• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.644-650
• /
• 2001

A remotely located synchronization system which is locked to the remote master clock has been implemented by using GPS Common-View technique. The measurement results showed that the accuracy of the remote synchronization system could be kept within a few parts in $10^{-12}$ and MTIE(Maximum Time Interval Error) met the ITU-T Recommendation(G.811). A prototype system having fully automatic operational functions has been realized up to now and is expected to be used in the network synchronization in the near future.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.1-10
• /
• 1994

In the real-time delivery of multimedia data streams over networks, the interruption of continuity in a single media stream and the mismatching of the data within the same time interval in multimedia data streams transfered in paralled on different channels are considered as the most serious synchronization problems. There are several mechanisms proposed to handle these problems. In this paper, these mechanisms are analyzed and compared in various point of view by the computer simulation. According to the simulation results, it has been shown that the method which uses the segmentation and the method which uses the seperate synchronization channel are superior to the method which uses the synchronization marks in view of the real-time transmission and quality of sevice. On the other hand, it can be seen that the method which uses the segmentation is superior to the method which uses the seperate synchronization channel from a channel utilization's point of view.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.811-815
• /
• 2005

We theoretically studied synchronization of chaotic oscillation in semiconductor lasers with chaotic light injection feed-back induced chaotic light generated from a master semiconductor laser was injected into a solitary slave semiconductor laser. The slave laser subsequently exhibited synchronized chaotic output for a wide parameter range with strong injection and frequency detuning within the injection locking scheme. We also analytically examined chaos synchronization based on a linear stability analysis from the view point of synchronization based on a linear stability analysis from the view point of modulation response of injection locked semiconductor lasers to chaotic light signal.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.52-61
• /
• 2007

Networked embedded systems using the smart device and fieldbus technologies are now found in many industrial fields including process automation and automobiles. However the discrepancy between a node's view of current time and the rest of the system can cause many difficulties in the design and implementation of a networked system. To provide a networked system with a global reference time, the problem of clock synchronization has been intensively studied over the decades. However, many of the existing solutions, which are mainly developed for large scale distributed computer systems, cannot be directly applied to embedded systems. This paper presents a fault-tolerant clock synchronization technique that can be used for a low-cost embedded system using a CAN bus. The effectiveness of the proposed method is demonstrated with a set of microcontrollers and DC motor-based actuators.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.

• Journal of Digital Contents Society
• /
• v.12 no.2
• /
• pp.177-184
• /
• 2011

This study deals with Timing Synchronization of motion picture and music in film music's physical point of view. Timing Synchronization appears by using Click Track, which calculates time of picture and location of bar. We also can find Hit, the emphasis point of music, by computation Frame Per Beat and estimate the location of note per time. Hit can be placed at upbeat, but, because of music's characteristic, it is more convenient to composer when it's placed at downbeat. Therefore, this study suggests three methods to sync the music and picture. First of all, sync through time conversion, second of all, sync through tempo conversion, and lastly, there is way to sync through offset. These each methods have their pros and cons, so choice should be made based on the music's natural flow.

• Journal of Korea Multimedia Society
• /
• v.25 no.10
• /
• pp.1475-1482
• /
• 2022

Mickey Mousing perfect match between animation sound and image was an aesthetic in the field of animation, but since the 2000s, works such as and released by producers such as DreamWorks and Pixar have expanded the perfection of synchronization to irony. It also influenced the identification system of sentiment. It is time to view the directing attempt of these elements as a factor that changed the new paradigm of narrative, and related research is needed. In this study, the scene of was analyzed as a case study for the synchronization of animation sound and image components and the boundary direction on the recognition of identification between reality and fiction. Aesthetic recognition of the research work is based on the premise of real time and space perception, and the audience can recognize in the conceptual world as an integrated art by playfully producing fictional time and space. The direct antithesis of synchronization and identification was drawn to maintain the curiosity of the next scene by repeating selective concealment and disclosure of information in the direction of conveying an unfamiliar and heterogeneous feeling to the audience.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.261-271
• /
• 2009

Due to the recent rise of a need for 3 dimensional geospatial information on urban areas, general interest in aerial multi-view cameras has been on an increase. The conventional geospatial information system depends solely upon vertical images, while the multi-view camera is capable of taking both vertical and oblique images taken from multiple directions, thus making it easier for the user to interpret the object. Through our research we developed a prototype of a multi-view camera system that includes a camera system, GPS/INS, a flight management system, and a control system. We also studied and experimented with the camera viewing angles, the synchronization of image capture, the exposure delay, the data storage that must be considered for the development of the multi-view camera system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.4
• /
• pp.369-380
• /
• 2003

With the proliferation of a wireless support and the advances of mobile devices, there is a growing need of making it available for a wireless network as well. Low bandwidth of a wireless network is one of the major issues that should be considered for extending a synchronous collaboration system developed for a wired network to supuort a wireless network. We propose a priority-based view synchronization scheme, exploiting the relaxed synchronization. The proposed scheme leverages the fact that mobile users need not have the exactly same view as the users in a wired network since they usually have a limited screen size and thus focus only on part of a whole document. We evaluate the performance of a simple group editor with the propose scheme using ns -2. The performance results show that the proposed scheme keeps the message transmission delay low so that mobile users can have synchronous colloboration with wired users without signification delay. The proposed scheme is designed and implemented as a framework to support various kinds of realtime groupware applications, exploiting the existing groupware framework, Habanero. As a client program, we implemented a simple group text editor.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.464-467
• /
• 2000

In this paper we introduce the network based multi-motors control system using CAN(Controller Area Network) The traditional multi-motors control system has many problems in the view of reliability and economy because of the amount and complexity of wiring noise and maintenance problems etc, These problems are serious especially when the motor controllers are separated widely CAN is generally applied in car networking in order to reduce the complexity of the related wiring harnesses. These traditional CAN application techniques are modified to achieve the real time communication for the multi-motor control system. And also the position synchronization technique is developed and the proposed methods are verified experimentally.