• 한국콘텐츠학회논문지
• /
• 제19권9호
• /
• pp.666-673
• /
• 2019

몰입 가상현실 환경에서 사용자들은 다양한 가상객체들을 선택하여 목표로 하는 일을 수행할 수 있다. 사용자가 원하는 가상객체를 선택하기 위해서는 일반적으로 사용자의 시야에서 가상의 선분을 발사하여 그 선분과 객체가 일치되었을 때 객체를 선택하게 하는 Ray-Casting이나 여러 객체들을 동시에 선택해서 원하는 객체를 선택하는 Cone-Casting 기반의 객체선택 방법들이 널리 사용된다. 하지만 CAD에서 사용되는 가상객체들은 그 자체적으로 세부적인 작은 객체들로 구성되고 결합이 되어 있어서 사용자의 시야에서 원하는 객체를 기존 방법들로 선택하는 경우 사용자가 원하는 객체가 아니라 다른 객체가 선택되는 모호성 문제가 발생하여 원하는 객체를 선택하는데 문제가 발생하며, 그룹으로 객체를 선택하더라도 원하는 객체를 선택하기 위해서 결국 가상객체들의 위치 및 구조 등을 변경해야 하는 추가 작업을 해야 하는 문제가 발생한다. 본 논문에서는 가상객체가 여러 작은 세부적인 가상객체들로 구성이 되어 있더라도 이들이 가지고 있는 공간적인 연관 관계를 계산하고 이 연관 관계에 따라서 세부적인 가상객체들을 펼치거나 줄여서 사용자가 선택을 원하는 객체를 빠르고 정확하게 선택하는 방법을 제공한다. 본 논문에서는 본 논문에서 제안한 Adaptive-Casting 선택 방법과 기존의 Ray-Casting 과 Cone-Casting 방법들과 성능비교 실험을 하였다. 실험 결과 본 논문에서 제안한 방법이 사용자가 원하는 객체를 선택할 때 걸리는 속도가 가장 빠르면서 정확하다는 결과를 보여주었다.

• 환경영향평가
• /
• 제4권3호
• /
• pp.87-94
• /
• 1995

At both international and national levels, such as in the Rio Declaration and the EU's Fifth Environmental Action Plan, governments have committed themselves to the adoption of the precautionary principle (UNCED 1992, CEC 1992). These commitments mean that the existence of uncertainty in appraising policies and proposals for development should be acknowledged. Uncertainty arise in both the prediction of impacts and in the evaluation of their significance, particularly of those cumulative impacts which are individually insignificant but cumulatively damaging. The EC network of EIA experts, stated at their last meeting in Athens that indirect effects and the treatment of uncertainty are one of the main deficiencies of current EIA practice. Uncertainties in decision-making arise where choices have been made in the development of the policy or proposal, such as the selection of options, the justification for that choice, and the selection of different indicators to comply with different regulatory regimes. It is also likely that a weighting system for evaluating significance will have been used which may be implicit rather than explicit. Those involved in decision-making may employ different tolerances of uncertainty than members of the public, for instance over the consideration of the worst-case scenario. Possible methods for dealing with these uncertainties include scenarios, sensitivity analysis, showing points of view, decision analysis, postponing decisions and graphical methods. An understanding of the development of cumulative environmental impacts affords not only ecologic but also socio-economic investigations. Since cumulative impacts originate mainly in centres of urban or industrial development, in particular an analysis of future growth effects that might possibly be induced by certain development impacts. Not least it is seen as an matter of sustainability to connect this issue with ecological research. The serious attempt to reduce the area of uncertainty in environmental planning is a challenge and an important step towards reliable planning and sustainable development.

• 기술혁신학회지
• /
• 제17권4호
• /
• pp.629-650
• /
• 2014

최근 기술과 시장의 변화가 빨라지고 복잡해짐에 따라 기업경쟁력이 내부 역량뿐만 아니라 외부와의 다양한 형태의 기술협력을 통해 효율적으로 창출할 수 있다는 인식이 확산되고 있다. 기업의 기술협력 구조와 성과 결정요인으로 사회적 네트워크와 흡수역량이 중요하다고 지적되고 있지만 대부분의 선행 연구는 사회적 네트워크와 흡수역량을 개별적 요인으로 분석하였다. 본 연구는 기업의 사회적 네트워크와 흡수역량이 벤처기업의 기술협력 파트너 선정, 거버넌스 유형 선택, 성과에 미치는 영향력을분석하였다. 국내 215개 벤처기업의 설문조사 자료를 분석한 결과, 흡수역량은 과업관련 기준과 파트너관련 기준 모두에 영향을 주는 반면 사회적 네트워크는 파트너 관련 기준에 영행을 주는 것으로 나타났다. 흡 수역량과 사회적 네트워크는 기술협력 거번너스에 영향을 미치지 않는 것으로 조사되었다. 흡수역량은 기술협력 성과에 영향을 주는 반면 사회적 네트워크는 기술협력 성과에 영향을 주지 않는 것으로 분석되었다.

• 대한지구과학교육학회지
• /
• 제8권3호
• /
• pp.259-266
• /
• 2015

This study aims to analyze a selective examination for the gifted and talented from a domain-general and special standpoint. For this, we analyzed gifted and talented test results carried out by Gifted and Talented Education institute affiliated with the university of Education located in the central region of South Korea. This test consisted of three sections which are giftedness in the first round, academic aptitude in the second round and interview in the last round. I conducted the analysis of variance of the giftedness test result to the gifted and talented group in each subject from the domain-general point of view. As a result, the each group was not significant. This means that the gifted and talented in each subject has giftedness from the domain-general viewpoint. Secondly, I implemented the analysis of correlation among three test such as giftedness, academic aptitude and interview conducted during the selective process for the gifted and talented. The result was that they had a low or no correlations between them and were not significant. This demonstrated that each test checked a different area. That is, we came to realize that the first, second and third test evaluates a different area and in particular, with the result that the first and second test had a low or no correlations between both of them we realized that they evaluated a different area from a domain-special standpoint. The purpose of this study is meaningful to investigate in terms of how the selective test for the gifted and talented is conducted from a domain-general and special standpoint as a recent study viewpoint about the gifted and talented along with creativity. It is too limited to generalize this result because this test was sampled by one region but, this study indicates that we should take a domain-general and special standpoint into account when it comes to selection for the gifted and talented.

• 오토저널
• /
• 제14권6호
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.50-59
• /
• 2000

스테레오 영상(stereo image)이란 같은 물체나 장면을 담고있는 서로 다른 시점의 두 영상이며 스테레오 영상에서 깊이 정보를 얻어내는 것을 스테레오 비전(stereo vision)이라 한다. 스테레오 비전에서 가장 중요한 과정은 두 영상에서 서로 일치하는 점을 찾아내는 스테레오 정합(stereo matching)이다. 그러나, 스테레오 정합은 매우 많은 계산을 필요로 하기 때문에 실시간으로 정합하기 어렵다. 본 논문에서는 실시간으로 스테레오 정합을 처리할 수 있는 스테레오 영상 정합 프로세서(stereo image match procesor：SIMP)를 설계하고 구현하였다. 이를 위해 슬라이딩 메모리(sliding memory)와 최소 선택 트리(minimum selection tree)를 제안하였고 파이프라인 구조(pipeline architecture)와 병렬 처리 기법을 이용하였다. SIMP의 입력은 64 그레이 레벨인 두 개의 64×64 스테레오 영상이고 출력은 최대 7의 값을 가지는 변이(disparity)와 12비트의 주소로 이들을 이용하여 64×64 변이도(disparity map)를 구성할 수 있다. SIMP는 약 240 프레임/초의 속도로 스테레오 영상을 처리할 수 있다.

• 한국중재학회지:중재연구
• /
• 제18권2호
• /
• pp.33-54
• /
• 2008

The KCAB enacted their new international arbitration rules(the KCAB rules) in 2007 wheres The CIETAC revised their arbitration rules(the CIETAC new rules) in 2005. This article investigates some practical problems on both rules respectively and helps trading companies to proceed arbitration by these rules. This study finds some problems as follows. There are the following problems in KCAB rules. First, application fee is too expensive fee. So KCAB should cut down their application fee. Second, if there is no agreement on number of arbitrators, the arbitration is processed by sole arbitrator. But it is very difficult for sole arbitrator to process international arbitration due to characteristics of international arbitration such as complexity of case and a large sum of claim. Third, a period of selection of arbitrator is long. In view of developing of communication means, this period is needed more short. In the meantimes, there are the following problems in CIETAC rules. First, though the CIETAC new rules enlarges the right of parties autonomy such as selection of arbitration rules or revise of it, China arbitration Act stipulates a institute arbitration which restrict partie's autonomy. Second, if there is no agreement on arbitrators, the CIETAC appoints chair of tribural in three arbitrators ion or sole arbitrators. is processed by sole arbitrator. Third, a draft of arbitral award is checked by the CIETAC in advance. Especially, the two latter problems is possible for foreigners to have doubts of fairness of CIETAC arbitration. Becuase the CIETAC is not a complete independent private institution. Consequently, I suggest that Korean trading companies should examine problems of these two arbitration rules carefully, and select a most appropriate rules for settlement of their disputes with Chines companies.

• Architectural research
• /
• 제13권3호
• /
• pp.11-18
• /
• 2011

With the rapid development of computer technology and ongoing destruction of traditional buildings, more and more attention is paid to digital methods for the design and preservation of traditional buildings. Unlike 2D methods, Building Information Modeling (BIM) provides an object-oriented and parametric digital representation way for traditional building components. However, one of the main limitations currently is that parametric information cannot be exchanged between BIM software packages. Therefore each kind of software must have their own parametric library which causes extensive works. In this research, the authors developed an open BIM-based library using an XML parametric approach to solve the above problems, represented traditional components according to an XML schema, and parametrically implemented these XML files in a browser which can be accessed by users for their easy component edit and selection. And then based on the XML file of one component, implemented an Add-on in ArchiCAD for users to parametrically edit and directly utilize. Thus based on these XML files, a browser for users' view and selection purpose and an add-on for users' application purpose were developed. Future research will focus on implementing these XML files in other BIM tools like Revit and Digital Project. If the whole library was to be completed based on this XML approach, an open BIM-based library would be established that all kinds of BIM software users could apply this parametric library for easy modeling of traditional houses.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.319-324
• /
• 1998

Ocean Scanning Multispectral Imager (OSMI) is a payload on the Korean Multi-purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring for the study of biological oceanography. The instrument images the ocean surface using a whisk-broom motion with a swath width of 800 km and a ground sample distance (GSD) of < 1 km over the entire field-of-view (FOV). The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The instrument also performs sun calibration and dark calibration for on-board instrument calibration. The OSMI instrument is a multi-spectral imager covering the spectral range from 400 nm to 900 nm using a CCD Focal Plane Array (FPA). The ocean colors are monitored using 6 spectral channels that can be selected via ground commands after launch. The instrument performances are fully measured for 8 basic spectral bands centered at 412nm, 443nm, 490nm, 510nm, 555nm, 670nm, 765nm and 865nm during ground characterization of instrument. In addition to the ground calibration, the on-board calibration will also be used for the on-orbit band selection. The on-orbit band selection capability can provide great flexibility in ocean color monitoring.

• 디지털융복합연구
• /
• 제11권3호
• /
• pp.41-48
• /
• 2013

3차원 텔레비전(3DTV)는 이차원 텔레비전(2DTV)을 대체할 새로운 혁신기술로 여러 제조사로부터 다양한 모델이 출시되고 있다. 3DTV는 매력적 요소에도 불구하고 내재된 문제점, 제조사별 기술적 차이점 때문에 소비자들은 제품선정을 위한 복잡한 의사결정 문제에 직면한다. 일반적으로 구매자들은 제품 사양을 비교하는 방식을 사용하지만 3DTV 특성상 실제 체험한 후 선택하는 것이 바람직하다. 본 연구는 소비자들이 3DTV 구매 의사결정을 지원하기 위한 일련의 방법론을 제안한다. 제품선정 기준을 도출하고 계층적분석과정(AHP) 모델을 구축한다. 이용자 테스트 방법을 제안하며 수치적 예제를 통해 제품의 우선순위가 결정되는 과정을 보인다.