resonant method where loss factor can be measured only in the resonant frequency. The other is the nonresonant method which is characterized by the impedance method are introduced. The impedance test results, the loss factor by the impedance method are compared to the results of the resonant method and recommendations in the experimental setup are suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1023-1026
• /
• 2007

Optimal damping layout of the constrained viscoelastic damping layer on beam is identified with temperatures by using a gradient-based numerical search algorithm. An optimal design problem is defined in order to determine the constrained damping layer configuration. A finite element formulation is introduced to model the constrained damping layer beam. The four-parameter fractional derivative model and the Arrhenius shift factor are used to describe dynamic characteristics of viscoelastic material with respect to frequency and temperature. Frequency-dependent complex-valued eigenvalue problems are solved by using a simple resubstitution algorithm in order to obtain the loss factor of each mode and responses of the structure. The results of the numerical example show that the proposed method can reduce frequency responses of beam at peaks only by reconfiguring the layout of constrained damping layer within a limited weight constraint.

• 전산구조공학
• /
• 제7권1호
• /
• pp.99-107
• /
• 1994

감쇠재료인 점탄성재료는 여러 산업현장에서 발생하는 소음 및 진동문제를 해결하기 위하여 널리 쓰이고 있다. 기존의 진동감쇠 제어기술을 이용하여 이러한 문제를 성공적으로 해결하기 위해서는 먼저 제어하고자 하는 구조물에 적용될 점탄성재료의 진동감쇠 특성이 명확히 규명되어야 한다. 따라서 본 연구에서는 1)우리의 일반적인 실험실 환경에서 모우드해석법을 통해 점탄성재료의 진동감쇠특성을 측정할 수 있는 실험이론과 기법을 정립하고 2)제한된 환경(온도 및 주파수)에서 얻어진 실험 데이타를 이용하여 reduced-frequenct-nomogram(RFN)을 그릴 수 있는 전산프로그램을 개발하였으며 또한 RFN으로부터 확보한 점탄성재료의 진동감쇠특성을 이용하여 감쇠처리된 구조물의 진동해석을 수행하였다.

• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.938-946
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximizeloss factor using a numerical search method. The fractional derivative model can describe damping characteristics of viscoelastic damping materials accurately, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kelvin[RUK] equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are identified with ambient temperatures and thickness ratios of beam and damping layer by using a finite-difference-based steepest descent method.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.67-72
• /
• 2011

Offshore structures, such as a platform, a buoy, or a floating vessel, are exposed to several dynamic loads, and viscoelastic damping material is used to reduce the vibration of offshore structures. It is important to know the properties of viscoelastic materials because loss factor and Young's modulus of the viscoelastic damping material are dependent on frequency and temperature. In this study, an advanced technique for obtaining accurate loss factor and Young's modulus of the viscoelastic damping material is introduced based on a multi degree of freedom curve-fitting method and the RKU (Ross-Kerwin-Ungar) equations. The technique is based on a modified experimental procedure from ASTM E 756-04. Loss factor and Young's modulus of the viscoelastic damping material are measured for different temperatures by performing the test in a temperature-controlled vibration measurement room where temperature varies from 5 to 45 degrees Celsius.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.189-194
• /
• 2004

The viscoelastic layer material is widely used to control the noise and vibration characteristics of the panel structure. This paper describes the design technology of the effective vibration damping treatment using the concept of the equivalent parameter of viscoelastic layer materials. Applying the equivalent parameter concepts based on theories of shell, it is possible to simulate the finite element analysis of damping layer panel treatments on the vibration characteristics of the structure. And it is achieved the reduced computational cost and the optimal design of topological distribution for the reduction of vibration effect.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.224-227
• /
• 2000

Modal damping characteristics of the flexural vibration of a sandwich beam with paaially inserted viscoelastic layer have been quantitatively studied using the finite element analysis in combination with an experiment. Antisymmetric mode shapes of the flexural vibration were visualized by the holographic interferometry and agreed with those calculated by the finite element simulation. Effects of the length and thickness of partial viscoelastic layers on the system loss factor($\mu$) and resonant frequency($\omega$) were considerably latge at both symmetric and antisymmetric modes of the sandwich beam.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.22-32
• /
• 1998

Many of steel structures having little internal damping consist of stiffened plates. In case that viscoelastic materials are adhered to the stiffened plates for the reduction of structure-borne noise, their effects are varied by the adhered position and dynamic characteristics of the structures as well as their material properties and adhered amount. In this paper, sound reduction effects of viscoelastic materials partially adhered to the different positions of a stiffened steel plate have been investigated by the measurement of vibratory velocity and sound intensity. The results show that optimal adherent positions of viscoelastic materials to reduce sound radiation power are the loop areas of modes.