• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.349-359
• /
• 2009

In this paper, we propose a stereo-video transmission method for reduction of delay and maximization of 3D effect. Conventional multimedia synchronization algorithms were designed to achieve minimum delay and synchronize multiple video and audio streams, however, they could not be effective for 3D video transmission. In this paper, we proposed a synchronization algorithm by considering the minimum error of time difference between streams for 3D effect. The minimum error of time difference for 3D effect was derived based on a 3D subjective quality test. We compute display time of the delivered videos within the allowed time-difference and the video are displayed according to the display time. To evaluate the performance of the proposed algorithm, we implemented a real-time video communication system and subjective quality test has been conducted with the proposed system. We found that video quality displayed by the proposed system. We found that video quality displayed by the proposed algorithm ranks 'good' and 'excellent' in the DMOS (Differential Mean Opinion Score) scale, based on the MOS (Mean Opinion Score) test.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2089-2094
• /
• 2010

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.28-36
• /
• 2020

Due to the continued demand for high-definition video, video compression technology is steadily developing and the High Efficiency Video Coding standard was established in 2013. However, despite the development of this compression technology, it is very difficult to smoothly transmit VGA-level videos in Ultra-narrowband environments. In this paper, the target information preprocessing algorithm is presented for smooth transmission of target images moving in forest or open-terrain in Ultra-narrowband environment. In addition, for algorithm verification, the target information preprocessing algorithm was simulated and the simulated results were compared with the video compression result without the algorithm being applied.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.38-44
• /
• 2003

In this paper, we propose the method in which multimedia data simultaneously transfers to the main memory and the multimedia processor from the network interface card to improve bottleneck of system bus through analysis for architecture of video conference system and input/output model. The proposed method can reduce the number of system bus accesses, bus cycles, data transmission time and compression ratio of video data in the video conference system. We compared the performance between the proposed method and the conventional methods in the multi-party video conference systems. The simulation results showed that the proposed method was reduced the transmission time of multimedia data than the conventional method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2013

This paper proposes real-time video transmission system by the car-mounted cameras based on MOST Network. Existing vehicles transmit videos by connecting the car-mounted cameras in the form of analog. However, the increase in the number of car-mounted cameras leads to development of the network to connect the cameras. In this paper, DSP is applied to process MPEG 2 encoding/decoding for real-time video transmission in a short period of time. MediaLB is employed to transfer data stream between DSP and MOST network controller. During this procedure, DSP cannot transport data stream directly from MediaLB. Therefore, FPGA is used to deliver data stream transmitting MediaLB to DSP. MediaLB is designed to streamline hardware/software application development for MOST Network and to support all MOST Network data transportation methods. As seen in this paper, the test results verify that real-time video transmission using proposed system operates in a normal matter.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.21-31
• /
• 2014

In this paper, we propose VLC(visible light communication) based multi-hop multimedia data transmission system. The main contributions and features of the proposed system are as follows. First, the contribution of this research is to develope the LED communication based multi-hop transmission network system which can transmit multimedia data(audio data, video data) with long distance. Second, the developed system has the following features: In transmitter, audio data and video data are transmitted via multi-hops using two channels. The relay in audio channel receives digital audio signal by using photo diode and then transmits the signal to receiver after error checking and amplifying. The receiver receives the encoded audio data via photo diode and then converts to analog audio signal by using decoding and amplifying. The relay in video channel receives video signal by using photo diode and then amplify the video signal using OP-AMP and then transmits the signal to receiver. The receiver amplifies the received signal from photo diode and then sends it to the monitor. The performance evaluation of the proposed system is conducted in the laboratory with fluorescent light source. The results of the performance evaluation confirm that the system can provide high quality multimedia data transmission from transmiter to receiver via multi-hop relays in a long distance while we can see there are differences in the transmitted multimedia(audio and video) quality according to the used LED colors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1052-1057
• /
• 2007

A highly reliable Video Transmission System (VTS) was developed in order to obtain both video and digital data simultaneously in the real time flight test situation of a flying vehicle. The VTS integrates GPS data, digital telemetry data and video signals into a compact digital data package which is compressed and processed by an MPEG-2 Encoder and a DVB-S modulator respectively. The DVB-S modulator is composed of a specially devised Forward Error Correction processor and base band QPSK modulator. The designed VTS was verified and proved for its required functioning and performance through separate flight tests using an airplane and missiles.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.60-65
• /
• 2009

A highly reliable Video Transmission System (VTS) was developed in order to obtain both video and digital data simultaneously in the real time flight test situation of a flying vehicle. The VTS integrates GPS date digital telemetry data and video signals into a compact digital data package which is compressed and processed by an MPEG-2 Encoder and a modulator respectively. The modulator is composed of a specially devised Forward Error Correction processor and base band QPSK modulator. The designed VTS was verified and proved for its required functioning and performance through separate flight tests using an airplane and Rockets.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1197-1205
• /
• 2014

Recently signal transmission of ultra high-definition(4K-UHD) video system is transferred as uncompressed high speed data. However, this has a limit to compose the system because EMI between separate cables of high speed interface section and skew bring distortion of the video signal and jitter. In this paper we applied V-by-One HS interface technique to transfer uncompressed high speed data. We analyzed HSD(High Speed Differential) transmission line signal integrity. Also we applied RF transmission technique instead of UHD video pattern control interface PCB design. When we measured V-by-One HS video signal of designed 4K-UHD class signal generator, We found that the transmission performance has been signal standard.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.205-212
• /
• 2007

In this paper, we present a prototype of view-switchable high-definition (HD) multi-view video transmission system. One of the major bottlenecks for the multi-view broadcasting system has been the hardware cost and transmission bandwidth. The proposed system focuses on software-based design, transmission over IP multicast networks, and flexible system configuration to address aforementioned problems. In the proposed system, we implement software stereo HD multiplexing, demultipiexing and decoding, and take advantage of high-speed broadband convergence networks to deliver HD video in real-time. Moreover, the proposed system can be scalable and flexible in terms of the number of views. Furthermore, in order to display any multiview video on 3D display monitor, a face tracking system is integrated to our system. Therefore, users can watch the different stereoscopic video at its related locations.