• Journal of Information Display
• /
• v.1 no.1
• /
• pp.3-8
• /
• 2000

We have developed a high performance vertical alignment TFT-LCD (Thin Film Transistor Liquid Crystal Display), that shows a high light transmittance, and wide viewing angle characteristics with an unusually high contrast ratio. In order to optimize the electro-optical properties we have studied the effect of cell parameters, multi-domain structure and retardation film compensation. With the optimized cell parameters and process conditions, we have achieved a 24" wide UXGA TFTLCD monitor (16:10 aspect ratio 1920X1200) showing a contrast ratio of over 500:1, panel transmittance near 4.5%, response time near 25 ms, and viewing angle higher than 80 degree in all directions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.664-667
• /
• 2003

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more advantageous.$^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, a newly designed optical film was applied and the truly wide view angle of a S-IPS TW(True Wide)-IPS) was achieved. Our newly developed 30-inch TFT-LCD panel reveals TW-IPS that is optimized for TV application

• Journal of the Korean Home Economics Association
• /
• v.45 no.4
• /
• pp.29-42
• /
• 2007

The purpose of this study is to investigate the leisure and social support types which affect elderly depression. The study sample comprised 275 cases, and the analysis was performed by t-test, ANOVA, multiple regression and stepwise regression on SPSS ver. 10.0. The following three principle results were obtained: First, the types of leisure and social support differed according to domographic profiles. Second, among 6 sub-factors of leisure type, sports and viewing impressions activities contributed positively to elderly depression, as did emotional and appraisement supports among 4 sub-factors of social support. Third, stepwise regression analysis, conducted to determine the effect weights of factors of leisure types and social supports, showed that emotional support, social relationships activity, and viewing impressions activity strongly affected elderly depression in the order listed. Based of these results, the study suggested methods for developing an active leisure activities program which is necessary to minimize elderly depression.

• Journal of Urban Science
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2020

Steps are very common features in our living environment. Unfortunately, the occurrence of accidents on steps is thus inevitable. A failed visibility to recognize a step remains the most common attribute in these accidents. In this research, sensory scales of step visibility were created in order to examine the effects of two factors on step visibility in sensory testing methods; observation height from floor and eye condition while viewing a step from the descending direction. Results of sensory tests revealed strong influence of eye condition on step visibility. Influence of visual characteristics of each step was also examined and clarified.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.393-395
• /
• 2005

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more $advantageous.^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, Super-IPS applying for optical film developed, but Super-IPS still has the problem of color shift in black $pattern.^{2)}$ So we improved this problem by developing Enhanced Super-IPS.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.51-54
• /
• 2005

Light Guide Plate (LGP) of LCD-BLU(Back Light Unit) is manufactured by forming optical pattern with $5\~100um$ in diameter on the LGP by means of sand blasting or etching method. However, in order to improve the luminance of LCD-LGP, the design of optical pattern has introduced UV inclined-exposure process in this study. This micro-optical pattern, which has asymmetric elliptical column shaped pattern, can change low viewing-angle to high viewing-angle, as well as it contribute to diffusion of light. As a result, this type of micro-optical pattern can introduce the highly luminance. The PR structure obtained in the stage of lithography has asymmetric elliptical column shape and it is processed into a micro-optical pattern. Optical design with this kind of micro-optical pattern, mold fabrication by electroplating and LGP molding with injection molding are under way.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.439-445
• /
• 2007

Stereoscopic viewing is an efficient technique for not only computer vision but also remote sensing applications. Generally, stereo pair obtained at the same time is necessary for 3D viewing, but it is possible to synthesize a stereomate suitable for stereo view with a single image and disparity-map. There have been researches concerning the generation of the synthetic stereomate from remote sensing imagery. However it is hard to find researches concerning the restoration of occlusion in stereomate. In this paper, we generated synthetic stereomates from remote sensing images, focused on the occlusion restoration. In order to figure out proper restoration methods depending on the spatial resolution of remote sensing imagery, we tested several methods including general interpolation and inpainting technique, then evaluated the results.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.651-654
• /
• 2006

Infrared channels of newly launched Japanese geostationary satellite, MTSAT-1R are compared with well calibrated MODIS/Terra infrared measurements at 3.7, 6.7, 11, 12 ${\mu}m$ bands. There are four steps in this intercalibration method: 1) data collection, 2) spectral response function correction, 3) data collocation, and 4) calculation of mean bias and conversion coefficients. In order to minimize the navigation error of MTSAT-1R, comparisons are made over the area in which the viewing angle of MTSAT-1R is less than 50$^{\circ}$. The calibration method was tested for August 2005 and within the 40$^{\circ}N$-40$^{\circ}S$, 100$^{\circ}$E-180$^{\circ}$E domain. The differences of spectral response functions were corrected through radiative transfer model simulation. Constructing collocated data differences in viewing geometry, observation time and space were taken into account. In order to avoid the radiance variation induced by cloud presence, clear-sky targets are selected as intercalibration target. The mean biases of 11, 12, 6.7, and 3.7 ${\mu}m$ bands are about -0.16, 0.36, 1.31, and -6.69 K, suggesting that accuracies of 3.7 ${\mu}m$ is questionable while other channels are comparable to MODIS

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.47-58
• /
• 2016

In modern era Busan, newspaper articles about cherry blossom attractions from FuzanNippo and ChosenJiho have changed from places of landmark cherry trees to recreational activities under the cherry blossom. This means that the place characteristics of the cherry blossom attractions helped transform modern Busan. This study is to clarify the real image of the cherry blossom attractions where they were and when it was established in modern Busan. In order to discuss the location characteristics and the timing of identification as it changed from cherry-blossom viewing spots to picnic spots under the cherry blossom, current articles published in the FuzanNippo and ChosenJiho were collected. This study results are as follows: First of all, cherry blossom attractions are located in private gardens, gardens at hot spring inns, public lands such as schools, temples, reservoirs and malls such as Dongnae hot spring and the Midoricho red-light district. The location feature was that they were found at the edges of settlement environments, at the interface of city and natural spaces in modern Busan. Secondly, newspaper articles about cherry blossom attractions gradually changed from cherry blossom viewing spots to picnic spots under the cherry blossom, which became the peak of the cherry blossom attractions in modern Busan. The main focus of cherry blossom attractions changed from cherry-blossom viewing to picnicking under cherry blossoms around 1920. This means that the establishment of cherry blossom attractions can be seen around 1920. Articles of cherry-blossom viewing picked up sites not easy to access such as private gardens and reservoirs, articles about picnic spots under cherry blossoms noted public places that everyone could access. Cherry blossom attractions sites became spring resorts in modern Busan.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.207-215
• /
• 2013

Objective: This study aimed to investigate important human factors that should be considered when developing ultra-high definition TVs by reviewing measurement methods and main characteristics of ultra-high definition displays. Background: Although much attention has been paid to high-definition displays, there have been few studies for systematically evaluating human factors. Method: In order to determine human factors to be considered in developing human-friendly displays, we reviewed subjective and objective measurement methods to figure out the current limitations and establish a guideline for developing human-centered ultra-high definition TVs. In doing so, pros and cons of both subjective and objective measurement methods for assessing humans factors were discussed and specific aspects of ultra-high definition displays were also investigated in the literature. Results: Hazardous effects such as visually-induced motion sickness, visual fatigue, and mental fatigue in the brain caused by undesirable TV viewing are induced by not only temporal decay of visual function but also cognitive load in processing sophisticated external information. There has been a growing evidence that individual differences in visual and cognitive ability to process external information can make contrary responses after exposing to the same viewing situation. A wide vision, ultra-high definition TVs provide, can has positive and negative influences on viewers depending on their individual characteristics. Conclusion: Integrated measurement methods capable of considering individual differences in human visual system are required to clearly determine potential effects of super-high vision displays with a wide view on humans. All of brainwaves, autonomic responses, eye functions, and psychological responses should be simultaneously examined and correlated. Application: The results obtained in this review are expected to be a guideline for determining optimized viewing factors of ultra-high definition displays and accelerating successful penetration of the next-generation displays into our daily life.