• Title/Summary/Keyword: vinyl chloride

검색결과 271건 처리시간 0.023초

화재 위험성이 높은 노출배관 사용에 관한 연구 (Study on Exposed Piping with High Risk of Fire)

  • 김엽래;백동현
    • 한국화재소방학회논문지
    • /
    • 제29권4호
    • /
    • pp.61-66
    • /
    • 2015
  • 건축물 내에 노출배관의 자재에 대한 별도의 규정을 두지 않음에 따라 내부식성, 내약품성 측면에서 우수하다고 알려진 Poly Vinyl Chloride (PVC)관을 많이 사용하고 있다. 그러나 화재시 유독가스의 발생과 화재의 확산 방지에 취약하다는 우려의 시각이 있다. 노출배관은 불연재를 사용하여야 화재시 유독가스의 확산을 방지하면서 인명이나 재산상의 피해를 최소화할 수 있다. 초대형 건축물이 많이 건설되고 있는 시기에 화재시 피해의 심각성이 매우 우려된다. 건축물의 화재안전기준을 강화하고, 높아진 안전의식을 수용하여야 선진국으로의 진입에 한걸음 더 나아갈 수 있다. 노출배관에 사용되는 자재를 조사하고, 선진국의 기준에 대해 분석하여 효율성을 연구함으로서 국민안전을 증대시킬 수 있다. 국내 각 지역별 건축물의 노출배관에 대해 현장의 실태를 조사하여 대안을 모색하고자 한다. 건축물 안전과 거주자의 안전 확보 및 국내 외 노출배관의 불연재 사용에 대한 실태를 바탕으로 관련법규를 개선함으로 국민안전에 대하여 그 효율성을 제고한다.

고분자 첨가에 의한 콜타르 핏치의 결정성 및 탄소섬유 물성 변화 (Modification of Coal-Tar-Pitch and Carbon Fiber Properties by Polymer Additives)

  • 김정담;윤재민;임연수;김명수
    • 한국재료학회지
    • /
    • 제26권4호
    • /
    • pp.173-181
    • /
    • 2016
  • In order to use coal tar pitch (CTP) as a raw material for carbon fibers, it should have suitable properties such as a narrow range of softening point, suitable viscosity and uniform optical properties. In this study, raw CTP was modified by heat treatment with three types of polymer additives (PS, PET, and PVC) to make a spinnable pitch for carbon fibers. The yield, softening point, C/H ratio, insoluble yield, and meso-phase content of various modified CTPs with polymer additives were analyzed by changing the type of polymer additive and the heat treatment temperature. The purpose of this study was to compare the properties of CTPs modified by polymer addition with those of a commercial CTP. After the pitch spinning, the obtained green fibers were stabilized and carbonized. The properties of the respective fibers were analyzed to compare their uniformity, diameter change, and mechanical properties. Among three polymer additives, PS220 and PET261 pitches were found to be spinnable, but the carbon fibers from PET261 showed mechanical properties comparable with those of a commercial CTP produced by an air-blowing method (OCI284). The CTPs modified with polymer additive had higher ${\beta}$-resin fractions than the CTP with only thermal treatment indicating a beneficial effect of carbon fiber application.

한지 소재 내장재의 친환경적 요소 분석 연구 (Study on the Environmental Factor Analysis of Interior Material using Hanji)

  • 김지수;이유라;임현아
    • 한국가구학회지
    • /
    • 제22권1호
    • /
    • pp.63-71
    • /
    • 2011
  • Hanji has known for its high qualities for more than thousand years. Hanji is stronger, and has better durability, air permeability, flexibility, thermal insulation, soundproofs and UV absorbability. Therefore, developing industrial interior finishing materials using Hanji is replaced with the PVC (Poly-Vinyl Chloride) materials instead, it will be a new environment-friendly material and positively represents Korean brand marketing. The industrial inter-construction material is discomposed by heat or light because of material characteristics. As a result, it emits a lot of noxious substances. Hanji is essentially a neutral paper since it does not rely on any acidic chemicals of artificial bleaching methods. Hanji is also known as the living paper because of its close relation to nature. Therefore, I would like to suggest that Hanji made from alternative material as a chicken fiber. It will be a non-polluting interior finishing materials by making use of Hanji to a taste of Korean culture in the green industry around the world. Rather than PVC used commonly in construction material, kitchen and office furniture, interior materials in the subway, trains, or other vessels, credit cards, and ID cards, I created an interior construction material by using patented Hanji. This will be increased the value of usefulness in the environment-friendly green industry instead of PVC.

  • PDF

이온교환체 전극을 이용한 베라파밀 정량 (Determination of Verapamil with ISE based on Ion Exchanger)

  • 이은엽;김동오;장승현;허문회;안문규
    • 약학회지
    • /
    • 제40권2호
    • /
    • pp.135-140
    • /
    • 1996
  • Ion-selective poly(vinyl chloride)(PVC) membrane electrodes for the determination of the calcium antagonist verapamil and its pharmaceutical preparations were described. Verapam il-superchrome garnet Y(SGY), lumogallion(LG), acid red 97(AR97), Dragendorff(DD) and Meyer reagent ion pairs were inverstigated as an electroactive compound for membrane electrode. Stable potentiometric response was obtained with azo dye at pH 6.5-4.0 and with DD, and Meyer reagent at pH 6.5-3.0. The best plasticizer was 49w/w% 2-nitrophenyl octyl ether for azo dye, and 65.3w/w% tri(n-butyl) citrate for DD and Meyer reagent. Potentiometric response slopes of optimized membrane electrodes based on SGY, LG, AR97, DD, and Meyer complex for verapamil were 52.49, 54.88, 50.81, 54.13 and 49.31 mV/dec., respectively. Lower limits of linear range were $1.0{\times}10^6M$ for SGY, LG, and AR97, while those for DD and Meyer reagent were $4{\times}10^{-6}M$. Detection limits for all these electrodes were $1{\times}10^{-5}M,\;4{\times}10^{-6}M,\;1.8{\times}10^{-6}M,\;8{\times}10^{-7}M,\;and\;1{\times}10^{-6}M$ with relative standard deviation of 2.56, 3.6, 3.96, 2.56, 3.20%, respectively.

  • PDF

Simultaneous Determination of Plasticizers in Food Simulants Using GC/MS

  • Park, Na-Young;Yoon, Hae-Jung;Kwak, In-Shin;Jeon, Dae-Hoon;Choi, Hyun-Chul;Eum, Mi-Ok;Kim, Hyung-Il;Sung, Jun-Hyun;Kim, So-Hee;Lee, Young-Ja
    • 한국포장학회지
    • /
    • 제15권3호
    • /
    • pp.93-98
    • /
    • 2009
  • Migration levels of plasticizers, di-n-butyl phthalate (DBP), benzyl-butyl phthalate (BBP), di-n-octyl phthalate(DNOP), di-iso-decyl phthalate (DIDP) and di-iso-nonyl phthalate (DINP), di-(2-ethylhexyl) adipate (DEHA), from 46 poly(vinyl chloride) (PVC) wrap films and 54 PVC gaskets into food simulants were determined using gas chromatography/mass spectrometry (GC/MS). The method was validated with limit of detection (LOD) of $0.01{\sim}0.02\;{\mu}g/mL$ for DBP, BBP, DNOP and DEHA, and $2\;{\mu}g/mL$ for DIDP and DINP. The linearity were found to be > 0.99 for all the compounds in concentration range of $0.1{\sim}81.4\;{\mu}g/mL$, and overall recoveries were ranged from 90.4 ~ 99.6%. DBP, BBP, DNOP, DEHA, DIDP and DINP were not detected in food simulants, except 1 wrap sample from which 0.28 and $0.99\;{\mu}g/mL$ of DEHA were detected respectively when tested with 20% ethanol and n-heptane as food simulants. These values were below the regulatory limitation in European Union (EU).

  • PDF

철-디피리딜-메페남산 삼원착물을 이용한 메페남산의 정량 (Determination of Mefenamic Acid with Fe(II)-Dipyridyl-Mefenamic Acid Ternary Complex as Ion-exchagner)

  • 남수자;문현숙;이미나;정문모;허문희;안문규
    • 분석과학
    • /
    • 제14권1호
    • /
    • pp.59-63
    • /
    • 2001
  • 철-디피리딜-메페남산 삼원착물을 이온교환체로, NPOE(o-nitrophenyl octyl ether)를 가소게, PVC[poly(vinyl chloride)]를 지지체로 사용한 메페남산 이온선택성막 전극을 제작하였다. 디피리딜 화합물은 2,2'-디피리딜, 4,4'-디피리딜 그리고 4,4'-디페닐-2,2'-디피리딜을 이용하였다. 이들 막전극은 pH 8.9의 붕산완충액 중에서 $10^{-5}{\sim}10^{-3}mol/L$ 농도의 메페남산에 대하여 감응전위가 -55.98, -49.47 그리고 -59.35mV/decade를 각각 나타내는 직선성이었다. 방향족 및 지방족 카복실산염의 존재는 전극의 감응에 지장을 주지 않았다.

  • PDF

An Automated Water Nitrate Monitoring System based on Ion-Selective Electrodes

  • Cho, Woo Jae;Kim, Dong-Wook;Jung, Dae Hyun;Cho, Sang Sun;Kim, Hak-Jin
    • Journal of Biosystems Engineering
    • /
    • 제41권2호
    • /
    • pp.75-84
    • /
    • 2016
  • Purpose: In-situ water quality monitoring based on ion-selective electrodes (ISEs) is a promising technique because ISEs can be used directly in the medium to be tested, have a compact size, and are inexpensive. However, signal drift can be a major concern with on-line management systems because continuous immersion of the ISEs in water causes electrode degradation, affecting the stability, repeatability, and selectivity over time. In this study, a computer-based nitrate monitoring system including automatic electrode rinsing and calibration was developed to measure the nitrate concentration in water samples in real-time. Methods: The capabilities of two different types of poly(vinyl chloride) membrane-based ISEs, an electrode with a liquid filling and a carbon paste-based solid state electrode, were used in the monitoring system and evaluated on their sensitivities, selectivities, and durabilities. A feasibility test for the continuous detection of nitrate ions in water using the developed system was conducted using water samples obtained from various water sources. Results: Both prepared ISEs were capable of detecting low concentrations of nitrate in solution, i.e., 0.7 mg/L $NO_3-N$. Furthermore, the electrodes have the same order of selectivity for nitrate: $NO_3{^-}{\gg}HCO_3{^-}$ > $Cl^-$ > $H_2PO_4{^-}$ > $SO{_4}^{2-}$, and maintain their sensitivity by > 40 mV/decade over a period of 90 days. Conclusions: The use of an automated ISE-based nitrate measurement system that includes automatic electrode rinsing and two-point normalization proved to be feasible in measuring $NO_3-N$ in water samples obtained from different water sources. A one-to-one relationship between the levels of $NO_3-N$ measured with the ISEs and standard analytical instruments was obtained.

혼합조건에서의 CAH 화합물 분해 특성에 관한 연구 (CAH degradation characteristics under mixed conditions)

  • 김종호;배우근;심호재;신언빈
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
    • /
    • pp.214-217
    • /
    • 2001
  • 자연계에서는 오염물질이 단일물질로 존재하기보다는 혼합물로 존재하는 것이 대부분이다. 본 연구에서는 지하수 오염물질 chlorinated aliphatic hydrocarbon(CAH)들 중 trichloroethylene(TCE), vinyl chloride(VC)에 대해서 Fe$^{\circ}$와 함께 미생물, 활성탄을 이용하여 단일물질 및 혼합물질상태에서 그 분해특성을 살펴보았다. 실험은 120$m\ell$ serum bottle을 이용하여 단일물질 및 혼합물질상태에서 그 분해특성을 살펴보았다. 실험은 120$m\ell$ serum bottle을 이용하였고 headspace 50${\mu}\ell$를 GC에 주입하여 각 오염물질 농도를 분석하였으며, Fe$^{\circ}$, Fe$^{\circ}$+ cell, Fe$^{\circ}$+ 활성탄 3가지 조건에서 TCE (25${\mu}\ell$)가 단일화합물 또는 VC(10$\mu\textrm{m}$)와 혼합화학물로 존재시 분해특성을 조사하였다. 단일화합물로 존재시 2시간후 TCE농도 측정 결과 Fe$^{\circ}$만을 이용하였을 때보다 활성탄, Cell을 함께 이용하였을 경우 그 분해율이 각각 1.6배, 1.8배 높게 나타났다. 그러나, VC와 혼화합물로 존재시 TCE 분해율은 단일 화합물로 존재시와 비교 Fe$^{\circ}$, Fe$^{\circ}$+ 활성탄, Fe$^{\circ}$+ cell 조건에서 각각 63%, 28%, 5%로 나타났다. VC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TCE분해에 저해작용을 미치는 것으로 나타났다.

  • PDF

Zn2+ PVC-based Membrane Sensor Based on 3-[(2-Furylmethylene)amino]-2-thioxo-1,3-thiazolidin-4-one

  • Ganjali, Mohammad Reza;Zamani, Hassan Ali;Norouzi, Parviz;Adib, Mehdi;Rezapour, Morteza;Aceedy, Mohammad
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권4호
    • /
    • pp.579-584
    • /
    • 2005
  • The 3-[(2-furylmethylene)amino]-2-thioxo-1,3-thiazolidin-4-one (FTT) was used as an excellent ionophore in construction of a $Zn^{2+}$ PVC-based membrane sensor. The best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 62% nitrobenzen (NB), 3% FTT and 5% sodium tetraphenyl borate (TBP). This membrane sensor shows very good selectivity and sensitivity towards $Zn^{2+}$ over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The membrane sensor revealed a great enhancement in selectivity coefficients for $Zn^{2+}$ ions, in comparison to the previously reported $Zn^{2+}$ membrane sensors. Theoretical studies also showed the selective interaction of TFF and $Zn^{2+}$ ions. The proposed membrane sensor exhibits a Nernstian behavior (with slope of 29.3 ${\pm}$ 0.3 mV per decade) over a wide concentration range (1.0 ${\times}$ $10^{-6}$-1.0 ${\times}$ $10^{-2}$) with a detection limit of 8.5 ${\times}$ $10^{-7}$ M (52 ng mL$^{-1}$). It shows relatively fast response time, in the whole concentration range ($\lt$ 20 s), and can be used for at least 10 weeks in a pH range of 3.0-7.0. The proposed membrane sensor was successfully used in direct determination of $Zn^{2+}$ ions in wastewater of industrial zinc electroplating companies, and also as an indicator electrode in titration with EDTA.

유해화학물질 배출량 변화에 관한 연구: 배출저감계획서 작성 대상물질 중심으로 (A Study on the Emission Changes in Reduction Chemical Substances in Korea)

  • 임지영;이명지;김현지;류지성;윤대식;장용철;이청수
    • 한국환경보건학회지
    • /
    • 제46권2호
    • /
    • pp.159-169
    • /
    • 2020
  • Objectives: The purpose of this study was to investigate changes among the nine kinds of reduction chemical substances in Korea over the period of 2008-2017. We will define basic data for improving the management methods for reducing chemical substances. Methods: A survey of hazardous pollutant emissions for 2008-2017 was conducted through the pollutant Release and Transfer Register homepage. Nine kinds of designated reduction chemical substances (Benzene, Vinyl chloride, Trichloro ethylene, 1,3-butadiene, Dichloro methane, Tetrachloro ethylene, N,N-dimethylformamide, Acrylo nitrile, and Chloroform) provided the study subjects. The emission of hazardous chemicals and health effects used the National Health Statistics and Integrated Chemicals Information System (ICIS) as a reference. Results: Hazardous pollutant emissions increased by 1.2 times over the past decade, and nine types of reduction chemical substances increased by 1.6 times. By region, the emissions of reduction chemical substances over the last 10 years were in the order of Chungbuk, Gyeonggi, and Gyeongbuk. Emissions of Dichloro methane was the highest in Chungbuk and Gyeongbuk. N,N-dimethylformamide was the highest in Gyeonggi. Carcinogen pollutant emissions showed a tendency to increase continuously. In addition, group 1 carcinogen emissions showed a tendency to decrease. Conclusion: In the last decade, the amount of hazardous chemical emissions has been continuously increasing. Hazardous chemical emissions require facility improvement for continuous emissions reduction. More research on reduction of emissions is needed.