• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2040-2043
• /
• 2003

General-purpose MPEG-2 video transcoders must be able to achieve any conversion between 18 ATSC (Advanced television system committee) video formats for DTV (digital television), e.g., scan format, size format, and frame rate format conversion. Especially, scan format conversion is hard to implement because frame rate and size format conversion often happen together. This paper proposes a fast motion estimation(ME) algorithm for MPEG-2 video transcoding supporting scan format conversion. Firstly, we extract and compose a set of candidate motion vectors (MV's) from the input bit-stream to comply with the re-encoding format. Secondly, the best MV is chosen among several candidate MV's by using a weighted median selector. Simulation results show that the proposed ME algorithm reduces significantly transcoding complexity with a minor PSNR degradation.

• 방송공학회논문지
• /
• 제8권3호
• /
• pp.288-296
• /
• 2003

ATSC (Advanced Television System Committee)에서는 18가지의 DTV (Digital Television)를 위한 동영상 포맷들을 제정하였다. ATSC 포맷들은 스캔 포맷, 크기 포맷, 프레임율 포맷 등의 적당한 조합들이다. 효과적인 MPEG-2 트랜스코딩을 위해서는 이런 포맷들 간의 변환도 지원할 수 있어야 한다. 여러 포맷 변환들 중에서 특히 스캔 포맷 변환은 프레임율과 크기 변화가 함께 일어나기 때문에 상대적으로 구현하기가 힘들다. 스캔포맷 변환으로 픽쳐 타입도 함께 변하기 때문에 트랜스코더의 움직임 추정부 (motion estimation; ME)에 상당한 연산량 부담을 주게 된다. 이런 문제를 해결하기 위해 본 논문은 스캔포맷 변환을 지원하는 MPEG-2 동영상 트랜스코딩을 위한 고속 움직임 추정 알고리즘을 제안한다. 먼저, 트랜스코더의 수신단은 입력 비트열로부터 재 부호화(re-encoding)에 적합한 후보 움직임 벡터들을 추출한다. 그런 다음. 가중치 중간값 선택기(weighted median selector)를 이용하여, 여러 후보 움직임 벡터들 중에서 최적의 움직임 벡터를 선택한다. 모의 실험 결과는 제안한 움직임 추정 알고리즘이 전역 탐색 기법(Full Search Algorithm: FSA)에 비해 현저하게 적은 연산량을 가지면서, FSA와 거의 동일한 PSNR 성능을 가짐을 증명한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권10호
• /
• pp.460-467
• /
• 2002

This paper proposes new motion vector re-estimation techniques for transcoding of heterogenous video coders. The first case is for transcoder of coding format. The coding algorithm with B-picture like MPEG standards is transcoded into the different algorithm without B-picture like H.261 standards. The second case is for transcoder of spatial resolution reduction. It generates a downscaled video bitstream at the video source. The third case is the integrated method that previous two cases are needed simultaneously. These three transcoding algorithms are compared and verified though reconstructed image quality in PSNR, motion vector errors between optimal motion vectors of cascaded trans- coder and motion vectors estimated by proposed methods and the amount of operation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.71-74
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+PlusII and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.11-23
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL, simulated on Max+plus Ⅱ , and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation techniques according to simulation results and implementation.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 춘계학술대회 논문집
• /
• pp.91-95
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats to a target format. Circuits for the conversion has been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+Plus II and implemented with an FPGA cpip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.194-197
• /
• 2005

Digital display products are gradually becoming diversified and pursuing high-quality image display. Digital TV supports various video signal formats from conventional SD to digital HD because the format conversion of video image is required. Traditional format conversion of the video image is achieved by a 1-dimensional linear interpolator applying both horizontal and vertical direction. Jagging artifact can be expressed as the linkage of line segments in several directions. In this paper, we present the method that removes jagging artifact effectively using PCA (Principle Component Analysis) and reserve the detail in a given image.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2126-2130
• /
• 2003

In the integrated systems, that is integrated digital TV(DTV) internet and home automation, like home server, is needed integration of digital TV video signal and computer graphic signal. The graphic signal is operating at the high speed and has time-divide-stream. So the re-request of data is not easy at the time of error detection. therefore EDAC algorithm is efficient. In this paper, we show a scheme, that is integration of graphic and dtv format signal for DTV monitor display. This paper also presents the efficiency error detection auto correction(EDAC) for conversion of graphics signal to DTV video signal. A presented EDAC algorithms use the modified hamming code for enhancing video quality and reliability. A EDAC algorithm of this paper can detect single error, double error, triple error and more error for preventing from incorrect correction. And it is not necessary an additional memory. In this paper The comparison between digital TV video signal and graphic signal, a EDAC algorithm and a design of conversion graphic signal to DTV signal with EDAC function in DTV system is described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.347-350
• /
• 2002

Transposed scan is an innovation that paves the road to ultra-slim CRTs with deflection angles up to 135$^{\circ}C$ We discuss the integration of video transposition with the other video processing functions in the television set. An in-place transposition algorithm which minimizes the amount of frame memory is proposed as a low-cost solution for transposed scan conversion. The difference in visual perception of transposed scan and normal scan depends on the frame rate and the line density of the video format. We found that for high frame rates and high line densities, no difference was perceived for both scan modes.

• 한국통신학회논문지
• /
• 제32권8C호
• /
• pp.729-737
• /
• 2007

가장 최근에 표준화된 H.264/AVC 동영상 압축 부호화 방식은 기존의 방법인 MPEG-2에 비해 우수한 압축 효율을 보이지만, 아직 많은 응용분야에서 MPEG-2가 적용되고 있기 때문에 MPEG-2에서 H.264/AVC로의 변환 기법 개발이 필요하다. 본 논문에서는 이러한 변환을 위해 가장 첫 번째 단계로 볼 수 있는 DCT 계수에서 H.264 변환 계수로의 변환을 위한 효율적인 방법을 제안한다. 이러한 변환은 영상의 압축을 위한 변환기술로 MPEG-2에서는 $8{\times}8$ discrete cosine transform(DCT)를 사용하고 있고, H.264/AVC 표준안에서는 $4{\times}4$ integer transform을 사용하고 있기 때문에 필수적이다. 제안하는 알고리듬에서는 부호화 성능을 유지하면서 효율적으로 계산량을 감소시킬 수 있는 방법을 제시하고 계산량 분석과 모의실험을 통해서 이를 입증한다.